FIX LEAKING TOILET FILL VALVE - QUICK & EASY - LESS THAN 1 MIN
ฝัง
- เผยแพร่เมื่อ 13 พ.ค. 2021
- FIX LEAKING TOILET FILL VALVE - QUICK & EASY - LESS THAN 1 MIN
If you have a FLUIDMASTER toilet fill valve and it is leaking, you need to watch this video.
I have replace 10+ of these fluidmaster 400A fill valve and I can now do it under 1 minute.
This video will show you exactly how to remove, replace and fix your toilet fill valve leaking issue.
If you need to buy the Fluidmaster 400A fill valve - please use my link:
✅ ✅ 🔥 amzn.to/3njzemG
Thank you for watching. Please "LIKE" and "SUBSCRIBE"
#fillvalveleak #fluidmaster400a #toiletleak - แนวปฏิบัติและการใช้ชีวิต
If you need to buy the Fluidmaster 400A fill valve - please use my link:
✅ ✅ 🔥 amzn.to/3njzemG
Thanks
Just what I needed! Didn't want no dragged out video. I was done in a couple minutes flat, including water level adjustment. Thank you sir!
I had a running toilet & bought this Inlet Valve. When I got to work on it, I couldn't unscrew the white nut under the cistern as the plastic of the toilet seat was wedged into the nut, so I gave up and called a plumber who quoted me $475 plus tax. Yours is the only video (which I just found after a week of trawling YT) that replaces the Inlet Valve by leaving the bottom half of itin place. So tomorrow I'm going to see if it works.
Thank you for this! I was able to fix the toilet in 5 minutes much appreciated.
Such a time saver to only replace the top. Quick fix!
OMG this saved me money not to have to pay a plumber to fix my toilet. Thank you!😊
I wish I would have seen this before replacing mine. It wasn’t leaking but now it is!
Exactly!!! How do I stop the leak???
Good video.. Thank you
Thank you..I fixed it
If "leaking" means the fill valve is not shutting off, first thing to try is replace the small rubber fill valve seal, Fluidmaster part number 242, that is underneath the top cap on the valve assembly. Sometimes, just removing the cap and cleaning this seal and flushing out the valve solves the leaking problem. Even a small grain of sand can prevent the seal from shutting off the valve properly, thus the leak often accompanied by the hissing sound. The rubber seal deteriorates over time. Replacing or cleaning the seal is cheap and simple .. simpler than replacing the valve assembly.
That's where mine is leaking at the top.
Yep, he did not explain what he meant by the fill valve leaking. As you say, I think he meant the fill valve does not shut off when the water reached it's height in the water tank. Of course, if it doesn't stop filling the tank water will overflow over the top of that center overflow tube into the toilet and then you might call it leaking. Yes, that small rubber fill valve seal (under the gray cap in the original fill valve) is much cheaper and easy to remove. As I recall, you hold onto that arm and turn the gray cap just an 1/8" to the left is all it takes.
Does that rubber washer suppose have a pin hole through it?
Looks like the activating pin on lever went through it
@@richk3c
Wanna show me how?! Where’s your video?!
@@brendalu4665 He may not be a TH-camr with his own video channel. You really should appreciate that he's given you some advice to potentially safe some money by replacing a very cheap seal. There is a saying ""God helps those who help themselves". It is a motto that emphasizes the importance of self-initiative and agency. In this particular case, it means for you to help yourself by searching YT for "How to replace a fill valve seal". Unless, you like to wait and wait for the chance that the OP makes videos.
How can I know what fill valve I have? I have a floating Ball on the right side.
Title/description can be better. I need to fix leak from bottom of tank