You the only guy on yt family who explain the tig welding pipe nice and soft..the visuals are clear .you don't rush🎉❤ thanks nan All the way from South Africa 🇿🇦🇿🇦🇿🇦📍📍
Amazing tutorial my man! I really hope young welders appreciate free knowledge and tips that are getting from you here, as you would need to pay big bucks for this amount of welding tips! Incredible and extremely educational as always, I truly admire all your efforts! 👍🏽
Hey my brother, thanks for your honest comment and support as always 🙏 I really appreciate it and happy to have you here 👍Being humble and grateful is secret to success, as long as you are willing to learn. I wish I had someone to teach me all the tricks and tips when I started out. You are right, knowledge is usually not for free and you need to pay big bucks for it. This way, people get so much info and tips for free!
Do you move the wire inside to side to side or it's in the middle at my company most big pipes we use 3/32 wire 2.4 mm I heard in of the videos that this it normally cz corn cave so if I use 2, 4 wire do I have to move to side with wire in the pool
The weld looks great! Cool video, I learned some new things. And that part about saving pennies while spending dollars is everywhere, probably not much we can do about it...
Amazing content as always 💪🏻, you do inspire us youngsters the tips you have are great on the tig I’ve always been good with the stick because I done a lot of it but with the tig I always struggled when the gap closed up but without knowing how to open up the butt you really do struggle so I’m glad your showing this on your channel keep up the good work 💪🏻💪🏻
Out of all the informational videos on welding yours are the best because its in real world scenarios. Thank you! What are you using to film the arc shots? Very cool.
@@veryhigh2 it still helps to have quality equipment bro. I don’t disagree with you, but I believe in spending the money and investing in your future/career
Excelent video again, good explanation. I found the tip about keeping the rod 50/50 on the bevel edge, insaid and outside quite helpful. 🙏 Thanks for sharing. Close shoots were great. If possibile in the future it would be great to see zoom out scene, from your hand were you feed the rod. Just an idea, to see how you rest your hand on the pipe. How fast you feed the rod. Do you rest the rod on the tack when feeding. And so on. Cheers
Hi bud! With all respect to you, I think it’s too much to ask from the guy who really explains everything in the detail, and most importantly, for free!! If you go to any college or coarse to learn that, you would need to be paying at least 15 grand!! Any older or experienced welders at job sites are not very keen on sharing any tips or knowledge, as we all know! As you can see, he doesn’t even have so much subs, as for example guys like elosta or welding mon, who have much bigger subs base, and have videos which are 2 min-3 min in duration and give you basically nothing and you can hardly learn anything from them! That’s just my opinion…
@@mikewelder7014 you are probably right about all what you write. Didn't thought that way. My apologies ,at least. Also I try to film my self welding before, so i can analyze my mistakes later. It was very difficult to get good shoots. Reason more to appreciate all the videos published on the channel even more.
Really beautiful, wish i could work with you and learn your techniques, you are really awesome welder brother❤👍, i will continue to follow you... thank you for all your help
Execelente video de primera calidad el video y el trabajo para el que se está iniciando le viene muy bien para el próximo podes combinar primer y segunda pasada con tig y remate con electrodo? si podes estaria genial ver un video asi
Could you do a video on how to weld a consumable insert?! I thinks it's also called a grinnell ring, EB insert...it's a metal ring on the inside of the pipe that becomes the root weld
Thank you for this lesson. All the best in 2023!
Thanks man! All the best to you as well!
You the only guy on yt family who explain the tig welding pipe nice and soft..the visuals are clear .you don't rush🎉❤ thanks nan
All the way from South Africa 🇿🇦🇿🇦🇿🇦📍📍
Thanks brother I appreciate that 👊👍
Very smooth root in there. Very consistent no high or low spots. True professional and explain your steps.
Very nice job!!! I learn alot from your videos.Thank you!!!!
Glad to hear it!
