Having bought an IKEA kitchen, we already had a newish dishwasher. IKEA sourced the sliding hinge for us free of charge, but it never was satisfactory.The fascia kept detaching from the dishwasher door. We contacted Adapt-R who we found to be very helpful. Whilst their part may seem expensive we thought it well worth trying, especially with an assistance or money back guarantee. WE ARE NOT DISAPPOINTED. It works perfectly and we are very happy to recommend it.
Ich bin sehr glücklich mit dieser Lösung. Ich wollte einen Markenspülmaschine und mit diesem Adapter innerhalb eines Vormittages als totaler Nichtkönner hinbekommen :-)
Can I buy this adaptor ? I want to adapt a Bosch Disheasher with all the Ikea parts you mentioned. Of course the Bosch does not adapt to the Ikea parts so hope this will work
I have built my own kitchen from scratch, and am now trying to fit an integrated dishwasher. Because my units are 780mm high (880mm with legs) the door will not open to 90 degrees (or anything close). Will this kit help my situation?
Hi Pamela, our system works indeed in your situation. The only difference between your situation and the standard installation manual is that your front is 20mm smaller. In your situation the drilling template must be a little tweaked to get it work. Kind regards, Rob Tangenberg
Thank you so much for your reply. You so my front is smaller though. I think it is actually taller than usual: 780mm is the measurement of the cabinet alone.. with the legs on it is 880mm. Do you still think it would work?
I have an ikea dishwasher but am missing the resonlig plastic hinges. They are no longer available. Will the Adapt R system still work on an Ikea branded dishwasher that already has the slide holes integrated I to it. Can these just be ignored and install the system regardless. My kitchen is unfinished due to this nightmare part shortage from ikea. The staff there were not helpful either at solving my issue. Thanks
Good day. You can use the Adapt-R without any problems. Is your machine standing between two cabinets or panels? Then we recommend the Premium60. If your dishwasher is next to a wall or perhaps at the end of a cooking island, you need the PremiumPlus60. If your dishwasher is 45cm wide, you'll need the 45cm versions. Do you have any questions. Feel free to ask us!
so are you saying adapt-r OR vaglig? they already gave me the vaglig, but in the instructions it's showing that some additional mounting pieces would be found in the dishwasher they sell...
w00tzs you need the adapt-r Connect-r or Vaglig with Behjalplig. In your case I would recommend and adapt-r Easy. It comes with standard Connect-r and you can return the Vaglig to IKEA
Douwe Reitsma, currently not. But we do have a photo guide with text that tells you what to do in each step. You can find it in English on this url: www.adapt-r.co.uk/installation-dishwasher-sliding-hinge-in-an-ikea-kitchen/ Please let me know if you need help.
We bought the basic version, the 4mm screw just won't fit in the hole. It took 30min trying only to realize it was impossible and we made the hole again.
Hi Paul, the system solves the same issue but is made out of different materials. Also the adapt-r wont break. adapt-r is thinner, lighter and fully made of stainless steel and aluminum. Simply said it is a different product.
Having bought an IKEA kitchen, we already had a newish dishwasher. IKEA sourced the sliding hinge for us free of charge, but it never was satisfactory.The fascia kept detaching from the dishwasher door. We contacted Adapt-R who we found to be very helpful. Whilst their part may seem expensive we thought it well worth trying, especially with an assistance or money back guarantee. WE ARE NOT DISAPPOINTED. It works perfectly and we are very happy to recommend it.
lynda frost thank you for your compliment!
Same problem here. Keeps popping off and finally the plastic swivel point has snapped, so Adapt-r, here we come...
Ich bin sehr glücklich mit dieser Lösung. Ich wollte einen Markenspülmaschine und mit diesem Adapter innerhalb eines Vormittages als totaler Nichtkönner hinbekommen :-)
Can I buy this adaptor ? I want to adapt a Bosch Disheasher with all the Ikea parts you mentioned. Of course the Bosch does not adapt to the Ikea parts so hope this will work
I have built my own kitchen from scratch, and am now trying to fit an integrated dishwasher. Because my units are 780mm high (880mm with legs) the door will not open to 90 degrees (or anything close). Will this kit help my situation?
Hi Pamela, our system works indeed in your situation. The only difference between your situation and the standard installation manual is that your front is 20mm smaller. In your situation the drilling template must be a little tweaked to get it work. Kind regards, Rob Tangenberg
Thank you so much for your reply. You so my front is smaller though. I think it is actually taller than usual: 780mm is the measurement of the cabinet alone.. with the legs on it is 880mm. Do you still think it would work?
Yes no problem. It is taller than usual but thats were adapt-r is for. For the slimline dishwasher you need the premium 45
The drilling template is made for a front of 60x80cm. This template is limited in width and height. So the Premium60 is fine!
Brilliant. Thank you.
I have an ikea dishwasher but am missing the resonlig plastic hinges. They are no longer available. Will the Adapt R system still work on an Ikea branded dishwasher that already has the slide holes integrated I to it. Can these just be ignored and install the system regardless. My kitchen is unfinished due to this nightmare part shortage from ikea. The staff there were not helpful either at solving my issue. Thanks
Good day. You can use the Adapt-R without any problems. Is your machine standing between two cabinets or panels? Then we recommend the Premium60. If your dishwasher is next to a wall or perhaps at the end of a cooking island, you need the PremiumPlus60. If your dishwasher is 45cm wide, you'll need the 45cm versions.
Do you have any questions. Feel free to ask us!
@@hendrikustangenberg7608 many thanks for replying . My dishwasher sits between two units and is 60cm wide.
Also, my dishwasher is a slimline one..?
so are you saying adapt-r OR vaglig? they already gave me the vaglig, but in the instructions it's showing that some additional mounting pieces would be found in the dishwasher they sell...
w00tzs you need the adapt-r Connect-r or Vaglig with Behjalplig. In your case I would recommend and adapt-r Easy. It comes with standard Connect-r and you can return the Vaglig to IKEA
I need a video for the premium version. Is that being made?
Douwe Reitsma, currently not. But we do have a photo guide with text that tells you what to do in each step. You can find it in English on this url: www.adapt-r.co.uk/installation-dishwasher-sliding-hinge-in-an-ikea-kitchen/
Please let me know if you need help.
Pricing is laughable!
If anyone has had someone install this in north london and can recommend a fitter - please let me know!
We bought the basic version, the 4mm screw just won't fit in the hole.
It took 30min trying only to realize it was impossible and we made the hole again.
Can I apply this system on the dishwasher with Autoopen drying system like miele g6770scvi?
Ikea sell Behjalplig for £35. Why is your kit so expensive?.
Hi Paul, the system solves the same issue but is made out of different materials. Also the adapt-r wont break. adapt-r is thinner, lighter and fully made of stainless steel and aluminum. Simply said it is a different product.