1967 Ford F350 Dually Ramp Truck Race Hauler 390 V8 1/25 Scale Model Build How To Assemble Paint
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- www.modelround...
If you have defective parts you should contact Moebius directly at the following contact:
Email: customerservice@moebiusmodels.com
www.moebiusmod...
#Scalemodel #ford #f350 #ICM #scalemodelling #Kit #Reviews #Plastic #Scale #Model #Models #AMT #Tamiya #TamiyaUSA #Revell #MPC #Academy #Italeri #Ford #Tank #Armor #Aoshima #Hobbyboss #Modelroundup #Tool #Tools #adamsavage #onedaybuilds #onedaybuild #tested #scalemodels #hpiguy #hpiguys #hpiguysworkshop #Scale_model #hobby #hobbies #2022 #model #models #modelling #scale #modeling #weathering #howto #diy #create #make #STEM #future #floor #polish #tutorial #decal #decals #waterslide #automobile #dragrace #race #bigblock #chevy #chevrolet #musclecar #muscle ##dually #race #ramptruck #390 #moebius
1967 Ford F-350 Ramptruck 390 V8 Dually 1/25 Moebius 2587 Race Hauler
Features:
Twin-I-Beam Front Suspension
Dual Rear Tires and Heavy Duty Wheels
Full Interior
390 CID FE V-8 Engine
Detailed Chassis
Race Car Ramp Bed
Chrome Plated and Clear Parts
Soft PVC Tires
Decals
Measures 10" Long
The Ford F-Series is a series of light-duty trucks marketed and manufactured by Ford since the 1948 model year. Slotted above the Ford Ranger in the Ford truck model range, the F-Series is marketed as a range of full-sized pickup trucks.[1] Alongside the F-150 (introduced in 1975), the F-Series also includes the Super Duty series (introduced in 1999), which includes the heavier-duty F-250 through F-450 pickups, F-450/F-550 chassis cabs, and F-600/F-650/F-750 Class 6-8 commercial trucks. The most popular version of the model line is the F-150 pickup truck, currently in its 14th generation. From 1953 to 1985, the entry-level F-series pickup was the ½ ton F-100.
The F-Series trucks have been developed into a wide range of design configurations during their production run. Alongside medium-duty trucks and "Big Job" conventional trucks (the forerunners of the Ford L-series), the model line has been sold as a chassis-cab truck and a panel van (a predecessor of the Ford E-Series). The F-Series has also served as the basis for multiple full-sized Ford SUVs, including the Ford Bronco, Ford Expedition/Lincoln Navigator, and Ford Excursion. The F-Series has been marketed by its three North American brands, as Mercury sold the model line as the Mercury M-Series in Canada from 1948 to 1968; Lincoln sold the F-Series during the 2000s as the Lincoln Blackwood and the later Lincoln Mark LT.
Since 1977, the F-Series has remained the best-selling pickup truck line in the United States; it has been the highest-selling vehicle overall since 1981.[2][3] The F-Series is the best-selling vehicle in Canada for over fifty years.[4][5][6] As of the 2018 model year, the F-Series generated $41 billion in annual revenue for Ford.[7] By January 2022, the F-Series models have been sold 40 million units.[8] Currently, Ford manufactures the F-Series in four facilities in the United States.
Introduced in 1967, the fifth-generation F-series pickup was built on the same platform as the 1965 revision of the fourth generation. Dimensions were increased, engine options were expanded, and plusher trim levels became available during the fifth generation's production run.
Suspension components from all 1969 F-Series models are completely interchangeable.
For most of its production, the F-Series was sold in a medium-duty conventional truck configuration alongside the traditional pickup trucks. Beginning in 1948 with the 1½ ton F-5 (later F-500), the medium-duty trucks ranged up to the F-8 (F-800). Prior to the 1957 introduction of the Ford C-Series tilt-cab, the medium-duty range was offered as both a conventional and in a COE (cabover) configuration.
Following the introduction of the fifth-generation F-Series in 1967, the medium-duty trucks were designed separately from the pickup truck range. Although remaining part of the F-Series range, the medium-duty trucks shared only the cab and interior with the F-Series pickup trucks. Since 1967, the cab design has changed only in 1980 and in 2000. Redesigned on an all-new chassis, the 2016 F-Series medium-duty trucks retain an updated version of the 2000-2015 F-650/F750 cab.
The medium-duty F-Series served as the donor platform for the B-Series cowled bus chassis produced from 1948 to 1998. Produced primarily for school bus bodies, the B-Series was discontinued as part of the sale of the Ford heavy-truck line to Freightliner in 1996.
