Msfs2020*Huge Performance Increase w/ this Hack*De-Bloat your Nvidia Driver & Gain FPS! Game CHANGER
ฝัง
- เผยแพร่เมื่อ 29 เม.ย. 2022
- ********Revision has been made see link • Msfs2020*Revised For M... ***********************
Hello everyone i came across this info im about to share with you the other day and after trying this out WHAT a GAME Changer. I could not believe the performance increase that i got out of de bloating my nvidia driver. To note you must be willing to give up the geforce exp but it is well worth it in my opinion. I will walk through every stem in which to do this properly and remember that you can always go back to the original version just run the nvidia driver file you downloaded from the web and select custom install and check fresh install and you are all back to original. Keep in mind also that millage may vary and what gave me great results may only give you a little and vise versa. This was such a mind blowing experience i just had to share this with everyone and i hope this treats you as well as it has for me. Please leave any comments below and like share and subscribe to the channel.
• Msfs2020*Sim update 11... SIM UPDATE 11 video
www.guru3d.com/files-details/... Display driver uninstaller
www.techpowerup.com/download/... Nvclean install
www.nvidia.com/download/index... Nvidia driver
• Msfs2020*BEST Graphics... Best graphics settings sim9 update
• Msfs2020*OpenXr ToolKi... Openxr toolkit tutorial
For custom VR lenses Check out this link and use the discount code to get 5% off your order! www.vr-rock.com/?ref=2020fsers
5% discount code: 2020fsers
Check out our facebook page / 1081420896026970 - เกม
What an improvement. Thank you so much for making this video, my performance around New York was awful beforehand seeing a max of 15fps, now its at 35 (fps locked at 36). Outstanding, subbed!
Awesome thanks for the update and thank you for the comment 👍 😀
I want to thank you for your work on this. Worked great. I have added between 5-10 FPS in VR which has enabled me to add to the render scale and thereby the quality. I am on a 3090 and a i9-10900k. I have noticed it has done a good job reducing anti-aliasing/shimmering in the mid range, which kind of broke some of the immersion. Still there but its better. So thank you again for all your effort here ;-)
Very welcome thank you very much for the comment 😀 glad it worked for you
I just posted this on Overkill's site to thank him for promoting this video. This worked great (and unfortunately the two words that follows are the most hated in FS circles...) "for me". I used to fly around Los Angeles, but somewhere around SU8, I started getting severe jitters, and my FPS sometimes dropped to 10-15 when at an airport. I gave up and started flying out of Seattle, which is still a bit jittery but not as bad. I followed your advice and got a jump to the low 40's at Burbank, which is where I had really bad performance before. As others have mentioned, it could simply be the deinstallation of GEForce Experience and/or the clean install that did it more than anything else, but wow... this allowed me to increase my OLOD and TLOD also where I had to reduce them because of the jittering.
You sir, are a steely-eyed missile man!
Lol love the comment thanks very much and ps sorry for the late reply
I had 10 x nVidia containers, however, I couldn't see that any of them were using grahics resources in task manager. I uninstalled GEFORCE Experience and I only had 2 x nVidia containers but I didn't get any improvement in FPS flying in Cessna 152 from City Airport London. I am running i7 and RTX 2070S non-VR 2560x1440 with all FS2020 settings maxed out. I will try the full set of steps sometime to see what happens.
That's really strange. But it does affect everyone differently thanks for the comment
Watched both your videos on this and can report MAJOR jump in smoothness and about 5-10 fps generally so far. Back on FSX with Win7 I was very much a clean safe mode driver install guy every time so nice to start that again now with Win11, def makes a huge difference cutting all the "GF experience" bloat out. Thanks
Great to hear thanks for posting your results 👍 glad this worked for you.
I am happy to confirm the same results!
Dude, thank you so much. I've had such great results using this method, combined with the OPENXR toolkit. Best VR performance so far. FYI, I had like 13 processes before and now I have just the same you have. It really was a game changer for me. Thanks again man. You rock.
i really appreciate the comment and i am so happy this is working for everyone. Its crazy when you see all the extra processes in the background from nvidia and the lag it causes ugh. don't need to worry bout that anymore lol happy flying !
Well well well. Finally someone who knows what he's doing. I followed your video to the letter. Jumped from 25fps to 41fps. No more stutters. My rig consists of i7 4790, 16gb Ram, RTX Quatro 4000 8GB Graphics running 3440 x 1440 at 144 Hz. If you ever come to Western Australia I'll buy you a beer or two. Thanks Mate. You have a new sub.
Hey thanks so much I'm happy this helped you .. thanks for the sub . My wife and I have always wanted to visit Australia maybe 1 day lol thankS again .
Wow, thanks very much for taking the time to put this tutorial together. You're right, a complete game changer and definitely the best tweaks I've ever made for MSFS.
