well that depends upon where you are located sir, i am sure pc spare parts shops around you have them. Check here if it is available in your location. sparepartsonline.in/product-category/gaming/gaming-console-spare-parts/sony-ps4-spare-parts/ Or Search for "Thumbsticks" or "joystick" or try "Robu.in" they have spare parts of all kind.
Well if you are saying that the joystick is very loose and falling freely olin on/any direction. It could be a broken part inside the joystick module itself. Open the case to confirm if this is the reason, or not. If this is the reason, you can get a spare from old/similar joystick. Or you can buy one online (the module) and solder it on board.
i want to ask something in my computer game pad controller it the right sticks movements work as buttons for me not axis example when I move it right it give me button 3 same as If i pres O on the controller or when i move it down it give me button same as the x button so basically i wanna now that is there something i could do to fix this or my controller is broken or what
@@benjacob7674 well i have never seen or encountered a loose stick. I have some spares so i can figure out what is wrong with your sticks. But it will be even better if you can send me a video clip of loose stick. From inside gamepad. In mean time i'll disassemble spare stick to see what can go wrong.
R stick lossen and not getting tight even after this method Ill explain When i try to rotate That white part attached to motor it is loosen but l stick part is tight What should i do
Well , what i can understand from this is that, the mechanism inside the button itself that resets/pulls back the white lever when it is moved, is faulty. It could be broken or might have slipped from its place. You can either de-solder the button and open it to check. Or you can buy/replace (if any old unused gamepad available) with new one. You can get one easily from market/paytm mall/ other electronics stores online.
When I opened the loosed analog the white stick which is connected to the button is not acting like getting back to the middle or its position and the outer analog body is in okay condition. Any idea what to do. And I lost my R2 button rubber trying to reassemble the controller. Why is it so hard. And what is the best controller for pc if you want to suggest I might get a new one instead this broken one. Sorry for so many questions
If lever isn't going back to its position, it could be dust/carbon inside or the spring mechanism is broken. So you can try putting 1-2 patrol drops and move the lever around to test if it was dust. If it becomes more loose, it is broken. You can replace it if you know soldering. Replacement analog sticks easily available online.
If you have/had same or similar gamepad like this, these are not so good for long gaming sessions. I am using quantum qhm7468 gamepad. Not very expensive and built to last. Heavy, comfortable and good quality. If not this specific one, look for gamepads similar to these. ANT and Redgear have good ones too. It's hard to decide best ones. Best is always expensive. But quantum one is working great for me for few years now.
1. Does Device manager recognise the device when plugged in? 2. If device manager recognizes it and it is not working, try downloading its driver and reinstall them. Now Okei so, i assume the computer/Laptop doesn't recognizes the Gamepad when plugged in, no change in device manager.. Then Open the gamepad case. Unscrew the main board from gamepad. Plug in the cable and touch the Big black spot in the middle of gamepad motherboard. Let it be plugged in for a few minutes and keep touching black spot with finger and see if it just gets warm or a little hot, or it gets too hot to touch. If it is getting very hot to touch, the chip under it has gone bad and there is no solution or replacement. If it is just warm, or completely cold then comment again, we will try a few things.
That machine is the motor, it doesn't affect the gamepad. That motor is only useful if (in game setting) vibration is on. Like in wrestling games gamepad vibrates when player is hit by opponent. That's the only function of motor there.
Bro mine also quantum controller only but when I configure left analog stick and left direction pad configuration is coming same if I use left stick then direction Pad also acting how can I fix this
Is it happening in one game only or in all games? If in one game. Check the config file if same codes are applied to both pad and stick.? If in all games , it is driver issue. And check if cables are not interconnected or twisted.