Slept in, had a fantastic breakfast buffet, went to my closet hobby shop and found the new Ramp Truck and a past kit I missed out on. And then I sit down with my favorite beverage and see your current build video waiting for me.
Best Saturday Ever!
8mmmmmm lol
Now that there is a fantastic truck and I wonder, Could an F350 wrecker be far behind??, Thanks for another great build presentation!!!.
Yesss I would love a wrecker, Cooters tow truck perhaps ¿?????
Wreckers have been overlooked guy way to long
Man I have always loved Moebius kits because of the box art, the ridiculous amount of options, the fit and finish, and the full color instruction manuals !!!! Love it
Awesome, Awesome, And Awesome work. I have learned so much watching your videos, You are definitely a person that can inspire a person to enjoy modeling . Thank you so much.
These castings are sooo detailed. I understand, for time, you show the parts pretty fast. Of course we get a better look while you paint, assemble and weather. My question - with such detailed castings, how many coins are in the ash tray? I know, I had too... Diorama idea - sitting in a shop with one rear dully set off for brake check and hood up and valve covers off - "maintaining the ramp rig".
Nice build - thanks so much for doing this, your works are much appreciated.
On these Moebius Ford truck kits I always attach the cab interior as I'm assembling the chassis. It makes attaching the cab easier for me and can help if the frame is warped.
Frame looks perfect for a jimmy flintstone cab over body
Great build as always, I just thought of something regarding those heavy duty rims and tires, those would look great on the 1967 Ford F-100 service truck you did the build review on😊😊❤❤👍👍
Great work on building this kit. It looks great. I really appreciate you providing contact information for Moebius, if issues arise. It’s really sad that you had to explain “acting like an adult” when sending an email about issues. Thanks for sharing.
What happened with the plastic between the ramps, it looks like the plastic is rough , in kind of a large half moon across those doors. Was thinking of buying this kit, but it might be smart to wait a bit for the QC updates. Kit looks great, wouldn't know the hood was sunk, looks spread , glad their taking care of people.
i love this build chris i do believe there is a f-250 wrecker is in the works at moebius coming in early 2023 lets hope so
I hope moebius does mopars to this level of detail
HemiCuda
Hemi Dart
Superbird and Bee
Can't believe they give you a C4 transmission for that big ass truck
I don't know about anyone else hpi. But I appreciate and love watching your builds. Sorry about the hood. I still wish the model companies here would bring the production back here. Take care and God Bless.
The back ground takes away from from the kit building love your channel just not the new back ground
I have five different Moebius Ford pick-up kits in my stash. I have been trying to decide on which one to use in a kit-bashing project that will incorporate the
old Monogram Garbage Truck / rock band stage kit by Tom Daniels. The extended frame of this ramp truck may be a better donor than the other regular
pick-ups. The "tire rack" portion of this kit will also work well for the amps and other equipment for my rock band. Thanks for the high lights.
Nice build Chris, I agree when you're dealing with the manufacturer, be cool about what you need.
You get more bees with honey than you do with vinegar.
I wish they would do the Snake & Mongoose Dodge race trucks. 4:29 diffs one looks like a front for 4x4. The hood is dented by someone stood on it.
That's a great buid. And thank you for INFO for letting people know about the warped parts and how to get the replacement parts.
Very cool build Chris, I really like this kit, looks like a fun one.
That is a great kit! 👍👍
Despite the issues that you found Mobius is still in my opinion a very good kit maker and it's really cool that they are going to do whatever they can to make it right hopefully they get the bugs worked out soon
From the time I first saw this kit I thought it was an interesting subject and I like the way it's building up. Since AMT did their Chevy from this same era with this type of set up as an option - TBH I prefer the duallie rather than the tandem single wheels they have on the back of theirs - when is a Dodge one coming out?
Great job Chris! Looks like most issues worked themselves out. Nice kit, thanks Moebius/model king.
Great video Chris but I'm not liking your overhead shots, hands need to be on bottom of screen so it looks like we're building.
If you're watching on your phone, just lay it flat and turn it upside down lol. That's what I do.
Stop watching and go do the dishes or something.
..man ..like mama said " if you got nothing good to say..... "😒
Beautiful build again my man , I love your work and thanks for so much info n ideas
*GREAT* work as usual, *Chris* . I have wanted one of these since its announcement; since seeing the prototypes. It is too bad about the warped bonnet; the rest seems to work themselves out (though I have seen examples of severely-warped ramp bedsides and flooring. I certainly hope that Moebius et al. eliminate these unfortunate issues, and that the next run has an updated part number (e.g., a "-2" or an "R" for "revised").
I am surprised that the instructions call for the *FMX* automatic vs. a manual trans. (no comment on the sink marques on the FMX's pan...), as I'm sure that most of the F-350s had a "Creeper" 4-speed.
