I just got mine put together this morning. Cnt get it to start. Pulled til my arm fell off. Got a better plug. Herd stock is junk. Will try gain tomorrow. Got the mill too.
Yes , Kyle it does say 50 to 1 ratio on page 25 . If you look at the very back of the manual and on the web page where it is sold it says 25 to 1. Whats up with that?
I bought the saw, Instructions are really bad, I got most of my information from you I Did some free hand ripping, made a couple of wheel barrels full of sawdust. It uses a lot of gas. Maybe half gallon tank? Also it is too heavy for free hand ripping. I need to get a milling attachment. Big problem with me is starting it. Doesnt want to start and wants to rip my arm off when it fires. Can you suggest anything to make it start easier?
@@KyleHallwoodworker yep sure do. We put a new spark plug wire on it and i ordered a new coil. See if that works. It doesnt fire with ether so sounds like spark thing. Thanks for the reply.
I have a ms 660 clone and love it. Im wanting this one you are showing as my next one
Good delivery with your video.I got mine. Happy happy.
Now that you used the saw for a while what do you think?
I think its worth it all day. I'd get another if needed
I'm thinking about buying one of these or a G660 as a secondary milling saw.
For the price why not ! I have link in the description you can follow if you decide to . I get a little kickback for the sale
I just got mine put together this morning. Cnt get it to start. Pulled til my arm fell off. Got a better plug. Herd stock is junk. Will try gain tomorrow. Got the mill too.
Find the NGK that fits
@KyleHallwoodworker i did...so the shop guy says. Ill find out in a few hours if he right. Thanks
New plug worked. Greesed the bearing too. All running. Thank you for the help.
Does it have regime for work in cold conditions?
Where do I buy that saw!? Thanks
I have shared a link in the description of the video .
Amazon for a 650$ bill
Where the hell did you get the blade? Im losing my mind trying to find one.😢
This is straight from Holzfforma. Should be a link in the description
I bought mine on ebay with 48 bar included
Yes , Kyle it does say 50 to 1 ratio on page 25 . If you look at the very back of the manual and on the web page where it is sold it says 25 to 1. Whats up with that?
Typical 2 stroke needs to get to temp so cylinder and rings can expand and get seated ....needs to be heat cycled for few tanks
I bought the saw,
Instructions are really bad,
I got most of my information from you
I Did some free hand ripping, made a couple of wheel barrels full of sawdust. It uses a lot of gas. Maybe half gallon tank?
Also it is too heavy for free hand ripping. I need to get a milling attachment.
Big problem with me is starting it.
Doesnt want to start and wants to rip my arm off when it fires.
Can you suggest anything to make it start easier?
Do you push the compression releases valve in when starting?
@@KyleHallwoodworker yep sure do.
We put a new spark plug wire on it and i ordered a new coil. See if that works. It doesnt fire with ether so sounds like spark thing.
Thanks for the reply.
@@jbird6609 jeez I have read you can replace parts with oem Stihl parts from the 880 . I searched on it a little more though
@@KyleHallwoodworker yep,
People told me it looks like a stihl,
The coil i ordered is for an 880.
Supposed to be in next week.
Bye for now
I gotta have one!!!!
It’s a beast !
I put a link in the description you can purchase through
32 : 1 ?????
And the manual says 50 : 1 ???
I’m running 50:1 in it as of now
Those saws looks good..but they just seem to fall apart.
.they won't hold up .not very good tolerances
you have my like and my subscription. g888 is an animal, but don't work with her right away. let it run for at least 30 minutes without gas.💪💪💪💪💪
I just got one, this things no joke.
@@bluntman99999
👍👍👍👍👍
you have g888
Plastic says it all