This is exactly what I've been looking for. I live in a similar kind of setting and don't want an open flame burning in summertime. This is perfect. Thank you
It takes about 30-45 minutes to heat. Depends on water temp, exterior temp and so on. Pretty effective though. If I kept it on long enough, you could do a lobster boil in there.
Yup, others have had that comment. Use of the pressure treated is pretty minimal in this implementation though, but I agree that if I were to do it over again, I would use cedar or similar.
True, I didn't want to create a youporn video in the process of making this clip. Big pot of spaghetti was what popped into my head....guess I was hungry at time.
I find that I can heat 75 gallons of water about 3 or 4 times with one 20lb tank. Depends on water temp and ambient air temp and so on, but roughly 3 to 4x per tank.
Considering the adjustment knobs melted away; any concerns about the rubber hose connected to the burners😵💫? With the good water pressure and propane tank, maybe tankless water heater would be a better choice
Hi there. All valid points. I was concerned about the rubber hose on the burners, but there seems to be no issue with it. The plastic knobs ultimately controlled metal components, so that's what I meant when I said that it is now permanently in the 'on' position. Tankless could definitely work as well. I've seen videos with that set up. I opted for this method and so far (knock on wood) it has served me well. This works great in the dead of winter. Fiddling with frozen hoses in the icy cold seems less fun. That was part of the decisioning. Are you thinking of building one of these?
@@TinyIndustrial- yeah when I noticed the rubber hose, I thought eek! I live in a travel trailer in the country, and have been kicking around creating a tub with a water container like that one; hot bath would be nice once in a while😁. I like your idea and thanks for reply✌🏽
Yes, I have had the idea of a pump and an on demand water heater. Not sure how long that would take to cycle 75 gallons through a on demand heater to get the tub up to temp. Would definitely be a safer way to do this.
A tank is good for about 4 or 5 baths. Depends on ambient and water temps. I generally get in when the temp is good and throttle down the burners or turn them off entirely. Takes a while for 75 gallons to cool down. You building one of these?
Sure! You could loop copper coil through a burn barrel type set up. 55 gallon oil drum would likely be overkill but something a bit smaller might work well. I would likely introduce a small pump to move the water through the copper coil setup...might not actually be needed though. Anyone have experience with this that could comment on this?
Setting up one to use wood or cardboard as fuel. I wonder how long it will last til a leak is in effect. But hey cheap. and expensive spas dont last as well
I have had many a bath at this point. So far so good. Even if it started to leak now, I would say that I got my money's worth. I was concerned about this in the beginning as well...not an issue...yet. :)
I suppose so. If exterior temp is not too cold that could work. It may take quite a bit longer for the water to heat up. I can heat 75 gallons of water to bath temp in about 35-45 minutes with my set up. Single burner runs the risk of not getting to the desired temp I suppose. Worth a try.
I was afraid of that too. The bottom of the tank isn't very thick gauge. So far so good though. No issues a few years into it at this point. Are you thinking of making one of these?
@@TinyIndustrial I have two. One tank at my farm is off grid, I put a copper coil that connects to the tank and sits over a fire pit. I also am putting one in the back yard of my house, I can fill up with hot water but I was thinking a small propane burner installed underneath could keep it warm for long time. I just don’t want to ruin the tub. Thought of putting additional metal plate underneath
So basically you built a huge witch 🎉 cauldron to cook humans in the woods.😅 But kidding aside it came out nice 👍I'll be building one myself with the copper coil and wood just to be safer. The pool noodle is a good idea for comfort too.
Heating water in a galvinzed tub is no problem. You only get fumes or chemical leaching when you go to the molting stage of metal. Which is something you wont get from heating a tub of water. Its called science
You can spend more on a bigger tank if you want/need the leg room. That will take longer to heat up though and will use more fuel...plus the tank will cost more to buy. This size tank is fine for me. Sound like you would prefer a bigger one. Mine is the 100 gallon version I believe.
@@TinyIndustrial I'm 6'3" and if I can't stretch out in it, there's no reason to buy one. I wouldn't use it daily. It would be my one man hot tube. It's for my health.
This is exactly what I've been looking for. I live in a similar kind of setting and don't want an open flame burning in summertime. This is perfect. Thank you
Oh good. Glad the video was helpful to you.
