@@motion_mx I know it’s been a few years, but any chance that you have the part numbers that you used I would like to send my crank to millennium as well been holding onto the bike forever
Use a flywheel puller. Most bike shops sell them. Best place to buy is from Rocky Mountain ATV MC. Plug in your bike info and it’ll show you which one you’ll need!
Would you say this is a job that could be done by someone (me) who has to watch videos or do research on basics, like oil changes? Afraid to get in there and ruin something, but want to learn
@@Ryan.fromWA You will be able to, give it a try. Take lots of picture while youre taking apart and you'll be ok. If it's your first time ask someone to do it with you. You may want to atleast get a crank puller and a case splitter to make things go smoothly. You will also need a flywheel puller.
@@motion_mx Thanks man, I think I will do that. Do you have an affiliate link with Amazon I can buy those on? Anything in particular I should look for when I rebuild? I lost a drain bolt at high speed and locked the engine up. Got her started with a bump start after new plug and oil but losing oil and its a hard start. Thanks man!
Damn these engines are complicated!!! Nice work man. You got yourself a new subscriber
Thank you! Stay tuned
Keep up the good work!
Thanks!
What goes on the kick starting gear wire to keep it in place
Nice vid man!!!
Thank you!
How much would you charge if I shipped you the engine?
Awesome! Appreciate you
Want to do mine
Fuck yeah
Where did you get the rebuild I can’t find one
I had the OEM crank rebuilt by Millennium Technologies and bought new OEM crank bearings. Japan stopped making these cranks for these engines
@@motion_mx how much did it cost you
@@jeremiahhamilton3140 about $200 for millenniums work, about $100 for a connecting rod, and bearings are around $50 each.
@@motion_mx I know it’s been a few years, but any chance that you have the part numbers that you used I would like to send my crank to millennium as well been holding onto the bike forever
How can I get you to rebuild mine. I have the same motor 2002 yz426f
1:09 what tool are you using to get that cover off im going through hell trying to pry mines off with a flat head
Use a flywheel puller. Most bike shops sell them. Best place to buy is from Rocky Mountain ATV MC. Plug in your bike info and it’ll show you which one you’ll need!
Where you located?
A good video, music is to load though
I have the same bike with same problem, how much you charge? Lol
I charge up to $500 just depending what needs done (For engine rebuilds)
Where are you based out of?
Northern Indiana
Would you say this is a job that could be done by someone (me) who has to watch videos or do research on basics, like oil changes? Afraid to get in there and ruin something, but want to learn
@@Ryan.fromWA You will be able to, give it a try. Take lots of picture while youre taking apart and you'll be ok. If it's your first time ask someone to do it with you. You may want to atleast get a crank puller and a case splitter to make things go smoothly. You will also need a flywheel puller.
@@motion_mx Thanks man, I think I will do that. Do you have an affiliate link with Amazon I can buy those on? Anything in particular I should look for when I rebuild? I lost a drain bolt at high speed and locked the engine up. Got her started with a bump start after new plug and oil but losing oil and its a hard start. Thanks man!
@@Ryan.fromWA I buy most of my tolls on RockymountainATVmc.com
If you search "case splitter" and "crank puller" it'll pop up