I asked dealer if I could buy the clips when my Jeep was in for service, he told me the fenders were welding on and best let them do it. Not going to say the companys name, but they are the only Dodge Jeep Dealer up 35 North in San Antonio. I knew he was lying. Thanks for video. I have been to three of the four jeep dealers here and they have all lied to me about one thing or the other. Careful if you own a jeep in San Antonio.
Jeep en France IDEM🤥, ils ne savent pas travailler proprement sur Jeep, juste bon pour les révisions et encaisser l'argent, il faut trouver un bon réparateur de 4x4 près de chez soi, les garages Jeep sont nul...😎
Great and concise vid. My Aussie JK front right fender is squeaking like crazy at highway speeds, and once my new clips come in this vid will help a lot. Cheers.
Is there a easy way removing the clips without breaking the clips because I'm just gonna remove them to clean between the fender and flares and to spray them to look fresh and new
Can you swap stock plastic flares to stock jk metal flares? I’m looking to buy a wrangler that has nasty plastic & I like the painted metal better. Thank you
i just hit a deer and it broke my front right flare on my 2011 wrangler. how much do you think it will cost to get it repair? it is still intact and drives fine, it just took a chunk out of the front of it
Great video. I removed it as the flare broke and any video or instructions how to put it back ? Does the inner liner or the crown brace needs to be installed first ?
I pulled the fender like in the video, broke all the clips that were holding it in. Luckily the fender didn’t break anything. What do you expect when the vehicle is 5+ years and been through some trails lol
+Dean Fantastic It is a "Christmas Tree" Clip Removal Tool! We do recommend covering it with tape so that it will not scratch your vehicle while using it!
The stock fender is all one piece so I'm not sure you'd be able to use the factory fender with an aftermarket liner. If you are going aftermarket for the liner then I would recommend an aftermarket fender flare as well.
Great question Abbi! * 3.25" - used on all SE, X (except those listed under 4.25"), and Sport models * 4.25" - used on all Sahara, Rubicon, and Special Edition models that have painted or body colored flares
Breyshanna F: Sadly while those fender flares are cool, they probably will not fit. We would be happy to find you something similar for your Jeep Liberty Renegade. Please visit our sister website at www.realtruck.com. You can preview the fender flares we offer for your vehicle. Also, you can call our Sales Team at 1-877-216-5446 between Monday to Saturday: 8am - 11pm EST and Sunday: 9am - 10pm EST. Our Sales Specialist will be happy to assist you in finding an awesome new set of fender flares for your vehicle.
I asked dealer if I could buy the clips when my Jeep was in for service, he told me the fenders were welding on and best let them do it. Not going to say the companys name, but they are the only Dodge Jeep Dealer up 35 North in San Antonio. I knew he was lying. Thanks for video. I have been to three of the four jeep dealers here and they have all lied to me about one thing or the other. Careful if you own a jeep in San Antonio.
Jeep en France IDEM🤥, ils ne savent pas travailler proprement sur Jeep, juste bon pour les révisions et encaisser l'argent, il faut trouver un bon réparateur de 4x4 près de chez soi, les garages Jeep sont nul...😎
They all lie! Thanks.
How does one weld on plastic fenders on a jeep to the metal body??!!! 🤣🤣🤣
Outstanding video man thanks, short, thorough, and right to the point.
Great job ! Never seen a video replacing an old flair to a new one. That will be nice too. thanks.
Thanks for the comment! We appreciate it.
Is there a way to remove the (top) burnt gray part of the front fenders without having to take the inner fender off?
you guys rock! Putting Crawler Conceptz fenders on this weekend and your videos are going to save me tons of time.
Great and concise vid. My Aussie JK front right fender is squeaking like crazy at highway speeds, and once my new clips come in this vid will help a lot. Cheers.
+SickocrowAU Thanks for the feedback!
where do I buy the push clamps for the fender that you broke in the video?