Great video. Your stops look great. I still need some work to get there.
Thanks buddy, you can do it 👍
Smooth as always, thanks
Thanks brother 👍
Way to go brother!!👍🏻
Amazing tutorial my man! I really hope young welders appreciate free knowledge and tips that are getting from you here, as you would need to pay big bucks for this amount of welding tips! Incredible and extremely educational as always, I truly admire all your efforts! 👍🏽
Hey my brother, thanks for your honest comment and support as always 🙏 I really appreciate it and happy to have you here 👍Being humble and grateful is secret to success, as long as you are willing to learn. I wish I had someone to teach me all the tricks and tips when I started out. You are right, knowledge is usually not for free and you need to pay big bucks for it. This way, people get so much info and tips for free!
Do you move the wire inside to side to side or it's in the middle at my company most big pipes we use 3/32 wire 2.4 mm I heard in of the videos that this it normally cz corn cave so if I use 2, 4 wire do I have to move to side with wire in the pool
Feed in the middle
The weld looks great! Cool video, I learned some new things. And that part about saving pennies while spending dollars is everywhere, probably not much we can do about it...
Thanks bud, yeah unfortunately we can’t, but we can crank that amps and melt them away until we get what we need 😂
@@X3MTIG Hell yeah man... hahahaa
Lovely work great finish 👌 what angle do you prep the bevel on the pipe .
Thanks bud, around 30-35 degrees
Very clean my man! Great job explaining and teaching!
Thanks for your comment! Glad you liked it!
Your videos are great, I binge watch em, then I practice like alot, the amps are pretty high for me, but Im getn there.
Thank you
Hey bud, I’m happy to hear that! You’ll get there, keep burning those rods! 👍
@muccabelly1324 I binge watch them aswell so you're not alone😅
Hello I'm from Phillipines 🇵🇭 so amazing this video great for ideo for the beginner like me☺️❤️
Super video buraz, rasturas! 👍🏻
Hvala brate 💪🍻
👍🏻Odlican video!!!
Amazing content as always 💪🏻, you do inspire us youngsters the tips you have are great on the tig I’ve always been good with the stick because I done a lot of it but with the tig I always struggled when the gap closed up but without knowing how to open up the butt you really do struggle so I’m glad your showing this on your channel keep up the good work 💪🏻💪🏻
Hey brother, thanks for your comment, I’m happy to hear that 💪
Really nice beads
Thanks for good vid!
Glad you liked it!
Out of all the informational videos on welding yours are the best because its in real world scenarios. Thank you! What are you using to film the arc shots? Very cool.
Hey brother, thanks for your comment and support!
@@X3MTIG Anytime brother! So what do you use to film? 😉
@@abreitenbach Nothing fancy man, some not the best camera set up😉
Beautiful welding root
Muito bom esse acabamento, Top essa solda.
Qual o modelo e o fabricante dessas tochas que você usa?
Weld craft 150 amps
Love it bro! 🔥 👍🏽
Thanks brother 👍
Great insightful video!! Thank you man! 🙌🏻
Glad you liked it!
“Million dollar job with a 75$ tig torch” I felt this in my soul…
The beauty of our trade! 😉
Bararilar diliyorum sana ustam
That's all you need pimp. The money is in the hand.
@@veryhigh2 it still helps to have quality equipment bro. I don’t disagree with you, but I believe in spending the money and investing in your future/career
keep up the good work bro
Thanks, will do!
Excelent video again, good explanation. I found the tip about keeping the rod 50/50 on the bevel edge, insaid and outside quite helpful. 🙏 Thanks for sharing.
Close shoots were great. If possibile in the future it would be great to see zoom out scene, from your hand were you feed the rod. Just an idea, to see how you rest your hand on the pipe. How fast you feed the rod. Do you rest the rod on the tack when feeding. And so on.
Cheers
Hey bud thanks for your comment, I’m glad that tip helped you!