@@GamingWormYT it's happening to all games and I don't driver CD so I can't check and also I have another problem a Month ago the controller was working fine but now it's not working my doesn't discover it was just fine with the with the previous problem but now my phone is not discovering it (i haven't used it in this 1 Month gap)
@@swathidamaraju2034 are you using it with only mobile? Or both with mobile and pc/laptop. if pc is detecting it and mobile isn't . And mobile charging port is fine, then Check OTG cable might be faulty or loose. If pc isn't detecting it too. 1. Try in different ports 2. Connect it, and uninstall its driver from device manager. (On next restart pc will install driver automatically. No cd required) 3. If you can open the gamepad, clean it with patrol/spirit and check for any loose connecting cable. 4. Gamepad has a microchip in the middle of board. Open the gamepad, connect its cable to pc, and put ur finger on that microchip (on round black spot) . If it getting too hot to touch in under one to two minutes. It is faulty chip and gamepad can't be repaired. Let me know if it helps or needs more working.
@@GamingWormYT PC detects it but phone doesn't but it's is fine but actually this problem occured when It was new I Forced my mom to buy it but when it arrived it was already had the button configuration prob I want to tell my mom buy I don't want to upset her so I didn't use then my mom asked why I not using it so I told her and then she fixed it by twisting the USB to the wire and taped then it worked for both PC and phone but now it's not working for phone 🙁🙁 I don't want to upset her
@@swathidamaraju2034 check the otg then. If gamepad is working on pc, it has no issue. Try restarting phone while gamepad is connected. Try clearing cache/ temporary files . But i am sure it could be otg issue. Check and pendrive with otg. (Pendrive ahould be fat32 format for phone to access it).
If that is broken then you can buy an identical one (online or from shops nearby) desolder the old one and solder the new one. If you can't solder at home. Take it to any electronics repair shop and get it done. 👍
@Yash Paritkar you can try putting 1-2 drops of machine oil or patrol and it will remove any dust or carbon stick inside it. That part is called Analog stick or analog thumb stick. Just google pc gamepad analog stick. If buying new.. make sure its for pc gamepad and not xbox/ps one. And it is X&Y axis supported, and match number of pins with previous one. 👍
3 number, on right side i assume. If it isn't popping back up to its position and just staying loose and down. The rubber inside has slipped away. Open it carefully (always keep the button side facing floor, or the rubbers and buttons will scatter. Or it could be that button is pressed and rotated. This puts its locks in different positions and doesn't allow button to move. Not a big problem. Can be easily fixed. Open it top side facing down. Keep it that way and put the rubber back to its place. Or if button locks are rotated fix it back to its position. Fix it back and all good. Happened to me many times.
Hey I have buyed the new controller But my mom has put it down on water by mistakely I have put that in rice it fix well it was working but when I press the analog I have to put lot of effort on my fingers to Flash analog Red how to fix that
@@kislaykhan942 what? 😛 Ok, if you ask me. I'd open it and clean it dry of any drop of water inside. Water can damage any electronics device even a little bit. Clean the board, rubber, plastic everything. That's my suggestion.
bro i have same problem my left stick is loosed 2 times i waste my money for buying new joystick two but iam confused cuz i have a different company joystick, i have a lanjue sirius joystick and i dont know will this method work on this gamepad if u know
If you can open the gamepad and send me picture , then i can tell you. Besides if they are using same or similar rotational stics. It will definately work. Mail@ exactlyhowto@gmail
There are only 3 possible issues , Corrupt Driver - try installing from cd or internet. Broken or loose cables- can break from inside gamepad or in the insulated coating of wire (you can check with multimeter beep/short). Damaged IC- inside gamepad, motherboard has a controlling chip in the middle. If upon connecting cable to USB port it gets very very hot and you can't place a finger on it more than 1-2 seconds. The chip is burnt and there is no recovery for that. Piece ia all dead. I hope it helps.
Hello everyone, when i plug my usb gamepad it tells me that it's not recognized and i tried it on many computers aand same result, so it's loose do guys you think this method will solve my usb gamepad ?
The only thing you can check is any fault in cable of gamepad. If it is soldered well in board inside and not broken, it is possible that microchip on board is fried. If availavle you can try replacing whole usb cable with same number of cables inside and wire colors. Or try finding gamepad drivers and install them. Otherwise it is dead.
bro mera joypad kharab ho gaya tha toh maine use khola toh muje 4 wires (black,green,white,red) wire tute hue mile. Unke holes me GND, 5V, +, - likha hai. konsa wire kisme solder karu? Plz reply ASAP mai joystick kholke baitha hu xD Edit- GND me black solder kiya, 5v me red, + me white, - me green solder kiya aab gamepad connect ho raha hai but USB device not recognised dikha raha hai.
