Only 49 seconds into the video but I just wanna say I follow a few channels on all things msfs and your channel by far is the best mate, and your by far the most helpful, I hope your channel continues to grow, you deserve it one million percent, thank you for all your tips / hard work and keep it up 👍🏽
@@2020fsers I’ve just followed the paging memory, I have 32gb of ram, I set the numbers you suggested 48000 and 96000 but when I hit enter it says the drive doesn’t have enough space and will grow to the available size space ,, it says space available 59780. I run the c drive on a 120gb ssd is this a problem?
I’ll also add I tried also setting it to no paging file and as soon as I tried loading into an airport in the sim I got a msfs exception breakpoint warning :(
At first I taught with a duration of 31 minutes we have another youtuber who like to hear them self talking, what was I wrong, every second is informative and helps me a lot tuning my system. Thank you for your hard work!! Of course I subscribed to your channel. Edit: Finally a stutter free FS, from the start although FPS was around 60 always had a stutter and micro stutter, even on a fresh win install and only FS running. Never taught it was possible to run FS smooth till today. My GPU is not on a 100pct load anymore but around 80-90 on 4k with a 2080Ti and Ryzen 9 cpu. I got a virus warning on Pegasun (TotalAV), didn't do that tweek. I had Lossless Scaling already installed but FS stutters also on higher frame rates and was bit disappointed of how it work. Now it gives the last smoothness and the frames looks more sharp, amazing :). Blue sky's cheers from the Netherlands!!
Thanks! Here is a little something for your channel. I really appreciate all your help that you are willing to give. I know it takes time for these tutorials that you do. And you always respond back ,So thanks buddy for all your hard work and keep them coming.
@@2020fsers no problem my man wish I could’ve gave you more. Now that I’ve watched your video. I’m going to go look through some settings that I need to mess with I have a 4090 graphics card i9 13900k 32 gb. So which probably don’t need to mess with too many settings. But I do want to check out the hags on and off, not using frame generation. And I will probably try the auto FPS. What is your opinion on that? Are you using it?
Lord of the Settings (LOTS) -- One Video to Rule Them All ‼️ I guess I can delete all the other ones from my TH-cam playlists. Whether I do that or not, this is probably the only video I need to consult about non-VR settings because it comes with incredibly useful time stamps. I've never seen anything quite like it!
This video is insane! So much tweaks i've never heard off. I went from stuttering 42 FPS (Fenix A320/heavy scenery) to 60 FPS (locked) all the time without lossless scaling! Gonna try to see a difference between game mode on/off, was previously turned on. Specs: 7800x3d / 4080 Super / 64gb RAM (6000/Cl 30) Thanks!
Great guide. Only suggestion I would make is on the virtual memory section. In my experience you want the min and max sizes to be the same to keep your page file from resizing and degrading performance.
@@2020fsers im still running with a i-7 10k paired with 4070 super in stock , no over clocking , no need to and , I know I'm not hitting the full power or the card but I'm getting over 60 fps , and I'm impressed, but lately I'm getting crashed with an error saying that it could be the overclock, which I'm not, running hot, which both temp are running below 50C , and this one about the dx12 beta, that should go back to dx 11 , ...all this being happening after the august 2024 driver update Do you have any recommendations, thank you
Interesting! I mainly go for visual pleasure so with the 4090 I render in 6K with TAA and Frame Generation with ultra settings maxed out on a 32-in 144Hz 4K monitor and it's been pretty enjoyable so far. Now in some cities I do have to back it down to 5K.
Thanks for putting these type videos out. I have only been playing MSFS for 6 months but am struggling with ground studders. My computer specs are RTX 4090 and AMD Ryzen 7 7800X3d with 64g of ram. I do play exclusively in VR so that could be my issue. I have a Valve Index headset and use steam VR as my entry point. My studders are mild to moderate. Not sure how to tweak my system but I will follow what you have here and see if I am doing something wrong.
Ok you said for owners for the 40,000 series graphics card and frame generation to turn on hags what if you don’t use frame generation but you have a 4090 graphics card should you still turn hags on or off? Of course you know I am a VR user and only VR lol
Thank you again for combining all your performances enhancements in a such a well presented and informative way. It is much appreciated. So good to have this from a trusted source. Thank you.