Hey thanks for the comment I'm happy this helped you 😀
After watching both of your videos on increasing the graphics performance for MSFS, I have to say I was quite impressed with the FPS increase I would the game runs at least 20-25% better, it's like my GPU is on steroids now. I was quite skeptical at first thinking this was another video of someone selling snake oil, but I was clearly wrong. You have gained me as a subscriber now, that is for sure!
I use snake oil in my hair 😆. Jk thanks very much for the comment glad it helped you.
The best tutorials I've seen on the subject. A week ago I bought a 3080ti and was disappointed to find that it only managed to get 15fps in New York. I have followed your recommendations and the improvement is impressive: 34fps and I have some settings higher than yours. And I still have to make the OpenXR settings.
Thank you very much for sharing your knowledge.
Very welcome . That's how we all get better by each of us spreading the knowledge around. Thanks again for the post
Wow, I am so impressed with how much better my VR is in msfs! It made a huge difference on the smoothness of the flights. Thank you so much!!!
Very welcome 😀 glad it worked for you .
I was running 4K already smooth as it was, i came upon your video after a recommendation and i must say...it's definitly made it smoother. I can bump up a few other settings with this too! Came in super handy, made my sim more eye candy
Great that's fantastic thanks for the comment 😀
Thank you so much! before I did the stuff in this and your other video, I could only run msfs on vatsim with low settings and vsync set to 20 fps and if I tried to set it higher it would ctd when I ran vpilot, but now I've been able to play on ultra with it set to 60 fps and I'll get like 40-60 fps with no stuttering or ctd when using vpilot
Awesome thanks for the comment 😀 glad it helped you
I was in the 20-25FPS range and now I’m at 50+! Thanks for the great video!!
Awsome thanks for the comment glad it worked for you 👍 😀
There have been many videos claiming to improve MSFS and VR performance, so I was sceptical when watching this video., however(!), following the steps in this video really improved the VR experience. I am amazed at the improved FPS and visual quality the *hack* NVidia driver and the OpenXR toolkit gave. Thank you for the video.
Awesome thanks for the comment 😀
Thanks for the Nvidia Performance Hack. Really didn't increase my framerate that much in MSFS but your previous video regarding the adjustment of the Nvidia Control Panel did make a big difference. Increased my framerate by 40%. Getting back to the performance hack; it did unexpectedly fix an issue I was experiencing with Adobe Photoshop for the past three months. Photoshop stopped working because it did not recognize OpenCL. After extensive troubleshooting with the help of both Adobe and Nvidia customer service yielded zero results. I was about to give up when I saw your video in regard to the Nvidia Performance Hack. After running the processes outlined in your video, I decided to try ONE LAST TIME to try and run Photoshop. Voila, Photoshop opened without error and the OpenCL file box was checked. I can now use photoshop thanks to you, my friend. Keep up the good work regarding MSFS. Your performance instructions are a true boon to all Flight Simmers.
That's awesome to here that . Thanks for posting this.. now you can use photoshop !
Mate thank you so much I went from 15-20 FPS at Heathrow now I get 40-50!!! Legend mate
great to hear thanks for posting!
Excellent. Thank you. Very clear to someone who's IT challenged.
Great thanks for the comment
Thanks !! This truly helped a lot for my streams! Appreciate the video and a very thorough explanation!
Your welcome thanks for your comment 😊
😄Thank YOU! I watched the entire video and carefully took notes and screenshots. I can say that I certainly appreciated it, but I have to laugh because it wasn't until the end of the video, when you mentioned that the Nvidia Icon in the system tray will "No longer show the GeForce Experience", that I realized my Nvidia icon doesn't show the GeForce tattoo!
I then remembered that I never installed any of those options! I suspected them to be bloatware back then and decided not to enable any of them.
Therefore, I already had the GeForce Exp 'out of the picture', but I haven't tried FS 2020 since I've installed it (just recently) because I wanted to get all my 'ducks in a row' first. I've been a long-time FSX Flight-simmer for about 9+ years and was aware of what all those little 'free options' could do to a system, (even to the ones that I custom-build).
Still, there were some steps that you showed in the video regarding selections made before installing the driver (like, "Enable DLSS Indicator" or "Show Expert Tweaks", etc.), that I'm sure I never selected when I installed my 3080Ti. So, I plan to try going w/o using this procedure and if I experience any issues that you said your video addresses, I'll just go on and do it!
I know that it wasn't a waste of my time to take all those notes and screenshots because I may need the notes anyway. If not, well, I learned something and that's a "plus".
Thanks again,
Rich
Hey Rich thanks for the comment .. sorry it won't help to much because you were smart already to not install GeForce 😉
Couldn't get any FPS boost, however, it does feel smoother. Also, good to learn about Nvclean, and the process, thank you, subscribed.
Hey thanks a bunch ☺️ the main take away of the de bloat is the smoothness some people get an fps boost others don't. But hopefully it will be smoother flying for you .
Tip, if you haven't used the tool program. I've been testing reducing resolution. G2 is way over sampled. I reduced it to 80% with no loss of quality.