@@bhavi1266 you can find them online, just use gamepad drivers Or sometimes they install automatically with latest windows. Just plug in gamepad., in device manager lookup gamepad/joystick right click and uninstall. Unplug gamepad, if you have CCleaner, clear registry errors, restart windows. Plug in gamepad. It will install automatically. It mostly is driver issue or virus/malware.
Mostly it happens with either corrupt driver or some dirt/carbon stuck in joy stick. Try to use gamepad in some other pc/laptop if problem persists issue is in joystick if it works fine on other system , then issue is in your system driver. Driver issue can be simply solved. Plug in gamepad, go to device manager, uninstall USB gamepad driver . Unplug gamepad, restart system, plug in gamepad again and it will work fine.
Same joystick same problem... But your solution is dumb for me... I was excited to see fixing that 400rs stick now its 600rs.. Thank you wasting my time... That analog stick is broken for me soldering and replace is permanent choice...
Round thing? If you are asking about that orange pipe. It was actually a Ball pen's Cap. Cap which covers the pionty tip side of ball pen. You can use anything that can fit on those joystick holding pipes in thumb rotators. A cap or pipe or a strong straw. Just make sure it doesnot breaks easily and is flexible. It should not be too loose or too tight, just have to fit on that part.
No. Don't cut them. We don't need to cut them. Just measure the length of plastic pipe from top to until the four side lines. Usually it is almost 2 to 4 centemeters . that's the length of cap we need. Don't cut or break anything on thumb rotator.
Depends upon usage . Games with high intensity requires analog stick usage more often so there are good enough chances that it will break again and again. AND to apply fevikwik you have to unscrew it anyway so why not fix it permanently. Just one more step and it is fixed for long time. In my experience using only fevikwik might last 1 day to one month at max. Until u use it very slowly and carefully. After that fix mine is working fine till date. 👍
I won't recommend glue gun. Hot glue is thick and can get stuck in the hole where analog stick is placed. Which will cause problem in functionality of stick movement. It can be used on outside of stick holder (the cylindrical pipe) but not to fix a broken one.
Is it working or not? And by "moving by itself” you mean it moves by itself physically or in games? If it is moving by itself physically, on gamepad, (like falling towards a specific direction or any direction) it is possible that levers inside joystick box are broken. You might need to replace the joystick box. Although it is possible that it is just the top thumb rotator plastic that is broken, that can be checked by opening the gamepad. Please send a small video clip of issue for better understanding to exactlyhowto@gmail.com. (of joystick moving by itself).
@@aaroncasingal4600 have you tried to reinstall driver or test gamepad on some other computer? May be on a friend's system? It could be a malfunctioned driver i think it had happened to me once and reinstalling drivers fixed it. If it does the same on their system, it could be some carbon dust stuck inside rotator so if possible open gamepad and pour some drops of patrol in it and keep rotating the stick around. Pour more drops and rotate more. That will clean the connectors inside and fix this accidental connection between them. But firstly try on some other system, it might save you a lot of time.
these gamepads usually start wearing out after one year. if u are regular gamer, use a better quality game pad. i am using a better model of quantum now.
@@hooda577 gamepads usually have 4cuts screws. These screwdrivers are common. If you don't have that one, ask around in neighbourhood or buy from market if you are gonna use it frequently.
hi, go to gamepad-tester.com/ and then connect your gamepad and when site shows it's connected. press keys to check which one are working properly and which require to push hard. if R2 isn't responding there, open gamepad and clean Board circuit under R2 with Thinner or Patrol. clean the Rubber under button for any dust particles with cloth (Or change rubber with any old or extra gamepad available). Check for any loose or broken cable, that might need soldering. Comment if that helped or you need more help.
![[XBOX360 ] HOW TO FIX WIRED CONTROLLER CABLE](http://i.ytimg.com/vi/2IvLv1PvLr0/mqdefault.jpg)
![[XBOX360 ] HOW TO FIX WIRED CONTROLLER CABLE](/img/tr.png)
can tell me there plastic analog where can buy?!
well that depends upon where you are located sir, i am sure pc spare parts shops around you have them.