Is there a easy way removing the clips without breaking the clips because I'm just gonna remove them to clean between the fender and flares and to spray them to look fresh and new
Is that support bracket welded or bolted on to the vehicle? I've got different Fender flares to put on this weekend.
Thanks for the video , do you think that I have the need to remove the tires on a 4 inch lifted Jeep ??
No. I think he was probably doing several videos and the tire was already off.
Can you swap stock plastic flares to stock jk metal flares? I’m looking to buy a wrangler that has nasty plastic & I like the painted metal better. Thank you
its still painted plastic
i just hit a deer and it broke my front right flare on my 2011 wrangler. how much do you think it will cost to get it repair? it is still intact and drives fine, it just took a chunk out of the front of it
Are the 10mm factory bolts M6-1.0 20mm bolts? All my factory bolts are rusted, probably need to buy new bolts. TY.
Nice video. I ripped my factory fender off yesterday while wheeling. Need to do some repairs. Thanks.
Great video. I removed it as the flare broke and any video or instructions how to put it back ? Does the inner liner or the crown brace needs to be installed first ?
What were the lift points / placement you were using to lift that jeep.
Great, easy video. Thanks for creating. I’ll use this as a guide when I remove mine!
Nice job! straight forward and to the point! I appreciate that!
Thanks for making it short 👍 10/10
Thanks for the great info, my project today on a 07 JK.
I pulled the fender like in the video, broke all the clips that were holding it in. Luckily the fender didn’t break anything. What do you expect when the vehicle is 5+ years and been through some trails lol
how do we deal with the 2nd wire on the front fender flare? you completely just avoided talking about it.
Jeffery,
You can give us a call and we can help with the installation. Our number is 352-414-7643.
Very helpful! Thanks for the step by step.
so how do you get the metal mounting bracket off
is the fender all one piece or can u remove it in 2 sections? ie the fender and the inner skirt
+adam ant It is all one piece. Thanks for the question!
Havoc Offroad thanks for the answer
What's that tool you're using?
Great Question! We are using the Equalizer Clip Removal Tool - TPE657
Havoc Offroad Nice. I need to get me one of those! Thanks for the reply.
Will removing the flares let me tackle more intense terrain without slashing the tyres on the sheet metal? cheers (my car is in another state lol)
That clipping pulling tool looks awesome. Is that bought or made yourself?
+Dean Fantastic It is a "Christmas Tree" Clip Removal Tool! We do recommend covering it with tape so that it will not scratch your vehicle while using it!
Cheers
Can you remove just the inner liner and replace it with an aftermarket liner with the factory fender flare?
The stock fender is all one piece so I'm not sure you'd be able to use the factory fender with an aftermarket liner. If you are going aftermarket for the liner then I would recommend an aftermarket fender flare as well.
Where you guys are located
What's that tool called that you used for the plastic clips and plastic trees?
Christmas tree clip remover
Those pop rivets that have the fins that make them look like trees are called pop rivets and not trees!
What's the width of the stock fender flares?
Great question Abbi!
* 3.25" - used on all SE, X (except those listed under 4.25"), and Sport models
* 4.25" - used on all Sahara, Rubicon, and Special Edition models that have painted or body colored flares
yay I don't have to worry on "how to"
Do you think i can put those fenders on a jeep liberty renegade ? I love the look of the fenders
Breyshanna F: Sadly while those fender flares are cool, they probably will not fit. We would be happy to find you something similar for your Jeep Liberty Renegade. Please visit our sister website at www.realtruck.com. You can preview the fender flares we offer for your vehicle. Also, you can call our Sales Team at 1-877-216-5446 between Monday to Saturday: 8am - 11pm EST and Sunday: 9am - 10pm EST. Our Sales Specialist will be happy to assist you in finding an awesome new set of fender flares for your vehicle.
It works ! Tku
Thanks. Great info.
Thank you!!!!
Thanks man!
I feel bad for the woner of this jeep.
Good instructions, but terrible video quality. Next time please use proper lighting and a lighter colored vehicle.
Cette vidéo est nul, on ne voit rien...👨🏻🦯