Ne'er-the-less... I like the colour choices you went with (blue is one of me favourite colours).
*Thanks* for sharing this build-up!
Great job Chris.Keep it going. 👏
I’m wanting to buy one of these and do some modifications to it, in order to have it haul two Revell ‘69 Shelby GT500 Mustangs.
Question: I'm just getting back into modeling after a 50 year absence...what are you using to glue with ? I see a tube, a brush with a cap, and a mini turkey baster lookin' thing.
Bought this kit just now, to shorten up the frame and driveshaft to add my Open Road camper kit! Will be perfect (hopefully)
Just bought a Mobius golden commandos had no idea it was in cahoots with model king I would’ve never bought it. If so, that stuff has poo poo both shipping box and model box. We’re perfect model inside was walked contacted them twice no answer.
Absolutely love it, Chris! I can't wait to buy a few of these kits. So the real question is when are you gonna show us around your place? We wanna see everything you've built over the years!
Hey~ I jst went to MRU and picked up this kit, along with two other Moebius ford kits. Thanks for the inspiration. Keep on truckin along.
I don't remember this kit being that good though I think I built it as a Chev. That one-piece ladder frame is nice, as are the slotted wheels. The twin I-beam front axle is very nice as is the choice of transmissions.
I could see a late-model stocker or a sprint car on the deck.
Very handsome build!
Thanks for posting brings back memories when I used to make models be safe
I bought it but I'm afraid to open it and check it. Not because of maybe finding warped parts, but because i would set aside all my other half finished kits to do this one lol
How easy would it be to cut the frame down to standard length? I want to use one of them to make an accurate Cooter's Tow Truck.
Thanks to this video I ended up pick get the &2 chevy ramp truck. lol
Would using a little bit of heat help straighten out the warping without causing further damage?
I just started building this kit and the hood is really, really warped so I will email them
Are those 4WD front axles? I noticed the center section is off center. Can we make this a 4x4?
Looks nice, especially with a race car on the back. / Thanks.
When I got a look at the truck on the turn table the tail lights reminded me of a '60 Impala.
Another great build/review Chris! I may have to get ahold of one for myself. Thanks for the review. 😎👍🏾
Put a Richie Evans coupe or a Troyer type pinto on the back will transport me back to the Saturday nights of my youth. Great build as always love those type of memories coming back.
Or even a Dr.Dirt Dick Bergeron super modified on it in a girls college parking lot on Monday morning. LMAO a true story!!!
Why do seem to always paint it like it on the box only a few times seen had painted it different and hope to here back
Looks awesome 👌, you can also put the hood in some hot water and try to straightened it out. I've used this technique and sometimes it helps straightened out warped parts. Just little FYI if uou don't want to contact the manufacturer.
I’m getting one of these for my birthday next week I hope it’s not worped to bed
Do you ever do any tow trucks I'm about to start a tow truck never done one myself
Im no Ford fan much at all but i have both kits the '72 Chevy and this one. This Ford puts Chevy's ramp truck to shame
Yeah, 50 years of kit technology between them.
thanks for the truth on the warpage enjoyed the vid
I truly enjoy your videos . Watching ur videos doing the thing you do step up my building skills . I am definitely going buy this ford ramp kit not a ford guy but I do like this build you done thank you sir can’t wait for the next one
Great build ! Love the detail that you put into each build. I have bought a few of these kits now. Got mine through Ebay though, they had it for $59.44 shipped, where as model roundup had it for $77.46 shipped. Almost $20 difference. Can put that toward my next model.
I've heard a lot of praise for Mobius, but I have had trouble with fit and warp in all their kits that I have built (Ford Pickups and Hudson Hornets). Also their instructions are inferior to the more illustrative focused Revell and even AMT.
Great review,really dig that front grill.awesome build. Thanks Chris big fan of your channel.peace.
Hey I was expecting I might hear an explanation or a defect regarding how that windshield fitted in there it looked like it was really giving you alotta trouble...kinda reminded me of days as a kid covering windshield glass in glue trying to install em...thanks fer yer builds on TH-cam I'm here strictly for the car&truck builds and been watching yer videos since day one on here keep em coming I love it
Nice work. Thanks for explaining the issues as you found them. The honesty without “trashing” the company is appreciated. Can’t wait to get my hands on this one. Seems like so many customizing and scratch building opportunities. Can’t wait! Thanks again for the content.
This was the 1 I was looking forward too
In ur preview vid of a bunch of kits u mentioned ppl who buy kits and don't build them.....y would sumone do that?