Your brain may try to tell you it looks worse, our human nature greedy for eye candy, but you can pop back and forth out of VR and disable the tool. You'll see no real loss of quality. It's just things you were ignoring as normal stand out when you are looking for flaws.
You are a hero!!!! Send Overkill Simulations a nod as he’s bringing his followers to you!!!
I know ,I commented on the post he made and really he did not have to do that but I really appreciate that he felt the need to do so. Great guy
Many thanks. This video and the previous one has been superb. Keep up the good work.
very welcome thank you for the comment
I came here from @OverkillSimulations channel. Great content and I will certainly be using your tips here later when I am able to flight sim. Thanks much for the effort you put forth in this video and the time you took to do the work for everyone! Cheers!
Thanks so.much for the comment 😀 let me know how it works for you
@@2020fsers So I went through both of your videos and I feel that I should've stopped after this one and checked the fps before adjusting my gpu settings (your other tutorial). That said, I'm going to have to go back and reset my settings as I'm getting 60+ fps while flying in the Alaskan bush but that said, the natural beauty is now very cartoon-ish and awful. Then while flying at JFK it dropped way down to the high teens and was pixelated in areas. So I'll have to take some time and go back through the settings in both the sim and gpu. I'm using a lowly Nvidia 1070, btw. Thanks again for these great tutorials, I'll let you know more after making adjustments.
Yes you don't want to make to many changes at 1 time this way you will know what is doing what .
@@2020fsers actually, it was nothing. My dumbass forgot to reset the monitor settings on my gpu after reinstalling the nvidia drivers. HA! Everything looks great now. Not seeing too much increase in fps but I did also sharpen the terrain and objects a bit within the game so I'm sure that's it. All looks great now also with the coloring. Its not as washed out looking as it was before and is a bit bluer now. Thanks so much for these tutorials. The next one will be organizing my addons. Thanks again for the work and effort you've put in here.
You very welcome and I am happy you got it figured out happy flying . 😊
This was Perfect, along with your previous video. I am working with an ASUS Prime Z690-P mobo, i9-12900K, Gigabyte RTX 3090, and 128GB DDR6 ram, and this helped tremendously!!!!! with my system i couldnt figure why MSFS wasnt all i expected.... turns out its all in the details aka settings. i am in love with my Reverb G2 AGAIN.
I'm happy these helped you thanks for the comment
I have a very similar system to the one featured in the video with a Reverb G2 - I have rear projection on in XR tools - the VR framerate in the latest landing challenge went from 30 to 46 after I followed this tutorial - highly recommended!
Hey thank you for taking the time to post this . I'm happy this worked for you.
Sweet- can’t wait! Rog strix3080ti coming in the mourning!
Hands shaking in anticipation when I get home. Must get better frames in msfs and DCS.
It is amazing how wasteful these people are towards their own hardware and drivers. I remember when drivers were drivers only.
Great 👍 let me know how it goes . Thanks for the post
You know? Since I got my G2 last weekend, I havent ONCE looked at my FPS. I have no idea what it is.
Thanks very much for putting this tutorial together.
Your welcome thanks for the comment 👍
Before I writing my comment, I went to see what others have said, and it sounds like I am only echoing the thoughts here. What a difference these steps made for me!! I think a party should be hosted in your honor for sharing these tips, and for anyone who gets nervous by this process, it was not nearly as painful as I expected it to be... and considering the outcome, it was MORE than worth it!! Thanks for sharing your knowledge.
Thank you very much for the kind words. I'm happy that this worked for you 👍 😀 thanks again
Awesome!!! Worked like a charm. Thanks so much for this!!!
Very welcome thanks for the comment 😀
I was getting micro stutters, especially on short final which would cause hard landings. Something that shouldn't happen being that I run a RTX 2070 Super and AMD Ryzen 5 3600X 6-Core processor.
After following this tutorial, i flew over NYC from JFK Intl without ANY framerate drops or stutters!
With every graphics setting cranked to the max except shadows set to 1024. For whatever reason shadows seem to hit this game regardless the PC horsepower.
I simply cannot believe Nvidia bloatware caused all the problems I was having. Shame on them!
fantastic glad this worked for you and thanks for posting
Great video detailed and very well explained. I guess when new drivers come out for nvidia you do the whole process again. And by the looks of it, it will help with most if not all games not just MSFS.
Q) fairly new PC, and I've never installed Geforce Experience and just installed the drivers, I only have 2 containers in my task manager, do I need to go through all this process ? Will it actually benefit me much?
You will probably benefit from the ddu but not really if you only have the 2 containers. And yes you would do the process over on new updates
Thanks for the comment 😀
Wow. This made an incredible difference! Thanks for posting this! When a new driver comes out, do I redo the whole process each time?
Thanks for the comment yes you would repeat the process.
Thank you for this! Felt the boost in performance immediately on all my games. :D
That's great thanks for the comment 👍
I have gained 15-25 frames in VR in DCS !!!!!! cheers mate!
