Vyper Colour Change At Exact Layer

If you have Octoprint, pronterface or dodgy firmware you can use pause at height in Cura to pause the print and change filament then resume..
If you dont have the above, then you can still do it with a very, very easy gcode edit that will take a couple of minutes.
Watch the vid for details, and if you want to just copy and paste the codes then just paste in this to the layer you want an alert on..
M300 S400 P300
M300 S450 P300
M300 S500 P300
M300 S450 P300
M300 S400 P300
As always.. Enjoy the show..

[@theedge9174]

Thanks for this! Very informative and easy to understand. Oh and i see the cat was offering his 2 cents as well :)

[@houditv]

Thank for the tip.

[@aGamerUnleashed]

Great guide!

[@rueben68]

WoW this is super simple THANK YOU!!!!

[@radsan3006]

I can't thank you enough for giving the best alternative method I've seen so far, not to mention, the only one that actually worked! I did have one small issue though. Although I was very impressed with how you couldn't even see any line where it had continued on yours, mine you could. Would you have any idea why that might be happening? If not, it's cool, I'll just deal with it.

[@ryanw9667]

Thank you! Well explained

[@stambdw]

Good and informative video - great job

[@trevorrobinson3024]

With the G-code in the description, can I insert it into the custom G-code slot where it says pause at layer height? (Prusaslicer)

[@anthonybarton4252]

Very helpful. Thank you.

[@dogbite1429]

Might I inquire, what spool system are you using? Also great video and tip.

[@tysonpeltz1000]

When I heard the tones and hit pause the printer stopped and is frozen with "Paused, waiting for cache command to complete" Can't do anything now. Have to turn off and back on to regain functionality.

[@francisco270989]

thanks man

[@elektrofil]

Nice! Couldnt you use the modify G-code command in Cura, to add a scripted pause in the print, with no need for a manual pause?

[@Bigboler]

Thanks, I was wondering if there was an easy way to do this

[@Dangrousdave20]

Awesome thankyou for posting this! So putting in some g code, say, a G1 X20 Y20 wouldn't at least send the print head out of the way for you? It would it mess up the pause altogether?

[@xTheWeissBrot]

Could you also change the G-Code instead of making it play the tone, to write M226 to pause the print?

[@heinzgitz66]

Just 3D Printing, you Live in Switzerland German?

[@Pef273]

Too bad that none of the pause codes work on the Vyper. Beep is okay if you are going to be monitoring the printer for the whole print.