100 percent agreed. I own it and I feel the performance mod definitely has a lot of thrashy vibes and Eco mod helps that problem by making the throttle response linear.
Thanks for the review. A little tip to remove and install grips ,use a compressed air duster ,push it under the grip, and apply a short shot of air.The grip will come straight off.
The Uk motorway speed is right into the sweet spot for max vibrations … renders the mirrors useless and makes the benefit of the extra cruising speed redundant sadly. Always value your content. Ride safe.
Can a full header pipe like the AEW or a half Catcon pipe from speedmonks or Way2speed help the vibrations from this engine especially just above 4-5k RPM??
Hi Ben, I am looking to purchase this. Has this helped with damping buzz and vibrations after your usage since installation? Would like to hear your thoughts!
They are good. Have used them for the last 15K kms on my Duke. They have reduced buzz by a good bit. Only concern with them was the material they are made of. Easily gets soaked and dirty and then gets a little hard. Also, mine seems to be tearing a bit after only a year of usage. I would want to try Spidergrips next.
30% reduction in FELT ( subjective ) vibrations . That’s the point of the swap . It’s always either the scientific way or by feel ( experience matters )
@@ONTWOWHEELSBENoohh....well that's what I do most if the time, will be looking forward for your feedback of these bark Busters, tbhi purchase karunga😅....thanks brother.. cheers and keep riding
This is not reducing vibrations, just making you feel less of it. A pair of grip puppies/buddies will do the same. And to make a claim of 30% less is not based on verifiable data. Title is misleading.
REDUCING FELT vibrations is the claim . Also grip puppies are not grips suited for Indian hand measurements. The title says AT THE HANDLEBAR. Not misleading.
I noticed one thing with the 450 that in ECO mode there is less vibration in 1-4k rpm.. I mainly use it during city rides!
+1 on that - the engine is much less viby, good for city
100 percent agreed. I own it and I feel the performance mod definitely has a lot of thrashy vibes and Eco mod helps that problem by making the throttle response linear.
Thanks for the review. A little tip to remove and install grips ,use a compressed air duster ,push it under the grip, and apply a short shot of air.The grip will come straight off.
@ontwowheelsben on 2:00 minute you said something about bars, may i know where to get a pair of those...
Okey, now the chai on the tank got me ben.. ❤
Which bike bar end is used ktm adv or other ktm bikes
The Uk motorway speed is right into the sweet spot for max vibrations … renders the mirrors useless and makes the benefit of the extra cruising speed redundant sadly. Always value your content. Ride safe.
❤️
Could try changing the rear sprocket.
Which bar end weight is used on this handle bar?
Can a full header pipe like the AEW or a half Catcon pipe from speedmonks or Way2speed help the vibrations from this engine especially just above 4-5k RPM??
@@aakashsandhu2165 no
I can see you have added karega shocker gaurd.. have you made a video on that??
Yet to
Is it Barkbuster or other brand? Links point to other brand
where can i get the bar end weights tho??
Hi Ben,
I am looking to purchase this. Has this helped with damping buzz and vibrations after your usage since installation?
Would like to hear your thoughts!
Yes about 30% .
Been using Barkbuster grips on my Himalayan 411. Better than stock grips and comfort
It fits nicely or needs to chop down the right plastic below the grip?
@@qu_0001 no need to chop. Fits correctly.
Does it last?
@@ananthakrishnanks4389 Yes. depends on how you use
@@ugendar for normal commuters will it last like normal grips since it is of rubber material
Sir, can u make video for handbar ,,
My handle bar twist again n again during off-road.
Nothing can be done about it . Increase the torque on the bolts holding the bar clamps . Go 90-100 NM .
Handlebar vibrations are not as much of an issue for me as much as those coming from the footpegs esp at 5500rpm. Any solutions for that?
Better silicone dampeners to be used in the foot peg brackets . Will experiment soon and make a video
Do u think we can swap the handlebar of 450 with the 411's?
Not without spacers ( adapters )
What's one mans buzz is another mans vibration and vice versa. Very subjective.
can I use this on new j series bullet 350??
absolutely.
@@ONTWOWHEELSBENthank you ❤
What about grip puppies ?
They are good. Have used them for the last 15K kms on my Duke.
They have reduced buzz by a good bit.
Only concern with them was the material they are made of.
Easily gets soaked and dirty and then gets a little hard.
Also, mine seems to be tearing a bit after only a year of usage.
I would want to try Spidergrips next.
Never if you intend to ever go off road .
How do you quantify vibrations?
30% reduction in FELT ( subjective ) vibrations . That’s the point of the swap . It’s always either the scientific way or by feel ( experience matters )
Can this be used for Himalayan 411?
Yes
Thanks for the tips mate jimmy Aust
Glad that it helped
Brother, Grip puppies or these?
Bro grip puppies will reduce vibration but u cannot use it with gloves 😢
thanks for useful feedback brother, but why so?... perticular issue with grip puppies only?
@@HSsharma37 Off course you can use it with gloves, in most countries in europe we use always gloves for safety and grip puppies are very popular
Never if you ever intend to go off road
@@ONTWOWHEELSBENoohh....well that's what I do most if the time, will be looking forward for your feedback of these bark Busters, tbhi purchase karunga😅....thanks brother.. cheers and keep riding
can this be used in 411 (2020 model ) !!!
Yes
Does this work on OG Himalayan?
Yes
Very good information👍👍👍
Does this fit 411?
Yes
Brother Is there any planning to install exhaust? Waiting for that💀
Soon 😁
Use barkbusters handguards also
Soon
does adding a high density rubber pad in between the handle bar mounts and handle bar risers, reduce the vibrations on handle ?
Elastomer . Hard to get in India
Ahh ...h....ahh...ahhh......with good information❤
Keeping it real .
nice!
30 percent Kam vibration Bhai mere kuch bhi 😂
Pahle istemal kare, fir vishwas kare 😅
This is not reducing vibrations, just making you feel less of it. A pair of grip puppies/buddies will do the same. And to make a claim of 30% less is not based on verifiable data. Title is misleading.
REDUCING FELT vibrations is the claim . Also grip puppies are not grips suited for Indian hand measurements. The title says AT THE HANDLEBAR. Not misleading.
@@ONTWOWHEELSBEN rightly said bro.