Check here if it is available in your location.
sparepartsonline.in/product-category/gaming/gaming-console-spare-parts/sony-ps4-spare-parts/
Or Search for "Thumbsticks" or "joystick"
or try "Robu.in" they have spare parts of all kind.
On my case, the gyroscopic thing that hold the plastic is not holding the joystick in place. How can i fix it?
Well if you are saying that the joystick is very loose and falling freely olin on/any direction. It could be a broken part inside the joystick module itself.
Open the case to confirm if this is the reason, or not.
If this is the reason, you can get a spare from old/similar joystick. Or you can buy one online (the module) and solder it on board.
@@GamingWormYTi have checked it and yeah, i think the problem is in the joystick module itself. Thank you for the information man 🤠🤠
i want to ask something
in my computer game pad controller it the right sticks movements work as buttons for me not axis
example when I move it right it give me button 3 same as If i pres O on the controller or when i move it down it give me button same as the x button
so basically i wanna now that is there something i could do to fix this or my controller is broken or what
Does that happens for any one specific game or for all games?
Thanks... that solved my joystick breaking again and again..
Welcome.. happy to hear that.. :)
@@GamingWormYT yep his controller got destroy bc of tutorial maybe
Bro my analog is okk. But it is loosed.(white bar). What to do. Can u help me.
Bro how to apply the feviquik around the white bar stick .??
white bar? the only thing white there is analog stick itself. the plastic stick in the middle of rotator. is that what u mean?
@@GamingWormYT yes bro i meant that can u please help ??
@@GamingWormYTi am in the middle of a game bro and i cant play with loosen analogs (now both have have loosed). Waiting for ur reply.
@@benjacob7674 well i have never seen or encountered a loose stick. I have some spares so i can figure out what is wrong with your sticks. But it will be even better if you can send me a video clip of loose stick. From inside gamepad. In mean time i'll disassemble spare stick to see what can go wrong.
R stick lossen and not getting tight even after this method
Ill explain
When i try to rotate That white part attached to motor it is loosen but l stick part is tight
What should i do
Well , what i can understand from this is that, the mechanism inside the button itself that resets/pulls back the white lever when it is moved, is faulty. It could be broken or might have slipped from its place.
You can either de-solder the button and open it to check. Or you can buy/replace (if any old unused gamepad available) with new one. You can get one easily from market/paytm mall/ other electronics stores online.
@@GamingWormYT this will be appreciated
Thank you for giving me an elaborate response 💥💥💥
@@HarishKarthikeyan-ib5px you are welcome..
When I opened the loosed analog the white stick which is connected to the button is not acting like getting back to the middle or its position and the outer analog body is in okay condition. Any idea what to do. And I lost my R2 button rubber trying to reassemble the controller. Why is it so hard. And what is the best controller for pc if you want to suggest I might get a new one instead this broken one. Sorry for so many questions
If lever isn't going back to its position, it could be dust/carbon inside or the spring mechanism is broken. So you can try putting 1-2 patrol drops and move the lever around to test if it was dust. If it becomes more loose, it is broken.
You can replace it if you know soldering.
Replacement analog sticks easily available online.
If you have/had same or similar gamepad like this, these are not so good for long gaming sessions. I am using quantum qhm7468 gamepad. Not very expensive and built to last. Heavy, comfortable and good quality.
If not this specific one, look for gamepads similar to these. ANT and Redgear have good ones too.
It's hard to decide best ones. Best is always expensive. But quantum one is working great for me for few years now.
Bro my gamepad is not working and i cant see any loose wires or broken parts . Its not working.any solution
Plz help
1. Does Device manager recognise the device when plugged in?
2. If device manager recognizes it and it is not working, try downloading its driver and reinstall them.
Now
Okei so, i assume the computer/Laptop doesn't recognizes the Gamepad when plugged in, no change in device manager..
Then Open the gamepad case. Unscrew the main board from gamepad.
