THANKS for the video. We are in a small town and I go to the Chevy dealership for my service because they warranty parts and labor. The engine light came on with the P0013 code. Then it would go out for a few days and come back on. I did not experience any driving issues. The dealership labor is HIGH and then take a big markup on parts. I was able to complete the repair in about 20 minutes and less than $90 for both AC Delco sensors from Amazon. Cleared the codes and started right up - no engine light. I checked the old sensors and the exhaust was within limits but the intake was all over the place. I only have 1k miles on the oil change, but will schedule a change. Thanks again for the best out of a dozen or so videos I watched.
Thanks for all the help! I was able to get it done, just took a few minutes longer. I also found a little left over nest from a mouse or something that I vacuumed up too.
Awesome video. My dad has 2012, so the solenoids are right there. I need a b solenoid, but like you said, I might as well do them both. It's not expensive to fix. My neighbor said, "Try cleaning it out. I don't want to try it.
I have a 2013 Equinox 2.4L. I got code P0010 and engine stalled. Replaced both intake and exhaust solenoids. Now I'm getting code P0013 with check engine light on. Engine is running fine, no stalling, no more rough idle, gas mileage has greatly improved, but code P0013 keeps coming back on after clearing. Advice?
![How to Fix P0013 Engine Code in 4 Minutes [2 DIY Methods / Only $6.63]](http://i.ytimg.com/vi/t8TG_Q7QhvI/mqdefault.jpg)
![How to Fix P0013 Engine Code in 4 Minutes [2 DIY Methods / Only $6.63]](/img/tr.png)
THANKS for the video. We are in a small town and I go to the Chevy dealership for my service because they warranty parts and labor. The engine light came on with the P0013 code. Then it would go out for a few days and come back on. I did not experience any driving issues. The dealership labor is HIGH and then take a big markup on parts. I was able to complete the repair in about 20 minutes and less than $90 for both AC Delco sensors from Amazon. Cleared the codes and started right up - no engine light. I checked the old sensors and the exhaust was within limits but the intake was all over the place. I only have 1k miles on the oil change, but will schedule a change. Thanks again for the best out of a dozen or so videos I watched.
Thanks for all the help! I was able to get it done, just took a few minutes longer. I also found a little left over nest from a mouse or something that I vacuumed up too.
@@MarkThomasBuilder lol 🤣 the nest is put to rest
Awesome video. My dad has 2012, so the solenoids are right there. I need a b solenoid, but like you said, I might as well do them both. It's not expensive to fix. My neighbor said, "Try cleaning it out. I don't want to try it.
Thanks for the vid. 👍👍. Just did this on a 2014 Buick Verano. (Same 2.4 L Ecotec Engine)
Excellent! I'll be doing this today myself!
You get it girly that's awesome 👌 thanks for the sub
@@automotivetech-vet it literally took me 25 minutes to do it all, I followed your video step by step!!! Thank you sooo much!!
Your very welcome
AWESOME post.🙏🏽👍🏼
I have a 2013 Equinox 2.4L. I got code P0010 and engine stalled. Replaced both intake and exhaust solenoids. Now I'm getting code P0013 with check engine light on. Engine is running fine, no stalling, no more rough idle, gas mileage has greatly improved, but code P0013 keeps coming back on after clearing. Advice?
Worn timing chain and broken timing chain guides very common issues pull off the valve cover and check for broken guides my friend
Does it need to be relearn after these actuators replacement?
No
Anychance i would get 02 sensor codes even if i changed them already and got a exhaust leak fixed. Suv still stalls and give code for 02
Yes in theory because the timing being off can cause a rich or lean condition
my actuator broke off the bottom.How can i pull it out now?
@@SuperMrempire I've never had one break off you mean the screen and everything the whole tip of it is stuck in the cylinder head
I have the same problem with my 2011 Chevy equinox 2.4 litre and and cant get parts how could i get those parts
Amazon
Sorry my low languages , can you make remplace Cam Shaft (sensor de cigüeñal) pelease tks
I will try as soon as possible