Wow so happy this is making an improvement across other vr Sims I also heard the same for train Sims. Thanks for posting
Hi Thank you for this tutorial and the time you have spent producing it.
I have followed your suggestions and the sim looks pretty good. I now have an issue in that when I open another program, little nav map. Navigraph, discord etc my fps drops from 35/40 down to 15. I have not had this problem previously. I guess I need to roll back some of the settings in Nvidia, but which ones?
That's strange when it happens what does the fps tool say you are limited by. Removing GeForce from the driver should not cause this issue. What I would do is hit the restore button in the nvidia control panel and start by changing 1 thing at a time and see what you get. Thanks for the comment 😀
@@2020fsersHi, Not running VR and "limited by main thread" I restored the Nvidia settings and the issue is solved. I will go through the settings 1 at a time. The good news is I have a performance increase by following the DDU/NV clean install of about 10fps before even adjusting the Nvidia/Cfg file/Windows settings 👍I am running on a i5 with a 1080ti so my processor is always going to be limited I guess . Is it ok to adjust the Nvidia settings with the sim running?
Ok that is better news. No you cannot make changes while the sim is running and that's why this part could take you a while. But when you find out what caused the issue can you let me know so if someone else has the same issue I can advise them. Thanks again .
@@2020fsers Hi , so after applying the suggested Nvidia settings 1 at a time the problem occurs after setting the Background Application Max Frame rate to on and 30. This causes an immediate reduction in frame rate down to 15 when any other application is opened. Now off and all good
Great good news I never use that setting .
Bloody brilliant. Thank you so much. Might be a faff to do but certainly worth the end result. Thanks again.
Very welcome thanks for the comment .. I will be doing an update to this as some settings have changed in the programs . Glad it helped you .
Bro you just made my day sooooo much better and for that you just earned a new sub! ❤❤❤
Awesome thanks for the sub 😀 gladnit helped you
You can do Control + Shift + Escape to open the task manager directly without having to go to the blue menu.
great info thanks
well, you learn something new each day. ta
Or right click on the start button and click "Task Manager".
I always used ctrl/alt/del or did it change for windows 11?
@@Muckylittleme that goes to the blue menu, where you then have to click open task manager. Ctrl+shft+escape opens task manager right away
Judging by the comments this tip actually works so I'll have to give it a try. What I find nearly unbelievable is that a graphics card company would add sfuff that diminishes the user experience - and so dramatically too! Incredible! And as someone else already said, shame on them.
Thanks for the comment please let me know how it goes for you . 😊
Amazing how much of a difference this made, thank you!
Very welcome 😀
What a Chad for sharing this stuff man. This is night and day difference on my system.
Thanks so much for the comment.. happy this worked for you
Can I put this video on community post on my channel and give you credits? Good one and I'll try it out later :)
Sure thing 👍 thanks for asking anything to help the community
Wow, this really has made the 30-40% performance increase (I've also followed your other videos for OpenXR and other VR settings). Flying a helicopter I'm now able to fps of 35-40 with quite high quality settings. But what was even more of a surprise, was that with low quality settings I could use VR with fly-by-wire A32NX getting fps of 30-35 (sometimes higher). I'm using an RTX3060Ti and Quest 2 from Oculus
One small problem is that I've noticed that the upper left segment of the left eye is blurry sometimes ... like looking though a glass bottle. What might be causing this (it's strange to me that it's one segment of one eye)?
Thanks for the comment happy this helped. You may need to mess with the ffr in the openxr toolkit . You can turn ffr off and see if the blurriness has gone away if so then you just need to tweak those numbers probably the vertical and horizontal offset.
Decided to leave FFR off completely. May come back to it later. Still amazed that I am getting 35-40 fps with VR in the A32NX (after thinking that the NVIDIA GPU and Oculus Quest 2 would not cope and had been a wasted investment). Really recommend your guides to anyone struggling with VR (and with a NVIDIA GPU). Thanks again
@jonathantill6691 your welcome
I've been using DDU for years. And it already gives you a safe reboot option and an option that disables windows to automatically update the video driver after the next reboot.
So you don't have to worry about internet connection if you check those options when you start DDU
All in all a great video
The rest of what you described, I just intend to try.
Thanks for the detailed explanations in both videos
Hey thanks for the comment I also saw those boxes to check but I don't like to rely completely on software so I do some things manually just to make sure all gets done I think I did check the no updates box but as a safe guard I still turn off internet . Thanks for the comment 😀 hope it helps you .
This worked like magic. Don't know how to thank you . Please keep up the good work
Thanks very much 😀 glad it worked for you
completely useless without metrics compared before and after...
Not really as my metrics will be different from yours as well as all the other settings that you may have different than mine and your system is most likely different than mine . The only thing you can go on is mine and all the others comments about the performance increase like i said in the video i didnt take a before video because i didnt think there would be a difference at all, suprise to me. So you could try it and benefit, probably pretty well or don't and continue using as you are your call.