Plug in the cable and touch the Big black spot in the middle of gamepad motherboard. Let it be plugged in for a few minutes and keep touching black spot with finger and see if it just gets warm or a little hot, or it gets too hot to touch.
If it is getting very hot to touch, the chip under it has gone bad and there is no solution or replacement.
If it is just warm, or completely cold then comment again, we will try a few things.
@@GamingWormYT thx for reply . i will check and say
@@1.3klike36 okey
@@GamingWormYT its not getting hot
I accidentally removed that round machine that spin that's on the side of the pad hope I haven't distroyed the pad that black machine
That machine is the motor, it doesn't affect the gamepad. That motor is only useful if (in game setting) vibration is on. Like in wrestling games gamepad vibrates when player is hit by opponent. That's the only function of motor there.
@@GamingWormYT ooooohhhhh yeah why didn't I think of that😅 I notice vibration was gone your really good at this
@@Maphip 😄 its just 2 wires. You can solder it or get it soldered from any electronics repair shop. 👍
@@GamingWormYT I don't think I want it back because it add to my pressure when I am loosing like when it hits the post
@@Maphip 😂.. yes. I keep it off too. Makes the controller unstable..
Hi bro , my Gamepad is not Working too , Right Analog stick works invert ( Anticlockwise) , r1, r2 ,l1 ,l2 , right 4 buttons not working any solution
Please how can i separate twin game pad
Please tell me if youve found a solution
Please provide more detail with make and model etc.
Great and simple fix, exactly what I needed. I'll try that. Thanks!
Can i change the whole button i have tools and experience my main button broke not cap
Yes you can.. easily . They are mostly available at electronics stores.
Bro mine also quantum controller only but when I configure left analog stick and left direction pad configuration is coming same if I use left stick then direction Pad also acting how can I fix this
Is it happening in one game only or in all games?
If in one game. Check the config file if same codes are applied to both pad and stick.?
If in all games , it is driver issue.
And check if cables are not interconnected or twisted.
@@GamingWormYT it's happening to all games and I don't driver CD so I can't check and also I have another problem a Month ago the controller was working fine but now it's not working my doesn't discover it was just fine with the with the previous problem but now my phone is not discovering it (i haven't used it in this 1 Month gap)
@@swathidamaraju2034 are you using it with only mobile? Or both with mobile and pc/laptop.
if pc is detecting it and mobile isn't . And mobile charging port is fine, then Check OTG cable might be faulty or loose.
If pc isn't detecting it too.
1. Try in different ports
2. Connect it, and uninstall its driver from device manager. (On next restart pc will install driver automatically. No cd required)
3. If you can open the gamepad, clean it with patrol/spirit and check for any loose connecting cable.
4. Gamepad has a microchip in the middle of board. Open the gamepad, connect its cable to pc, and put ur finger on that microchip (on round black spot) .
If it getting too hot to touch in under one to two minutes. It is faulty chip and gamepad can't be repaired.
Let me know if it helps or needs more working.
@@GamingWormYT PC detects it but phone doesn't but it's is fine but actually this problem occured when It was new I
Forced my mom to buy it but when it arrived it was already had the button configuration prob I want to tell my mom buy I don't want to upset her so I didn't use then my mom asked why I not using it so I told her and then she fixed it by twisting the USB to the wire and taped then it worked for both PC and phone but now it's not working for phone 🙁🙁 I don't want to upset her
@@swathidamaraju2034 check the otg then. If gamepad is working on pc, it has no issue.
Try restarting phone while gamepad is connected. Try clearing cache/ temporary files .
But i am sure it could be otg issue. Check and pendrive with otg. (Pendrive ahould be fat32 format for phone to access it).
Thx bro..u saved my 500 bucks..
(: m happy for u.
What if the inside one is broken? The white one
If that is broken then you can buy an identical one (online or from shops nearby) desolder the old one and solder the new one.
If you can't solder at home. Take it to any electronics repair shop and get it done. 👍
@Yash Paritkar you can try putting 1-2 drops of machine oil or patrol and it will remove any dust or carbon stick inside it.
That part is called Analog stick or analog thumb stick. Just google pc gamepad analog stick.