After doing this i noticed no performance increase, and sky high CPU temps. Having to go back and undo everything said in this video. I seem to be the outlier here so idk but maybe be careful with some of these.
I am getting all red in the Frame Rate Screen. I have a Asus Z790 Strix-E Wifi II. Intel i7-14000K. An Asus ProArt 4060ti 16gb Graphics Card. 64 Gb Ram. I'm unable to get any green when I spawn in the sim with or without add-ons. I'm wondering if I have a miss-matched system. Is the fact that I have a ProArt graphics card making any difference? I have also followed all the steps. I could use a little help. This channel is great for the information I need to run a smooth sim
Thanks for the comment . Are you using the native refresh rate of the monitor? Are you using vsync ? Are you capping frames? If so please give me details to these questions. I can't offer any suggestions if I don't know what your current settings are the hardware really doesn't matter it's the settings.
Thanks for taking the time putting this together. I can only imagine how much time it takes. WRT debloating the NVIDEA driver. When I update I disable installing GE Force and perform a clean install. I don't use any other driver features such as filters. Do you know if debloating is necessary if I do a clean install?
On a slightly different subject. I use a PiMax Crystal and I leave it powered on all the time. The battery stays charged and the screen does turn off. Do you know or have you heard if this is a good or bad practice?
Hi there! Hoping you can help me out. I'm on iRacing and I follow everything that's applicable to my sim. And it's wonderful, so thank you for that! But I am having an issue with my fuel calculator overlay which I use openkneeboard to put in my headset. I use a web link from my calculator software to pull into openkneeboard. My calculator stops working after a few minutes. Is this due to some setting I may have put on within following your video? My apologies, I'm not very tech savvy, so half the stuff you did in your video that I followed, I'm not even sure what it did other than give me much better performance 😅. Thanks again for all you do!
@@2020fsers it did work fine until I went through this videos settings. I'm also working with openkneeboard. I'm thinking I don't have MS edge running in the background. My fuel calculator doesn't require me to open a browser, but still uses a browser link. Going to tinker a bit to see if MS Edge not running in the background is the cause of this.
I run MSFS from Steam and am unable to choose Microsoft Flight Simulator everywhere you are doing so. MSFS is not a choice for me. Best I can find in "Steam". Should I be choosing Steam in these instances?
Hello, Following all your steps but ran into a problem with Nvidia profile inspector...I have the same version as you but I do not have the True HDR or DLSS options at the top, I start at Compatability...am I missing something?
@@2020fsers Thank you, watched your more in depth video and realised...all good now thank you and keep up the good work, us non IT techies rely on you lol..
I guess the main thing would be to make sure that vsync is off and also check on the mouse check box in the user interface of the lossless scaling app to improve the performance of the pointer
Hey Skip you probably didn't input the xml file into the profile inspector folder . Checkout my more detailed video below in that it will have all the links you need .
Question: With the Service Manager of Pegasun System Utilities, I noticed that when you close the interface, it still runs in the system tray (bottom right of the taskbar). Do you need to keep this running in the system tray in order to do its optimization or can you exit it in the system tray? i.e., do you need to keep this running before launching msfs 2020?
Ahh yeah I should have mentioned that . You can close from system tray . Once you make the changes you are all good to go. Never need to open it again unless you add more app and programs to your pc then run it again to make sure those programs don't add services blindly running in the background
I disagree with the page file size recommendation. You only need the page file if you run out of memory, which would be rare with 32-64GB of RAM so you could potentially be wasting storage space setting such high minimum values.
Thanks for the comment . Like I state at the very beginning do what works for you. I have had people with 32 and 64 gb ram do this method with great results however if you are limited on space then you will need to adjust your settings for your system .
With a 3090 or 4090 with 24Gb Vram (and in my case, 32Gb ddr5 ram) you shouldnt need to muck around with page file size. Because I have lots of room on my SSD drive, I fix my system file size to min/max 24Gb (24000mb) and this seems to work fine. In the past, using gpu's with less Vram, I've always sett the min = amount of Vram and max at that + 1000mb. Like everything, your results may vary, lol!
Very curious! after your instructions simlink doesn´t work anymore with MSFS and FSTL traffic injector freezes the simulator... FPS still low but my PC is 1000 times faster when it is about to restart...
