ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How to diagnose electrical faults with ease using the Power Probe!
ฝัง
- เผยแพร่เมื่อ 24 ต.ค. 2016
- New Electrical Systems video:
PowerProbe Tool Link: amzn.to/3aFTHKP
We had a student with a long-term problem of dash lights that quit working on their Suzuki. I demonstrate how to use the Power Probe to diagnose this within minutes.
Do you struggle with electrical diagnosis? Wanting to be a rock-star with electrical? Let me train you!
Here is a solid flow chart for fast accurate diagnosis. Tip 1-4 HAS to be is good integrity ALWAYS. As I worked on my personal craftsmanship when performing electrical repairs, I've found that it's just good practice to "maintain" these items 1-4 regardless. I previously would work backwards on this list to diagnose problems the fastest.
I found that building steps 1-4 into muscle memory not only made me consistent when troubleshooting electrical problems, but improved the quality of my work.
Here is my list. Repair or maintenance as you go. Think: clean connections and dielectric grease connections!
Electrical diagnosis Checklist:
1. Battery testing (load tested!)
2. Ground Verification
3. Locate Wire Diagram (This is a real time saver)
4. Fuse Inspection
5. Test for Power to component connector (vehicle side of harness)
6. Test for component Ground
7. Isolate component from vehicle and bench test with the Power Probe.
Feel free to share if you like it or know someone this lesson will benefit.
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
Click the links to playlists: (entire list link is the last one)
Harley EVO: • "How To": Evolution St...
Harley Twin Cam: • "How To": Twin Cam Har...
4-Stroke Engines: • "How To": 4-Stroke-Eng...
2-Stroke Engines: • "How To": 2 Stroke-Eng...
"Every Mechanic Should Know This Training": • "Every Mechanic Should...
Transmission: • "How To": Transmission...
Wheels, tires, brakes: • "How To": Tires / Whee...
Electrical: • "How To": Electrical S...
Fuel, air, intake: • "How To": Fuel / Intak...
Suspension: • "How To": Suspension S...
All playlists by type:
/ conleybuilt
I wish I had a teacher like you . Great tutorials and easy to understand.
Great news for you! I have solutions for you and will point you in the right direction. Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you.
Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W:
Email Answer Service-Click how2wrench.com/product/email-support/
Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/
DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/
Dealership Training Services-Click how2wrench.com/product-category/dealer-services/
MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/
Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/
On-site Training Services-Click how2wrench.com/product/on-site-training/
Tech Line Services-Click how2wrench.com/product/tech-line-minutes/
Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist!
www.How2Wrench.com
Hey that was awesome. Simple enough for even me to understand. I appreciate all the background explanations that a lot of other channels assume you already know.
Awesome, thank you! Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel:
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got myself a PP III just recently....now learning as much as I can regards circuit testing and electricktrickery.....one of several tools from simple test lights upwards. Nice video....👍🏻
"ELECTRICKTRICKERY" WOW !!!!!!!!!! , I GUESS YOU ARE FIRST TO USE COIN THIS TERM , THAT WORD SAYS IT ALL MY BROTHER ! LOL !!! :)
Great tutorial!!!!! I watch a lot of how tos even if I know how the tool or product works. I look for the most informative teaching style that appeals to me. Then I follow the person on the subjects I need to learn about. Great teaching on this power probe. Not just talk about what it can do but a case study as well. Thank you
Glad it was helpful! Thank you for commenting. Could you spare $2 and support us with even more benefits? Smash the subscribe button and bell! Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Tutorial outstanding thank you for sharing with us. God bless you and all your family around you.
From Nick Ayivor from London England UK 🇬🇧
Glad it helped. We will let Shane know!
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "TH-cam Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Great video , almost understand. Will watch again until I get it. Just ordered one to find out why one of my headlight is dimmer than the other.
Shane has a entire playlist for the power probe and hundreds of electrical videos. One on one service too!
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "TH-cam Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
yes I must have to buy a power probe and also it is good how he shows how to use it properly
Thank you! Please share on your social media! Make sure to subscribe and click the notifications button for all future videos! Also, my playlists are broken down pretty well. The most popular one being: "Every Mechanic Should Know This"
th-cam.com/play/PLAtBOuPaEyt_uMyVlK1tsBVnSYW1Q0vCK.html
Feel free to make any suggestions or reach out to me for personal mentorship,
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
. It's one of the best motorcycle blogs on TH-cam and I watch you canreally learn a lot of Shane how he is says it or how it works on all types of motorbikes
AWESOME FOR FINDING OPENS ! , GREAT CHANNEL MY BRO !