If buying new.. make sure its for pc gamepad and not xbox/ps one. And it is X&Y axis supported, and match number of pins with previous one. 👍
How to fix my 3 number button I can't move it In gamepad I have also same gamepad
3 number, on right side i assume.
If it isn't popping back up to its position and just staying loose and down. The rubber inside has slipped away. Open it carefully (always keep the button side facing floor, or the rubbers and buttons will scatter.
Or it could be that button is pressed and rotated. This puts its locks in different positions and doesn't allow button to move. Not a big problem. Can be easily fixed.
Open it top side facing down. Keep it that way and put the rubber back to its place. Or if button locks are rotated fix it back to its position. Fix it back and all good.
Happened to me many times.
@@GamingWormYT sorry but I have buyed the new controller😔
Hey I have buyed the new controller
But my mom has put it down on water by mistakely I have put that in rice it fix well it was working but when I press the analog I have to put lot of effort on my fingers to Flash analog Red how to fix that
@@kislaykhan942 that's good too.. congratulations.
Keep the old one. Its parts can be handy.
And you can still fix it and have two working gamepads.
@@kislaykhan942 what? 😛
Ok, if you ask me. I'd open it and clean it dry of any drop of water inside. Water can damage any electronics device even a little bit. Clean the board, rubber, plastic everything. That's my suggestion.
bro i have same problem my left stick is loosed 2 times i waste my money for buying new joystick two but iam confused cuz i have a different company joystick, i have a lanjue sirius joystick and i dont know will this method work on this gamepad if u know
If you can open the gamepad and send me picture , then i can tell you. Besides if they are using same or similar rotational stics. It will definately work. Mail@ exactlyhowto@gmail
@@GamingWormYT bro i send u check the mail
its not working when i connect into laptop it say not recognised what to do
There are only 3 possible issues ,
Corrupt Driver - try installing from cd or internet.
Broken or loose cables- can break from inside gamepad or in the insulated coating of wire (you can check with multimeter beep/short).
Damaged IC- inside gamepad, motherboard has a controlling chip in the middle. If upon connecting cable to USB port it gets very very hot and you can't place a finger on it more than 1-2 seconds. The chip is burnt and there is no recovery for that. Piece ia all dead.
I hope it helps.
@@GamingWormYT I try to change wire but still not working
@@dhruv.maheshwari. what about driver and IC?
@@GamingWormYT yes i did reinstall driver and ic no heating i dont know what happend
@@dhruv.maheshwari. check cable connection with multimeter.
Hello everyone, when i plug my usb gamepad it tells me that it's not recognized and i tried it on many computers aand same result, so it's loose do guys you think this method will solve my usb gamepad ?
The only thing you can check is any fault in cable of gamepad. If it is soldered well in board inside and not broken, it is possible that microchip on board is fried.
If availavle you can try replacing whole usb cable with same number of cables inside and wire colors.
Or try finding gamepad drivers and install them.
Otherwise it is dead.
bro mera joypad kharab ho gaya tha toh maine use khola toh muje 4 wires (black,green,white,red) wire tute hue mile.
Unke holes me GND, 5V, +, - likha hai.
konsa wire kisme solder karu?
Plz reply ASAP mai joystick kholke baitha hu xD
Edit- GND me black solder kiya, 5v me red, + me white, - me green solder kiya
aab gamepad connect ho raha hai but USB device not recognised dikha raha hai.
Black is GND (ground), Red is 5V, White is -ve, Green is +ve.
Green + me rakho. Abhi power ja rha hai par data transfer nai ho rha. Switch green & white. Green to +, white to -.
bro i have the same controller but my both analog sticks move itself please help
Have you tried reinstalling drivers? And tested gamepad on some other pc/laptop?
@@GamingWormYT nope where can i find the drivers?
@@bhavi1266 you can find them online, just use gamepad drivers
Or sometimes they install automatically with latest windows.
Just plug in gamepad., in device manager lookup gamepad/joystick right click and uninstall. Unplug gamepad, if you have CCleaner, clear registry errors, restart windows. Plug in gamepad. It will install automatically.