I also use navigraph but I have no issues with simlink and also fsltl and no issues . I'm not sure what could have caused this . Maybe in your startup apps or background apps did you turn off simlink?
@@2020fsers I solved Navigraph and Simlink issues (I stupidly turned off Simlink from background apps), but I am having weird issues with FSTL even before watching your tutorial. My sim lose all fps (down to 8-10) and gets totally frozen sometimes while running FSTL engine (frustrating). Any good tutorial about FSTL traffic injector from your channel?
@@2020fsers I got another question to you: Do you know what to do if my simulator gets frozen while running and I open google Chrome at the same time? It happens the same issue like when using FSTL Traffic Injector. Freezing!
@@2020fsers thanks for the fast reply. i use the Pimax Crystal and i certainly would like it if you made a similar video for those who use VR exclusively in MSFS. I am sure most would appreciate that also.
@mikechenard9911 great headset check the description for my ultimate vr guide. I have also done pimax crystal specific videos if you are interested in that as well here is 1 of them and the rest in the description of that video th-cam.com/video/l4gwtGZdK9g/w-d-xo.html
Yeah some anti-virus apps will flag it not all . I've already talked to the developer about it. Norton 360 and another 1 he said flags it . The reason is because this app has the capability to change registry . That's why I only suggest what I go over .
@2020fsers, When I try to put this, intoGame Mode, and then to graphic settings, I follow the path of This PC> Local Disk (C) >Users > Elite-R5 > AppData > Roaming > Microsoft Flight Simulator, and click (Desktop App) and then nothing, it will not do anything, how can I get it, to to show where you had the Microsoft Flight Simulator, and under it high performance?
hello my brother I am really wanting to try dlss frame generation and DLSS tweak mod but don't know how to install and set up for my 4090 and pimax crystal i heard that DLSS and DLAAA with tweak mod is the holy grail for graphics and performance in vr . i was hoping you have a video on that or if you can consider doing a video. i know it would be a great tutorial and the best one on youtube. so any info or thoughts would be appreciated.
hi. i have a big problem with clouds if you look my videos (please watch at least 1080p) there are many shimmering pixel on clouds... i try many thing to solve but.. nothing change itry to play dx 11 closing FG still there ... i also try to change film grain in user.cfg ...All my driver and app up to date and there is nothing in the community th-cam.com/video/y1Mo0sddeUs/w-d-xo.html my spec: 7800x3d, 2*16gb ddr5 6000 cl36, RTX 4070 ti super game settings: 2k ultra TAA , FG on DX12B
@2020fsers, WHERE EXACTLY, does it show a link, for the /Online/Clean-Image/RestoreHealth, mentioned in timestamp 2:12, I could not find the exact wording of this anywhere, please help, Thanks?
Only 49 seconds into the video but I just wanna say I follow a few channels on all things msfs and your channel by far is the best mate, and your by far the most helpful, I hope your channel continues to grow, you deserve it one million percent, thank you for all your tips / hard work and keep it up 👍🏽
Thank you so much . Glad these videos help out .
@@2020fsers I’ve just followed the paging memory, I have 32gb of ram, I set the numbers you suggested 48000 and 96000 but when I hit enter it says the drive doesn’t have enough space and will grow to the available size space ,, it says space available 59780. I run the c drive on a 120gb ssd is this a problem?
I’ll also add I tried also setting it to no paging file and as soon as I tried loading into an airport in the sim I got a msfs exception breakpoint warning :(
@Aza35617 ok so you just need to adjust for your system so in your case set min and Max to the same size 48000
At first I taught with a duration of 31 minutes we have another youtuber who like to hear them self talking, what was I wrong, every second is informative and helps me a lot tuning my system. Thank you for your hard work!! Of course I subscribed to your channel.
Edit: Finally a stutter free FS, from the start although FPS was around 60 always had a stutter and micro stutter, even on a fresh win install and only FS running.
Never taught it was possible to run FS smooth till today. My GPU is not on a 100pct load anymore but around 80-90 on 4k with a 2080Ti and Ryzen 9 cpu.
I got a virus warning on Pegasun (TotalAV), didn't do that tweek.
I had Lossless Scaling already installed but FS stutters also on higher frame rates and was bit disappointed of how it work.