Much appreciated. Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists!
Even more training and deep dives if ever needed…
Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
howdy Shane more cool ideas .
ps: don't forget the simple test lamp.
Pretty cool demo.
Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: th-cam.com/users/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
how do you know the wire has integrity if it is not loaded, it just appears to show there is voltage (potential) present? Once you load it there then yes integrity is present but just touching it with the probe and going by lights on it, not sure about that one...
Very true but you must start somewhere when training techs and I have other videos/lessons demonstrating loaded tests. As a creator, one cannot simply put everything in a 4 min video...There's an entire playlist with over 50 videos on the many required skills sets needed for electrical work. You can find it here: th-cam.com/play/PLAtBOuPaEyt_y8Ua2r49WYf0nLzYXT9eA.html
Thank you for sharing…below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education!
Keep Wrenching,
Shane Conley
Shirt/Stickers link: how2wrench.com/product-category/specials/
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
TH-cam:
th-cam.com/users/ShaneConleyhow2wrench
Instagram:
instagram.com/how2wrench/
Linkedin:
www.linkedin.com/in/shane-conley-how2wrench/
Facebook:
facebook.com/MechanicsLearningSharingPage/
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Amazon Tools:
www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp
nice video..well explained and demo'd...show a video on the same with automotive examples using the power probe model ect3000b.
Thanks for commenting and adding value to our community!
Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: th-cam.com/users/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
So sick I just learned this all recently so I was kinda saying what u were about to say in advance lol but like to see exactly what I learned in real life situations so thank you for that very easy and understandable like how I learned !!
Glad I could help. Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel:
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Only thing I don't like about the Power Probe is it keeps growing larger with each new model and that can make it difficult to use in tight quarters.
Did you see Snap-On's new one?! That thing is a bulky, awkward hunk, made by PP for Snap-On. My dealer was trying hard to sell it. Nope!
Agreed, stuff should be getting smaller not larger.
the problem with power probes is they dont load the circuit during closes circuit tests like in the begging. it doesn't show voltage drops. the load pro is a much better diagnostic tool for voltage drop testing which would eliminate everything from the connector back, etc. power probe has it uses like every tool. however, I dont think it's great for circuit testing. very useful for applying powers and ground though.
Thank you! Please share on your social media! Make sure to subscribe and click the notifications button for all future videos! Also, my playlists are broken down pretty well. The most popular one being: "Every Mechanic Should Know This"
th-cam.com/play/PLAtBOuPaEyt_uMyVlK1tsBVnSYW1Q0vCK.html
Feel free to make any suggestions or reach out to me for personal mentorship,
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
Pros and cons.
Totally agree _ just looking at lights on the power probe without the circuit loaded proves nothing really... load it and you may see that voltage drop like a stone.
Absolutely correct , I agreed to Stephen Sir
Stephen Boykin my new Power Probe 4 has voltage drop testing abilities. It is the newer version of the Power Probe other new features as well..
Thank you
You're welcome. 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
NICE!!!
👍 Thank you for taking the time to comment! Hit that subscribe button please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
What happens if you accidentally push power onto ground using that thing?
Pops the tool circuit breaker. Hopefully (and most likely but I wouldn't due on purpose) before hurting anything...and yes I've done it...😆I've got a playlist on this tool: th-cam.com/play/PLAtBOuPaEyt-vGcRPmkFvHQOZMhTT2p_M.html
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Can I use this to test my blend door actuator?
You can use this to test anything electrically powered from the voltage ranges specified 12-24vdc. As I do you have any idea what your working on. Here is the link to specs. Keep in mind there are newer models with even more features.
amzn.to/3pLbdoI
Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel:
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Some Honda dash components run on 5v dc ...
Yep...cx and gl honda coolant temp guages come to mind...We sure love you taking the time to comment. Are you coming to the next live session?
The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Want to help us back? Please subscribe and give us a high 5 here: www.paypal.me/how2wrench
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
Dangerous test .. Dash on a Honda Goldwing is 5V
Thanks for commenting and adding value to our community! Yes for someone NOT using a service manual first to verify. Assuming all circuits are 12 v would be a mistake for sure right? The tools states the voltage it supplies or tests.
Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: th-cam.com/users/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
*Power Probe III
couldn't this been done faster without all the BS with the load pro?
What is all the "bs"?