@@2020fsers placebo effect is a very powerful thing.
Overkill simulations recommended your channel about a performance boost, and I can't believe it actually worked. On my rtx 2060 + i5 10300h 16gb ram, I used to get 15-30 fps with a mix of high, ultra, and medium settings; currently, nearly all settings are in ultra, and I get a stable 30 fps (on laptop). Thank you for this tip.
Very welcome glad it worked for you thanks for the comment 😀
@@2020fsers Just wanted to warn other laptop users like me that might experience what I had, high battery drain. This method worked to bring smoother and higher fps but I recently noticed when I unplug my laptop to use on battery, it was quickly draining. From 7 hours of battery use to less than an hour. I did a clean install with the latest driver but the issue still persisted. So I did DDU again and then clean installed just using the normal Nvidia method and installed GeForce experience and now my laptop battery is back to normal, lasting 7 hours. I would recommend this only to people who don't use their laptop battery and desktop users. Had to sacrifice the fps gains and smoothness for my battery. 🥲
Thanks for this info I do have a work around if you want to try it. Run the ddu again and then run the original driver from nvidia run the setup select custom install then make sure to not select GeForce experience. This application is not 2hat caused your battery draw it is other parts of the driver that we don't install using the nvclean so this way should work for you .
I really want to thank you so much for this I have a 2080 graphics card and run VR mostly what a difference this has made I was running in the 35 FPS and now I'm in the high 48 to 50 FPS
That's such great news thanks for posting your results 👍 😀.
so helpful, thanks much! clear and great tutorial
Very welcome thanks for the comment 😀
Awesome work. Added about 5fps in and around some of the detailed areas i fly in. Thanks so much.
Your welcome 🙏 thanks for the comment
I do VR... but mostly xplane....but getting my ROG STRIX 3080ti tomorrow! Can’t wIt to try it out with your settings. I can’t stand not being in VR so I mostly fly xplane. Thanks for your efforts. I’ll be watching tomorrow night after new video cars is installed!!!!
Hey that's always a great day with a new gpu. Let me know how it goes thanks for posting
Well, you do know that MSFS 2020 supports VR?
Yea but VR IN MS is awful. Even with a 3080ti. I am smooth as silk on ultra settings
Always good to remind people about doing this, I've been doing this for years. Thanks
Man I was missing a lot lol glad I made the move . Thanks for the comment
Does the same software keep working, or constantly having to hunt down updates. I hate all the waste they create to 'help' you. Help me by not bogging it down with garbage.
You have to download new drivers from.nvidia . That's all I would say you probably don't need to run ddu every time but it's a good idea . If you don't make sure you check clean or fresh install in the nvclean install program .
I am completely amazed by this. I’ve been so frustrated by my vr speed and graphics. I’ve now got nearly wide open graphics with 45 fps. Thank you so very much.
Also, I’m running an asus motherboard, RTI 3080, 32 4DR and the I7, so I had no idea that this was even possible.
Awesome thanks for the comment
Changed the game for me completely. 50+ fps in the Fenix Block 2, PMDG 737, and FSW Lear, in complex high resource areas like LAX, Vegas, NYC. Thank you.
Your welcome thanks for the comment 👍
Doing this not only made my sim run wayyyy better but It also fixed my crash to desktop issue! Thanks!
Very welcome thanks for the post . Glad it helped you
I absoutely love your videos! Clear, concise, and easy to follow! Anyone tell you that you sound like Jimmy Kimmel? :D
Hey thanks for the comment 😀 no i haven't heard that before lol 😆 I was a big fan of the man show.
This is definitely an intriguing video--learned something new I hadn't noticed (all the extra instances) or knew was out there before (Nvclean). My system showed about 6 instances of the driver running initially and had heard before that GeForce Experience was generally a parasite on one's system... so was excited to see how much boost I could get. I'm now down to the 2 instances like what you show in your video, but my frame rate has dropped about 5fps... granted I probably didn't do a great job of isolating the exact conditions (just same airport, and altitude with the drone camera); but perhaps with live weather, I had more clouds in the scene after using the Nvclean compiler? In any case, logically it seems one's system should perform better with less overhead running... So, thanks for the tip!
Hey your welcome also if you turned on raytracing in the config turn it back off and see if that gives you the 4 fps back.
@@2020fsers I had raytracing on both before and after--using same settings from your other video... but thanks for suggestion.
Sure thing just trying to think of anything that may help.
@2020 fs'ers That's Perfect. Followed you step by step and also changed the settings from your part1.. Its amazing dude.. I used to have around 25fps on my menu screen and BOOM now i have 50, used to have 20 - 24 on ground or at gate ..Now having 30 - 35 with ease and at around 35 - 40 while flying (Pretty enough for a flight sim with live traffic and moderate ground traffic settings)... :) Love your work my friend.. Appreciated. :)) Thanks
A small confirmation, Shall I continue the steps from NV cleaninstall for a new driver release right?