As high as everything is seems like a big waste of money
Another awesome build. Thanks for sharing as always. Love the videos man
Great vid. I can’t say enough how much these vids teach me. I did another version of this particular cab from Mo. not sure the name. But thankfully, I has no warpage issues. By the way, I’ve lost/wrecked/or kit missing parts over the years from both Round 2 and Moebius. They BOTH were very quick to help and to send new parts. Only time I had to pay, it was due to my own fault. But if the kit part was simply missing or short shot, they sent the part for free. Thx for the vid, Chris.
Another Awesome Job Chris, thanks For Sharing n God Bless All 👍👍 Gary.
That is a lovely F350 race hauler Chris! Been eyeing it for a while, good to know about the warp issues!
Nice build sir that’s a cool looking truck it’s another one I will be getting when it comes to Australia might take awhile because I just got my hands on the MPC Chevy car carrier 👍🇦🇺
Man your freehand paint work amazrs me, great job!
Thank you! Cheers!
'68 Mustang fastback with Tasca Ford decals would look boss on that. Great build, love the dry brush on the bed! 🚙
Never built a Moebius kit, but this one will probably be the first one. So many ways to make it look sweet!! Chris your version of this kit is awesome!!!
Beautiful work. Hardest part is - finding this kit in stores.
Same goes with correct floor polish liquid. Unless I pay quadruple or more to eBay hucksters.
I contacted them directly by e-mail and they sent me all new parts free, no shipping cost at all
Good!
Another great video Chris, so cool with all the Ramp truck we have nowadays, I can't wait to get this one!
I pre-ordered from model round up and had no plans to build it for awhile. After watching this episode I immediately opened it and discovered that half of my floor pan isn't even molded. I recommend checking them
Wow! Brilliant kit , brilliant job mate👍
This is a very beautiful build. I like these trucks.
What kind of glue is that need that
AMT just raised the bar with their Budd wheel option for big trucks in the trash truck kit. I wish Moebius gave us accurate 4-hole steelies for this rig. It's disappointing when the wheels on a kit aren't as well represented as the rest of the kit.
My dad worked for a towing company and when he would use this monster, I would get on it with him! Wow! Good build and thank you for the memories!
Hey man I just want to say thank you for what you do for the hobby, and watching this video I see that you have a bit of trouble with the firewalls on these moebius bumpside fords, they drop right in from the top in the engine bay, instead of trying to install it from inside the cab, I did that too on the first couple of those cabs, but figured out it’s a whole lot easier going in from the engine bay side, hope this helps, build on brother!
Had to say something about the window! Also it looks like you spray heavy. How long do you wait to start handedly?
Great job considering the issues. Thanks for the parts info.
You have the best videos.. You have an unboxing...then you show the build and then final review.
You need a falcon drag car on it. Lol
That sure did build up nicely. Maybe that’ll be my next project.
What glue are you using
Awesome build. Super job ovecoming those small issues.
What is a work day meal
Trying to go to the link provided to solve the issue and it keeps saying the page can't be found
Simply use the email provided.
The link only takes you to their website and all that website provides is the same email I posted.
@@hpiguy I got to it and they responded almost immediately. They said they've been having many problems with warped parts, especially the ramp parts. They informed me that they were aware of some issues and have already ordered replacement non warped parts but they will provide take awhile to be shipped to them. It's understandable and I don't mind waiting. I'm happy with the quick response and the issue being taken care of. I currently have about 12 Moebius kits in my collection and look forward to building them all eventually. I haven't built any of them yet. One day lol. Thanks again for great videos and tips and information on new releases and such. Have a good day
Is great great job
That's a killer kit, beautifully done!
Nice job Chris thank you for sharing 😊
Thank you for sharing this sweet model with us. This is a must have!
Nice looking build sir! Great job as usual!
Another awesome hit out of the park Chris stay safe and positive
Wow this is a must have for me! Hope it hits the store shelves soon
While the kit looks great in the box, there is some serious warpage issues w/ the ramp body pieces.
The warpage issue, although real, is not universal. I have seen some absolutely nightmarish pictures, and I was REALLY nervous opening the two kits I just bought from my local hobby shop. I breathed a huge sigh when I inspected them & discovered them to be just fine (or with such minor warpage I couldn’t see it. My sympathies to those who got warped kits, but it isn’t all of them.
@@PontiacBanker I’m glad your kits were pretty much warpage free, both kits I have have serious warpage issues on the ramp body pieces, and one frame has a really bad twist.
The warp issues many are seeing are completely covered in the video more than once and how to contact Moebius for replacement parts, as well as in the video description.
Great build and presentation Chris!!
Another great video. Thank you!
Another awesome build!!
Killer job as usual... Awesome!
Very nice job - looks great.
Very cool build!
Cool build, awsome video as always !