I love the pool noodle idea. Thank you for the how-to video. Hope someone brought you the cold one!
Thanks! I love using the thing. Goes well with a beer. :)
You thinking of putting one together?
@@TinyIndustrial yes! Any new suggestions?
@@5280Fix no… not really. Good luck and enjoy!
Nice I am in the process of making a tub out if one of these tanks. Love the wood idea, I would huse a different type, and the noodle is a great idea
Great! Glad the video was helpful. You going to document your build?
Wow simple, I love it. How long does it take to heat?
It takes about 30-45 minutes to heat. Depends on water temp, exterior temp and so on. Pretty effective though. If I kept it on long enough, you could do a lobster boil in there.
building one now thanks for the info ,,im putting two metal plates under keep from burning the bottom out
Hi! Glad to hear that you are giving this a go. Let me know how it turns out. Be safe!
As soon as I started watching your video I thought where is that Coleman 2 burner stove 🤔
Great job and love the view of the creek
Thank you! I appreciate the kind words. It's a great place to take a bath. Really awesome in the snow!
Hippy hot tub. Awesome!🙌🏽
That's right. Thanks!
This is amazing! One caveat, pressure treated wood may be treated with arsenic. I'd replace with cedar. Happy soaking. Cheers!
Yup, others have had that comment. Use of the pressure treated is pretty minimal in this implementation though, but I agree that if I were to do it over again, I would use cedar or similar.
I’ll probably use UHMW
What's UHMW?
Great video! I'm sure that the bathing suit was only used when the camera was on. "A big pot of spaghetti" - haven't heard that for awhile - loved it!
True, I didn't want to create a youporn video in the process of making this clip. Big pot of spaghetti was what popped into my head....guess I was hungry at time.
how much propane does it take? Supercool easy to do..Brilliant!
I find that I can heat 75 gallons of water about 3 or 4 times with one 20lb tank. Depends on water temp and ambient air temp and so on, but roughly 3 to 4x per tank.
Considering the adjustment knobs melted away; any concerns about the rubber hose connected to the burners😵💫?
With the good water pressure and propane tank, maybe tankless water heater would be a better choice
Hi there. All valid points. I was concerned about the rubber hose on the burners, but there seems to be no issue with it. The plastic knobs ultimately controlled metal components, so that's what I meant when I said that it is now permanently in the 'on' position. Tankless could definitely work as well. I've seen videos with that set up. I opted for this method and so far (knock on wood) it has served me well. This works great in the dead of winter. Fiddling with frozen hoses in the icy cold seems less fun. That was part of the decisioning. Are you thinking of building one of these?
@@TinyIndustrial- yeah when I noticed the rubber hose, I thought eek!
I live in a travel trailer in the country, and have been kicking around creating a tub with a water container like that one; hot bath would be nice once in a while😁.
I like your idea and thanks for reply✌🏽
Yes, I have had the idea of a pump and an on demand water heater. Not sure how long that would take to cycle 75 gallons through a on demand heater to get the tub up to temp. Would definitely be a safer way to do this.
Does the wood help not burn yourself.
That's right. Creates a separation from the metal that is being heated directly by the fire. You thinking of building one of these?
Awesome! How long does the propane tank last and how do you modulate the temp?
A tank is good for about 4 or 5 baths. Depends on ambient and water temps. I generally get in when the temp is good and throttle down the burners or turn them off entirely. Takes a while for 75 gallons to cool down. You building one of these?
Would like to have a tour of the tiny house too...
Hi. The house can be checked out here: th-cam.com/video/eIZWFCh6EZQ/w-d-xo.html
Could I heat a coil kit with the burners instead? I'm under a redwood tree
Sure! You could loop copper coil through a burn barrel type set up. 55 gallon oil drum would likely be overkill but something a bit smaller might work well. I would likely introduce a small pump to move the water through the copper coil setup...might not actually be needed though. Anyone have experience with this that could comment on this?
Setting up one to use wood or cardboard as fuel. I wonder how long it will last til a leak is in effect. But hey cheap. and expensive spas dont last as well
I like that idea. Mine has lasted several years at this point. I suspect that at some point the bottom will give out in some way.
Great idea i will make one next winter
Excellent! I'm glad that you were inspired to do one of these based on my video. Much appreciated.
Great information so pretty.