Hey thanks so so much for the info you posted on your results it really is amazing . So to answer your question yes you would do the same process on further updates to the nvidia driver . 😀
Just wanted to give you an update..
My specs are..
Asus tuf gaming a15
Ryzen 7 4800h
8 cores
16gb ram
GeForce 1650 4gb vram
Msfs 2020 running from 1tb internal hdd
Note: For my device.. Using Ray tracing (making the value to 1 in cfg) is causing a drop of fps by 2 to 5 frames.
Turning Ray Tracing off is giving me the above fps (as in the previous comment I have posted)
Hope this might give you an idea of what laptop users can observe... Just FYI.. Thanks..
ok great thank you for posting this i will now have to experiment with raytracing again and see if i am also getting an fps hit . asobo keeps changing how things react in the sim and we have to constantly re check everything to see how the settings react again with updates.
I am running a 1080 with 7700k an 32 gig ram. I did half of what you said in one video, I went from bouncing between 12 and 26 fps to a solid 31. Thanks man I’m gonna keep going with these
Awesome 👌 thanks for posting this 😁
@@2020fsers happy to help. Btw I spent the entire night flying the FA18 in the new activities I am close to world top10 on th low fly missions
I've been trying to just rank in those challenges lol.
Hi there. Thanks for your time on this. I wondered if you could pls give me some advice - I’m getting terrible shimmering on buildings etc in VR. I’ve changed sharpening to 0 but it’s still bad. 3090 card with your settings and an Aero VR headset. Thanks 🙏
Ok in the nvidia control the texture filtering option turn both off . Trilinear and anisotropic. That will help but I still get that shimmer almost an over sharpening or aliasing on object it weird. Also try setting anisotropic filtering to 16x in nvidia panel instead of in msfs2020. Let me know if any of this helps
I allready had very good Performance on my gtx 1080 but this just made it even crayzer, thank you Brother :)
Your welcome 🙏 I'm so happy this has worked for so many . 😊 thanks for posting .
Ryzen 7 3700x & RTX3060. Huge increase in VR 'G2 reverb' here. thank you so much for your efforts
.
Very welcome thanks for posting
Sent over from ROADKILL..... lol good job man
Hey thanks 😊 great guy there .. glad you enjoyed the video .
Wow...Thank You very much for this great Tip. I make it like You Show and it works perfect! On my (Not so fast Laptop with GTX 1650) and on my Desktop with RTX 3070 the Performance get about 10FPS better than bevor. (With latest NVidia driver). Thank You. 👍👍👍
Your welcome thanks for the comment 😀
Thanks for the video (found it through PMDG forums). First question that came to mind though, is how do we update the video driver? Is it the exact same procedure or is there a different way (faster) to update?
I just updated yesterday and used the same process . It really it's to vad once you do it a couple times . The ddu is very crucial to make sure all previous versions are removed and the registry is cleaned . Thank you for the comment I hope it helps your siming
Want to greatly thank you. Between this video and your bar video I have boosted my FPS from 35-45 to 65-90 In MSFS2020 VR. Max resolution oculus quest 2, rtx 4080, i7 11700k.
That's great .. thanks for the comment enjoy vr 😀
Nice Warp Speed intro. Have a great day.
Hey thanks for the comment & you have a fabulous day as well !
I don’t have MFS but have tried this with both automobilista 2 and assetto corsa competizione and amazingly I can run both in 4k with my
Graphics card Nvidia GeForce Gtx 1080 Ti card where previously it just wouldn’t be playable. Thank you for this.
Great to hear in had no idea it could be useful on other platforms. Thanks for posting.
Here from Overkill. Subscribed
Welcome aboard thanks for the sub
Great video. Insta-subbed!
Thank you very much . 😊
After both Videos...and upgrades...although my framerates did not improve...FS is MUCH smoother and better looking !!! Thank you SOOOO much.
Great to hear some users get an increase in frames and some don't but the common theme is smoothness I'm glad this helped you 😀 thanks for posting
I can't wait to try this! I have stutters in VR that I can't get rid of, I have tried everything, and this is on an i7 10700 with a 2080ti that scores over 15,000 in Time Spy, so it should be pretty good! Unfortunately my whole family has Covid at the moment, so I kind of feel like crap, so it may be a few days before I get to try it. I will let you know the outcome when I do!
Hey thanks for the comment 1 thing I can advise before you make changes is to mess with 1 thing at a time so if something happens you don't like you will know. Like make changes in the msfs first. Then maybe the nvidia panel test again then do the debloat and test again .hope this helps you
Thanks for the advice, I have had mixed results, I first done this on my 3090 desktop and 💯 see an improvement. After the success on the desktop I went on to do my 3080 laptop but the laptop see a substantial decrease in performance. Very bizarre. I will continue messing with the laptop and see if I can work out why 👍
Hey your welcome please let me know your findings on your laptop very interested.