Now it gives the last smoothness and the frames looks more sharp, amazing :).
Blue sky's cheers from the Netherlands!!
Thanks for the comment ... happy it helped you . And thanks for the sub
Thanks! Here is a little something for your channel. I really appreciate all your help that you are willing to give. I know it takes time for these tutorials that you do. And you always respond back ,So thanks buddy for all your hard work and keep them coming.
Hey thanks so much Richard 😀 🙏 I really appreciate the donation. Glad I can help .
@@2020fsers no problem my man wish I could’ve gave you more. Now that I’ve watched your video. I’m going to go look through some settings that I need to mess with I have a 4090 graphics card i9 13900k 32 gb. So which probably don’t need to mess with too many settings. But I do want to check out the hags on and off, not using frame generation. And I will probably try the auto FPS. What is your opinion on that? Are you using it?
@richardPalmisano I don't use auto fps but the one I prefer is the dynamic lod tool
@@2020fsers cool is that in the video or description cant remember lol
Check the description for the video on auto fps and I that video will be the links
These tips have greatly improved my sim experience. Thank you very much sir!
Your welcome thanks for the comment .
Thank you I recommend the lossless scaling tool is the best option!
It is a great tool
Lord of the Settings (LOTS) -- One Video to Rule Them All ‼️
I guess I can delete all the other ones from my TH-cam playlists. Whether I do that or not, this is probably the only video I need to consult about non-VR settings because it comes with incredibly useful time stamps. I've never seen anything quite like it!
Thanks buddy glad it helped 😀
This video is insane! So much tweaks i've never heard off.
I went from stuttering 42 FPS (Fenix A320/heavy scenery) to 60 FPS (locked) all the time without lossless scaling!
Gonna try to see a difference between game mode on/off, was previously turned on.
Specs:
7800x3d / 4080 Super / 64gb RAM (6000/Cl 30)
Thanks!
Great results thanks for the comment
I implemented these settings on my PC, and it has been fantastic! Solid 60 FPS or more in the Kodiak on my old Dell T3600. Thank you!
That's great thanks for the comment
Greatings to Mr Fazekas from Hungary
Most definitive guide I've seen! Thanks for all your work! ❤
your welcome thanks for the comment !
Great guide. Only suggestion I would make is on the virtual memory section. In my experience you want the min and max sizes to be the same to keep your page file from resizing and degrading performance.
Thanks for the info . Yeah if something works for you stick with it . I haven't had any issues this way but I only play msfs so that may be why
Now looking at my screen wow, this is awesome, thank you again
your welcome thanks for the comment
@@2020fsers im still running with a i-7 10k paired with 4070 super in stock , no over clocking , no need to and , I know I'm not hitting the full power or the card but I'm getting over 60 fps , and I'm impressed, but lately I'm getting crashed with an error saying that it could be the overclock, which I'm not, running hot, which both temp are running below 50C , and this one about the dx12 beta, that should go back to dx 11 , ...all this being happening after the august 2024 driver update
Do you have any recommendations, thank you
@salmopr did you update your driver if so roll back or try a studio driver .
Also dx11 may be better
@@2020fsers I cleaned up the cashed folder and came back to neutral, making over 60fps now
Interesting! I mainly go for visual pleasure so with the 4090 I render in 6K with TAA and Frame Generation with ultra settings maxed out on a 32-in 144Hz 4K monitor and it's been pretty enjoyable so far. Now in some cities I do have to back it down to 5K.
What about “Optimizations for windowed games” ? Should I leave it ON or OFF? I play only in VR and use a TV as a monitor lol
i would leave it as default
Thank you, great video!
Your welcome thanks for the comment
Thanks for putting these type videos out. I have only been playing MSFS for 6 months but am struggling with ground studders. My computer specs are RTX 4090 and AMD Ryzen 7 7800X3d with 64g of ram. I do play exclusively in VR so that could be my issue. I have a Valve Index headset and use steam VR as my entry point. My studders are mild to moderate. Not sure how to tweak my system but I will follow what you have here and see if I am doing something wrong.
Your spec should give good results especially In a valve index . Check out some of the tips that may help.you
Hello there, is there also an optimization for AMD Adrenalin and rx7900 xtx ? Help needed there, thanks for the great video by the way!