Thanks! Yes, it's a fun thing to have access to and to use. Are you thinking of putting one together?
Do you understand what pressure treat would is soaked in
?
Nasty chemicals.
How long have you been using this? I'm concerned once the flame cooks off the zinc galvanizing the bottom will rust out.
I have had many a bath at this point. So far so good. Even if it started to leak now, I would say that I got my money's worth. I was concerned about this in the beginning as well...not an issue...yet. :)
yep. and fumes, very dangerous.
Yes, true. I mostly shut the burners down when it's hot enough and I get in. 75 gallons holds temp pretty well to take a 20-30min bath.
Would it work with just one burner and put a metal sheet above it to disperse the heat? I'm in the process of making one...
I suppose so. If exterior temp is not too cold that could work. It may take quite a bit longer for the water to heat up. I can heat 75 gallons of water to bath temp in about 35-45 minutes with my set up. Single burner runs the risk of not getting to the desired temp I suppose. Worth a try.
Is it galvanized
Yes it is.
Any damage to the bottom or your tank over time from the fire?
I was afraid of that too. The bottom of the tank isn't very thick gauge. So far so good though. No issues a few years into it at this point. Are you thinking of making one of these?
@@TinyIndustrial I have two. One tank at my farm is off grid, I put a copper coil that connects to the tank and sits over a fire pit.
I also am putting one in the back yard of my house, I can fill up with hot water but I was thinking a small propane burner installed underneath could keep it warm for long time. I just don’t want to ruin the tub. Thought of putting additional metal plate underneath
@@matthewgoetter3127 reinforcing the bottom might be a good idea. Sounds like a good project.
@@chrisschapdick1257 I’ve got some extra stone tiles, and metal roofing scraps, but I think a well ventilated cinder block base is good enough.
@@matthewgoetter3127 I see. Yeah, that will likely do it.
Interesting. I’ve never seen it done that way.
Cool. Glad it gave you a new perspective. You planning on building one of these?
I might not do exactly the same way , just because I don’t want to mess with the propane . But yeah it’s pretty tempting.
Pool noodle is brilliant.
Thanks! Makes it more comfortable. Have you built one of these?
@@TinyIndustrial I think I am going to go the Rubbermaid route, with an inflatable hot tub power pack. Pool noodle idea will enhance it as well!
Did you do this project? How did it work out?
Amazing
Thanks! Glad you like it as much as I do. :)
very nice dad
Super nice. :)
So basically you built a huge witch 🎉 cauldron to cook humans in the woods.😅
But kidding aside it came out nice 👍I'll be building one myself with the copper coil and wood just to be safer.
The pool noodle is a good idea for comfort too.
That's right. I would not want to fall asleep in there with the burners turned all the way up. Yeah the pool noodle was a good move.
Looks like a Medieval torture.
Not at all. Bathing under the stars in a warm tub surrounded by snow and ice is something that I wish more people could experience.
pressure treated lumber has pretty gnarly chemicals.
That's why I put so little of it in there. Agreed. Don't drink the water.
ha,,the least of his worries,, I luv a crazy man hot tub,,,
@@stevenstadterman9725 yeah, that’s right! Least of my worries!
Pressure treated wood not good for the human balls
That’s why I dilute it with 75 gallons of water for each bath. Yes, you are right. May swap that out one of these days.
Pressure treated is a bad idea. You're soaking in all those chemicals
It's just the lower two rails. I hear you. Kept the use to a minimum.
Heating water in a galvinzed tub is no problem. You only get fumes or chemical leaching when you go to the molting stage of metal. Which is something you wont get from heating a tub of water. Its called science
It’s like a witch’s cauldron
Indeed. Lobster pot.
Moonshine Undercover
It's a covert still.
I don't see the point of doing this without a tank you can STRETCH YOUR LEGS OUT!
You can spend more on a bigger tank if you want/need the leg room. That will take longer to heat up though and will use more fuel...plus the tank will cost more to buy. This size tank is fine for me. Sound like you would prefer a bigger one. Mine is the 100 gallon version I believe.
@@TinyIndustrial I'm 6'3" and if I can't stretch out in it, there's no reason to buy one. I wouldn't use it daily. It would be my one man hot tube. It's for my health.
@@Hooverdarnit I’m 6’3” as well. I hear your point though. I guess get a longer tub. They make them. Tractor supply.