Hey there, how does the laptop run in comparison to your desktop? I prefer a laptop configuration but wonder if I’m giving up loads of performance vs the desktop option? I have the i9 and 3070. Thanks for your help
I had on my computer a total of 10 Nvidia programs. What an eye opener. I am now updating it with the new programs that you recommend. Looking forward to see what I can increase too.
Thanks for posting please let us know your results and your system specs thanks again 👍 😀
@@2020fsers Windows 10 64 Intel core I9-10850 3.6 GHZ 32 GB Ram RTX 3080
@@2020fsers Ok so Here are my Results. Followed the instructions to the T. At highly detailed airports and JFK I get around 23-28 after following the instructions. Flying through Heavy clouds went down to around 19-21 but they were thick! Overall it seems to run smoother even at the low frame rates. When I get up to cruising and the sky is clear I get 45-50 easy. I have all my settings on Ultra.
Ok great thanks for the info 1 thing that will help fps is turn the clouds to high and that will greatly improve fps if you have that set to ultra. Thanks again
I type in ms config, open system settings, click boot and tick the box to boot in safe mode, loads quicker than your route, once in safe mode before doing anything else I go back to the same system settings and un tick boot in safe, then run DDU.
I've recently got a reverb G2, so I'm definitely going to try this, thanks for taking the time to show how to do it.
Hey thanks for the tip 😀 appreciate the comment
On further testing I'm getting about a 10 to 15% FPS increase (I'm continuing testing). I also watched the "BEST Graphics Settings For SIM 9 Update" video and performed the recommended NVIDIA & Sim Graphics Settings. Since I have an I7 processor I did try VSYNC setting off/on...did not seem to make a big difference, but this is the first time I've had anyone of the Graphics Performance videos suggest anything but VSYNC OFF. I've always found that TERRAIN LEVEL OF DETAIL seems to be the parameter that FPS is most sensitive to.
Thanks for the comment glad it worked for you . Always nice when you can tweak out a couple more fps .
11900k OC , 3060ti OC 32gb ram , 2k etc etc... I had 3 nvidia share , 1 web helper , 1 nvidia shadowplay helper , and 5 nvidia container lol i have to say i already had a pretty smooth experience with the sim but i saw your video and i wanted to try your stuff and i have to say you know your stuff buddy ! my sim run soooooooo smooth with the pmdg 737 wow thank you
Your very welcome my friend 😊 thanks for the comment 😀 I'm very happy this helped you .
Did you get rid of shadowplay? Used something instead? Or did you leave it unticked in the process
Just performed this task and it went without a hitch! Excellent tutorial my man!
thank you so much ! i have also done an update video on this as some of the settings have changed if your interested th-cam.com/video/YNGXHgehkeA/w-d-xo.html
Great Job!, very THOROUGH and PROFESSIONAL. Wish I could find someone on here that can run through X-Plane 11 like you have with MSFS 2020. If you know of anyone, pass their sight my way. Thanks. Again, GREAT JOB
Thank you for the kind words. If I find anyone ill let you know 1 person I do like to watch is maverick he's awesome 👌
@@2020fsers Thank you Sir for the quick response. I subscribed to your channel even though I don't fly MSFS 2020. I bought it, and tried it, but was having so much trouble with it, I just finally uninstalled it. after watching some of your detailed videos, I might reinstall it and give it another try. Thanks Again
It really is great and I can help you with whatever you need . Also stop by the Facebook group their you can share pics and videos if you have issues . It's a great community of fellow simmers all willing to help out and no negativity . Unless a sim update lol just kidding 😂
Great info thank you very much!!!
Very welcome
Very welcome
Thank You, Amazing!!. On my RTX3080 with Reverb V2 ULTRA/HIGH setting FPS increased from 23 to 34! When you in the Netherlands I own you a couple of beers!
Hey thanks I really appreciate it 😊 im happy it helped you.
Gotta say after trying so many different things to get my performance up to no avail this is the only thing that's worked for me...fantastic!
Glad it helped you thanks for the comment 😀
Wow...what a game changer. Thank you for sharing !
Great thank you for the comment
I've really been struggling with FPS in major airports (particularly the new Aerosoft Brussels) but after doing this and your other settings guide my FPS is significantly higher. Thank you!
thats fantastic thanks for posting this glad it helped you !
@@2020fsers Honestly mate, I can't believe the difference
I felt the same way it's like a new sim experience.
@@2020fsers totally, I was considering upgrading my 3070 but I don't need to bother now.
Excellent video and very clear again; you are a great communicator. I just have a question: should we not achieve similar result by just uninstalling the "GeForce experience" via the control panel (add/remove programs) ?
So yes you can do that also but the big thing here is the ddu and then just install the nvidia driver choose custom and don't select the GeForce. I like doing it the way I showed only because I'm able to eliminate more things than just the GeForce experience it just gives es me more control that's all. Thanks for the comment
Thank you so much, i now have proper graphics like i see all the time on other peoples stuff, hahaha, 3060 amd ryzen 7 3800x, 32 g ram, HUGE increase in everything!!!!!