Hey thanks . I'm not sure of amd I can only show what I have sorry
Ok you said for owners for the 40,000 series graphics card and frame generation to turn on hags what if you don’t use frame generation but you have a 4090 graphics card should you still turn hags on or off? Of course you know I am a VR user and only VR lol
I would probably keep it off then
@@2020fsersok oh and I’m using a studio driver instead of game driver now I find it is more stable so I have the latest installed. Thanks again.
Yeah that's what I use
Thank you again for combining all your performances enhancements in a such a well presented and informative way. It is much appreciated. So good to have this from a trusted source. Thank you.
Your welcome and thanks for the comment
Thanks for not being an 'infomercial' channel. I am sick of being sold shit while the channel pretends to review shit.
Yeah that's not me lol if I can't help I don't post. Thanks for the comment
After doing this i noticed no performance increase, and sky high CPU temps. Having to go back and undo everything said in this video. I seem to be the outlier here so idk but maybe be careful with some of these.
I am in for an update to my 4090. Do we still debloat? I am trying to go to dx12 with dx swapper, do I still need to set AA to x16? And clamp?
I always de bloat my driver . Use the anti-aliasing setting that works best for you I use the one in the control panel
Are you using dx12 I’m thinking of giving DLSS-DLAA a try I have the 4090 and want to see if I can get the best sim experience
@MrEgegaard I use dx11 it works best for me
@@2020fserswhat is it that dx12 gives? I didn’t think DLSS gave me any good.
DX12 with TAA and Frame gen. for now..
I fly vr so frame gen is no good for me .
I am getting all red in the Frame Rate Screen. I have a Asus Z790 Strix-E Wifi II. Intel i7-14000K. An Asus ProArt 4060ti 16gb Graphics Card. 64 Gb Ram. I'm unable to get any green when I spawn in the sim with or without add-ons. I'm wondering if I have a miss-matched system. Is the fact that I have a ProArt graphics card making any difference? I have also followed all the steps. I could use a little help. This channel is great for the information I need to run a smooth sim
Thanks for the comment . Are you using the native refresh rate of the monitor? Are you using vsync ? Are you capping frames? If so please give me details to these questions. I can't offer any suggestions if I don't know what your current settings are the hardware really doesn't matter it's the settings.
Regarding Nvidia Inspector: I use DLSS, but don't see it in the inspector options
Check out the more in-depth video that I've done on the inspector you need to insert an XML file the link is in the description for the other video
Thanks for taking the time putting this together. I can only imagine how much time it takes. WRT debloating the NVIDEA driver. When I update I disable installing GE Force and perform a clean install. I don't use any other driver features such as filters. Do you know if debloating is necessary if I do a clean install?
Ok if you disable GeForce when you update then the debloat won't help all that much .
Thanks for the comment
Thanks. Have a great weekend.
Cheers,
Steve
On a slightly different subject. I use a PiMax Crystal and I leave it powered on all the time. The battery stays charged and the screen does turn off. Do you know or have you heard if this is a good or bad practice?
@steveflynn9279 you also
Hi there! Hoping you can help me out. I'm on iRacing and I follow everything that's applicable to my sim. And it's wonderful, so thank you for that! But I am having an issue with my fuel calculator overlay which I use openkneeboard to put in my headset. I use a web link from my calculator software to pull into openkneeboard. My calculator stops working after a few minutes. Is this due to some setting I may have put on within following your video? My apologies, I'm not very tech savvy, so half the stuff you did in your video that I followed, I'm not even sure what it did other than give me much better performance 😅. Thanks again for all you do!
Thanks for the comment . I doubt the issue is from these settings . Did it work ok before you did anything?
If so you may need to backtrack and see what caused it
@@2020fsers it did work fine until I went through this videos settings. I'm also working with openkneeboard. I'm thinking I don't have MS edge running in the background. My fuel calculator doesn't require me to open a browser, but still uses a browser link. Going to tinker a bit to see if MS Edge not running in the background is the cause of this.
I run MSFS from Steam and am unable to choose Microsoft Flight Simulator everywhere you are doing so. MSFS is not a choice for me. Best I can find in "Steam". Should I be choosing Steam in these instances?