Hi bud! With all respect to you, I think it’s too much to ask from the guy who really explains everything in the detail, and most importantly, for free!! If you go to any college or coarse to learn that, you would need to be paying at least 15 grand!! Any older or experienced welders at job sites are not very keen on sharing any tips or knowledge, as we all know! As you can see, he doesn’t even have so much subs, as for example guys like elosta or welding mon, who have much bigger subs base, and have videos which are 2 min-3 min in duration and give you basically nothing and you can hardly learn anything from them! That’s just my opinion…
@@mikewelder7014 you are probably right about all what you write. Didn't thought that way. My apologies ,at least.
Also I try to film my self welding before, so i can analyze my mistakes later. It was very difficult to get good shoots. Reason more to appreciate all the videos published on the channel even more.
Great job brother🎉
Really beautiful, wish i could work with you and learn your techniques, you are really awesome welder brother❤👍, i will continue to follow you... thank you for all your help
Thank you so much 😀
Excelente profesional...muchas gracias por compartir tus técnicas campeón 💪✌️💯💯💯
Would be nice to see the roots after the weld is finished.
Hey bud, I always do, but they rushed me so I forgot!
Where do u order replacement parts for those torches? I can only find the whole torch set up, not the parts.
Check miller website or local welding shop supply
Nice👍😊
Thanks 😊
Execelente video de primera calidad el video y el trabajo para el que se está iniciando le viene muy bien para el próximo podes combinar primer y segunda pasada con tig y remate con electrodo? si podes estaria genial ver un video asi
I’ll try in the future when I get a chance!
Sir, you upload 1 video on 2 positions, in which you will tell the best methods and tricks, please sir.
Okay sure
Eu sou soldador e quero aprender fazer raiz igual vocês aí quero ser um ótimo profissional igual a você e vocês vocês estão de parabéns
Parabéns! Excelente vídeo!
Could you do a video on how to weld a consumable insert?! I thinks it's also called a grinnell ring, EB insert...it's a metal ring on the inside of the pipe that becomes the root weld
Gorgeous jobs good luck man.
Thanks a bunch!
#What kind of wire do you use, trick please, LB 3.2 or not?

Nice job
Nice job👍Youre Tig Torch is cooled by air or liquide.
Hey bud, just Argon cooled torch 😉
Amazing ❤️❤️❤️
Thanks, great!
very nice job.
What lens do you use
Great tips, thx.
You are amazing brother..
Thanks bro! 👍
Makes me want to be a welder
Why do you use TIG Welding??
Is it stronger than SMAW welding?
TIG is welding procedure in this case! Yes, TIG is stronger than SMAW welding.
Sir I am Binu from India, sir how many different materials can welding tig welding?
Do you use s2 rod??
No, 70S-6 filler wire!
Nice!!
where do you go to find jobs that your on ?
Jobs find me bro 😉
Hell yeah I didn't know if you used roadtechs or hotsheets something like that
What machine do you use?
Miller XMT 350
Parabéns video muito bom ?
Muito obrigada ✌
Amp?
Root pass amp how much
120
3" Pipe ma phir kitna la na ha
Boa noite eu me chamo Luiz Ricardo sou soldador
Berapa ampernya rut
Bien
Flease chek root finis brow
Poproszę Polski język do tłumaczenia filmów na kanale X3M TIG !!!
It should be auto translate option in your video settings !
@@X3MTIG There is no Polish language in the auto-translation
HI RESPACTABILE SIR VERY NICE GUIDE DIR IAM A WELDER DOWN HAND PIPE Line SUI GAS COMPANY FROME PAKISTAN KARACHI MUHAMMAD KHALID KHAN
who much AMPER?
Сварщик все по сварке. Выкладываю
Дайте перевод
uh uh ok uh uh uh
I'm Korean welder.
100%RT
If you make use of 10mm bullets you don’t have to grind the tags out.