Great thanks for the comment
Thank you Sir! Awesome
very welcome thanks for the comment
Great video. I just completed the steps but haven't run msfs yet. I did run 3D mark timespy to see if there was a difference and my graphics score has dropped significantly. Do you know if this is normal after doing the tweak? I'm using a MSI 4090
Thank you so very much. I had 13 nvidias. I am happy now.
Glad this helped you thanks for posting
Thank you for this information. I have the Nvida GeForce RTX-2070 GPU. While in the MSFS2020 window I get 25-35 FPS after following your instructions. I can live with that however every time I switch to another window (like supported MSFS2020 utilities, or the map, etc...the open flight simulator window goes to 15 FPS & stutters until I make it the active window. I didn't have this issue prior to the performance hack other than the lose of flight control inputs when the simulator is not the active window which is still the case. GeForce Game Ready Driver - Driver Version: 516.59 - Release Date: Tue Jun 28, 2022
Thanks for the comment make sure in your nvidia panel settings that the background app fps limit is set to off .
what a game changer in VR, came here thanks to "Flight Simming Guy's World Travel in VR" tutorial, it blows my eyes!!! Thank you so much !!!
Your welcome thanks for the comment
thank you for your excellent explanation, I am normally very skeptical at these claims but I stand corrected! It works!! (even for me ;-)) I have now 40+ fps in fps intensive situations. PS do you support PayPal?
Thanks for the comment glad it helped .. what do you mean support PayPal?
Thank you so much for the AMAZING video! It helped me a lot and I'm sure thousands of other people too. I had a question, do we need to do this after every driver update??
Thank you for the comment 😀 yes you will repeat this when a new driver is released .
Removing the Nvidia junk in my task manager helped so much holy crap. Thank you man so much!!! Do you have to “end task”those Nvidia junk everytime you launch your pc?
thanks for the comment .. you should only have 2 containers now in the task manager if you delete them they will come back they are needed. so after you do the debloat you dont need to worry about the task manager .
I remember doing all those step following your guide and worked amazingly. Sorry I didn't say thanks before. I was wondering if it's still relevant for the 40th anniversary edition? And again, thank you so much. Fly safe.
Hey thank you 😊 yes this is still relevant for su 11 and most likely all updates .
i have 10 nvidia programs running also thanks for this video :) going through it so far hope it works :D
Hey thanks for the comment ... let me know how it goes I also just release a windows setup guide today
@@2020fsers ah wow thanks buddy will have a look :D
Your welcome
Great info thanks for that. But will I still be able to use the gfx overlay method (ALT+F3) if the GeForce Experience is not installed anymore?
No you won't this removes all GeForce experience stuff. So that's a trade off. you would have to make that call after trying this you may feel that is a tradeoff you are willing to make and if not it's, easy just install the driver that you downloaded from nvidia and your all back to normal .
how? You uninstalled it ^^
@@A360JFuxtier You would just run the normal NVidia driver setup (the driver you downloaded from NVidia) instead of following his instructions. When you run it, you'll be asked if you want to install GEForce, and you can do it there. That will overwrite any changes he stepped you through in his video.
Great video, thank you! Do I have to repeat the same process each Nvidia driver update?
thanks for the comment . yes just do a rinse and repeat
I knew the gf experience was a bloat, streamlined installation makes a big difference, thanks!
Your welcome thanks for the comment .
Another appreciative "down under" follower here and a NZ beer or 2 waits if you ever get to visit :-). Your info helped me get my VR FPS from a totally unusable 2-3 to 19 after making changes per your recommendations.
My system specs are:
Windows 11 Home 64
MSI B560 B560M, Pro-E MS 7D-22 Intel U3-E1 - gaming mode selected (whatever that means)
Intel Comet Lake Core I5 10400 CPU @ 2.9GHZ
32GB memory
NVidia GEFORCE GTX 1660 Super GPU, 2047MB, drivers up to date
2 Samsung SSD 860 EVO
HP Reverb G2 VR
OpenXR per your recommended settings.
Task Manager had 6 NVidia entries before Guru3d and NVClean, now shows 2 - I assume this is as expected.
My CPU typically running at less than 50% and GPU up from 65-70% to 98-100% in VR.
In your opinion, does 19 FPS sound about right for my specs or do you feel that my system should be capable of more and if so, I would appreciate any recommendations about where to look.
Thanks very much
Mike
Hey thanks for the comment and happy it helped you.. so are you running you ram on xmp mode in the bios? If not turn that on will make a big change. I also just did a windows optimization guide I know it's for windows 10 but the application at the end of the video is a good application to use for 10 and 11 that will also help. You can also use msi afterburner and overclock your gpu. I also have a video on that as well.
Good work, very well explained
Thank you 😊