Yes you can do that
It seems the last few updates have started causing stutters in my system that I have not seen before.
make sure to clear your shader cache and if you use rolling cache clear that as well . this may help that issue
Hello, Following all your steps but ran into a problem with Nvidia profile inspector...I have the same version as you but I do not have the True HDR or DLSS options at the top, I start at Compatability...am I missing something?
Yes you are missing the xml file that I put in the folder. Check out the more detailed video in the description for the links.
@@2020fsers Thank you, watched your more in depth video and realised...all good now thank you and keep up the good work, us non IT techies rely on you lol..
My lossless scaling for me is a bit laggy with the mouse and I also get not a fluent performance with it.
Any settings/tips?
I guess the main thing would be to make sure that vsync is off and also check on the mouse check box in the user interface of the lossless scaling app to improve the performance of the pointer
Regardings HAGS on or off on 4000 series Nvidia.....
This onlyl applies if you are running DirectX12 right? I dont run it as it get screen popping.
Yes you are correct
I cannot find the dlss section on my Inspector settings. Any thoughts? Nice video as usual. Skip
Hey Skip you probably didn't input the xml file into the profile inspector folder . Checkout my more detailed video below in that it will have all the links you need .
@@2020fsers Thank you.
Question: With the Service Manager of Pegasun System Utilities, I noticed that when you close the interface, it still runs in the system tray (bottom right of the taskbar). Do you need to keep this running in the system tray in order to do its optimization or can you exit it in the system tray? i.e., do you need to keep this running before launching msfs 2020?
Ahh yeah I should have mentioned that . You can close from system tray . Once you make the changes you are all good to go. Never need to open it again unless you add more app and programs to your pc then run it again to make sure those programs don't add services blindly running in the background
@@2020fsers Thank you!
Pegasun website does not load. Are they still in business?
Site must be down at the moment
Is it just for Nvidia cards or does this help amd users?
Amd users as well except the nvidia panel settings .
I disagree with the page file size recommendation. You only need the page file if you run out of memory, which would be rare with 32-64GB of RAM so you could potentially be wasting storage space setting such high minimum values.
Thanks for the comment . Like I state at the very beginning do what works for you. I have had people with 32 and 64 gb ram do this method with great results however if you are limited on space then you will need to adjust your settings for your system .
With a 3090 or 4090 with 24Gb Vram (and in my case, 32Gb ddr5 ram) you shouldnt need to muck around with page file size. Because I have lots of room on my SSD drive, I fix my system file size to min/max 24Gb (24000mb) and this seems to work fine. In the past, using gpu's with less Vram, I've always sett the min = amount of Vram and max at that + 1000mb. Like everything, your results may vary, lol!
@tomc1380 yeah every system is different some people need to adjust this and other don't.
11:43 - it works with Edge also.
Ok awesome great info thanks 😊
Very curious! after your instructions simlink doesn´t work anymore with MSFS and FSTL traffic injector freezes the simulator... FPS still low but my PC is 1000 times faster when it is about to restart...
I also use navigraph but I have no issues with simlink and also fsltl and no issues . I'm not sure what could have caused this . Maybe in your startup apps or background apps did you turn off simlink?
It's hard for me to help diagnose when I'm not sure what all you changed
@@2020fsers I solved Navigraph and Simlink issues (I stupidly turned off Simlink from background apps), but I am having weird issues with FSTL even before watching your tutorial. My sim lose all fps (down to 8-10) and gets totally frozen sometimes while running FSTL engine (frustrating). Any good tutorial about FSTL traffic injector from your channel?
@@2020fsers I got another question to you: Do you know what to do if my simulator gets frozen while running and I open google Chrome at the same time? It happens the same issue like when using FSTL Traffic Injector. Freezing!
I don't have an fsltl tutorial but I would scale down all the aircraft . The default setting are to high imo.
Hey how will this work with an rtx 2070, core i9-9900k and 16gb ram
Should work just fine
@@2020fsers ahh okay let me try it out then I'll let you know how it goes
My Windows version is not really giving me the option to change the advanced power settings… Windows 11 Here
Ok you may need to skip that part then
Background apps setting is no longer available in windows 11. Any suggestions?
I guess just skip that part
🔥🔥🔥🔥🔥
Thank you 😊
does the Lossless scaling application work in VR?
No it does not
@@2020fsers thanks for the fast reply. i use the Pimax Crystal and i certainly would like it if you made a similar video for those who use VR exclusively in MSFS. I am sure most would appreciate that also.
@mikechenard9911 great headset check the description for my ultimate vr guide. I have also done pimax crystal specific videos if you are interested in that as well here is 1 of them and the rest in the description of that video
th-cam.com/video/l4gwtGZdK9g/w-d-xo.html
The cleanup image option is unknown when i try to run the Dism
For windows 11 it needs a different path i figured out.
Ok cool glad you got it
🔥🔥🔥
Thank you !
Hello, I've tried to download the Pegasun software but the download starts but then fails, anyone else have an issue?
Try the installer download and see if that is the same
@@2020fsers Still the same. I can download other files from different sites, very strange
@daveeastwood3000 possibly turn off any anti-virus or firewall
@@2020fsers NOD32 is finding an unwanted application so I'll leave it for now. Thanks for the help though
Yeah some anti-virus apps will flag it not all . I've already talked to the developer about it. Norton 360 and another 1 he said flags it . The reason is because this app has the capability to change registry . That's why I only suggest what I go over .
@2020fsers, When I try to put this, intoGame Mode, and then to graphic settings, I follow the path of This PC> Local Disk (C) >Users > Elite-R5 > AppData > Roaming > Microsoft Flight Simulator, and click (Desktop App) and then nothing, it will not do anything, how can I get it, to to show where you had the Microsoft Flight Simulator, and under it high performance?
I think the exe is in the Xbox folder now
@@2020fsers I do not have X-Box, and would never buy that toy, I have the Steam version, where is it ,? In the Steam folder, Thanks
hello my brother I am really wanting to try dlss frame generation and DLSS tweak mod but don't know how to install and set up for my 4090 and pimax crystal i heard that DLSS and DLAAA with tweak mod is the holy grail for graphics and performance in vr . i was hoping you have a video on that or if you can consider doing a video. i know it would be a great tutorial and the best one on youtube. so any info or thoughts would be appreciated.
I don't prefer the dlss tweaks mod lots of bits and bobs to work through. I use the nvidia profile inspector that is very easy .
th-cam.com/video/E_FRjo7aGgE/w-d-xo.html
In the profile I spector set your preset to e . And the that's it. Use the dlss dlaa option in the sim
I use dlss quality when I fly vr with preset e .
@@2020fsers ok so in the sim do i turn frame generation off and are you using dx12 and i have dlss swapper installed do i need that ? thanks buddy
You had 245gb of storage available and used 192 on the page file? Not gonna do that, lol.
I agree only do that if you have the space you will need to adjust for your system 😉
This is much different for Windows 11 and these instructions cannot be followed.
I'm sure most of these settings are available in windows 11 however you may need to go through a different path.
screw up all my secnery even after system restore☹
What do you by that. Can you be more specific. Nothing I went over in this video should have any impact on your downloaded scenery .
@@2020fsers For some reason something changed my add on linker setting. found out what it was and fine now
Ok glad you got it sorted
hi. i have a big problem with clouds if you look my videos (please watch at least 1080p) there are many shimmering pixel on clouds... i try many thing to solve but.. nothing change itry to play dx 11 closing FG still there ... i also try to change film grain in user.cfg ...All my driver and app up to date and there is nothing in the community
th-cam.com/video/y1Mo0sddeUs/w-d-xo.html
my spec:
7800x3d, 2*16gb ddr5 6000 cl36, RTX 4070 ti super
game settings: 2k ultra TAA , FG on DX12B
Some of this is snake oil. E.g, the OpenGL settings do absolutely nothing for MSFS.
We manufacture the stuff right out back lol
This is DUMB!!!! Absolutely STUPID to think you have to do any of this to make MSFS even half decent. SHAME on Microsoft! Shame on them!
HOWEVER - THAN K you man for investing the time into this! I know it's extremely helpful, and please - I'm not knocking you AT ALL! Not at all!
Your welcome no offense taken ..
@2020fsers, WHERE EXACTLY, does it show a link, for the /Online/Clean-Image/RestoreHealth, mentioned in timestamp 2:12, I could not find the exact wording of this anywhere, please help, Thanks?
There is no link its a copy and paste section in the description
@@2020fsers Thanks, it worked, great, just did not see, the ONE link, at the top