It mostly is driver issue or virus/malware.
Please show power cable connection
Bro my left analog stick automatic up down what to do
Mostly it happens with either corrupt driver or some dirt/carbon stuck in joy stick.
Try to use gamepad in some other pc/laptop if problem persists issue is in joystick if it works fine on other system , then issue is in your system driver.
Driver issue can be simply solved.
Plug in gamepad, go to device manager, uninstall USB gamepad driver .
Unplug gamepad, restart system, plug in gamepad again and it will work fine.
Same joystick same problem...
But your solution is dumb for me...
I was excited to see fixing that 400rs stick now its 600rs..
Thank you wasting my time...
That analog stick is broken for me soldering and replace is permanent choice...
I lost part of shape please tell me solution how to use matches please fastly reply me ❤❤
Use some piece of plastic (cut in shape) in place of lost part and fix it. Then put a fitting cap on it with fast glue.
@@GamingWormYT my crontroller working itself also i clean it but same problem
What if button stuck?
Pour some drops of patrol in the joystick (inside the gamepad) and move the joystick around. It will get rid of any carbon or dust stuck inside.
How or where I could find that round thing man?
Round thing? If you are asking about that orange pipe. It was actually a Ball pen's Cap. Cap which covers the pionty tip side of ball pen. You can use anything that can fit on those joystick holding pipes in thumb rotators.
A cap or pipe or a strong straw. Just make sure it doesnot breaks easily and is flexible. It should not be too loose or too tight, just have to fit on that part.
@@GamingWormYT yeah got it but what about those four side on the circle , how to do it please explain I am poor guy no mouse or keyboard on these
@@GamingWormYT please tell me i would be helpful
@@GamingWormYT did you cut those four side lines on the circle
No. Don't cut them. We don't need to cut them. Just measure the length of plastic pipe from top to until the four side lines. Usually it is almost 2 to 4 centemeters . that's the length of cap we need. Don't cut or break anything on thumb rotator.
i have a loose joystick but your method does"t work for me,it work same as it was loose
Just make sure that the pipe of thumb rotator is complete in shape . if it is missing some part. It will remain loose until that part ia filled.
Great man !! 🙌🙏🏻
Thank you. !!
Joystick ke belt ko think karna sikhao
If u know soldering and have soldering equipments. Its super easy. I'll make a video on that. What's the actual issue with belt?
@@GamingWormYT belt choro mere gamepad ki ma bhen ho gyi 😢 help
Can i directly put fevikuik on analog and fix it
You surely can.. and i did too, multiple times. But after some days it breaks again. So using this method you can prevent breaking for long time.
@@GamingWormYT up till how much days analog works with direct fevikuik
Depends upon usage . Games with high intensity requires analog stick usage more often so there are good enough chances that it will break again and again. AND to apply fevikwik you have to unscrew it anyway so why not fix it permanently. Just one more step and it is fixed for long time. In my experience using only fevikwik might last 1 day to one month at max. Until u use it very slowly and carefully. After that fix mine is working fine till date. 👍
@@GamingWormYT with glue gun can i
I won't recommend glue gun. Hot glue is thick and can get stuck in the hole where analog stick is placed. Which will cause problem in functionality of stick movement. It can be used on outside of stick holder (the cylindrical pipe) but not to fix a broken one.
how can I Fix my joystick moving by itself?
Is it working or not? And by "moving by itself” you mean it moves by itself physically or in games? If it is moving by itself physically, on gamepad, (like falling towards a specific direction or any direction) it is possible that levers inside joystick box are broken. You might need to replace the joystick box.
Although it is possible that it is just the top thumb rotator plastic that is broken, that can be checked by opening the gamepad. Please send a small video clip of issue for better understanding to exactlyhowto@gmail.com. (of joystick moving by itself).
@@GamingWormYT It's working but the joystick is moving itself even if I Don't Move the Joystick. I'll gonna send clips of nba2k21
@@aaroncasingal4600 okei.. I'll take a look and reply again.
@@GamingWormYT What do you think is the problem?
@@aaroncasingal4600 have you tried to reinstall driver or test gamepad on some other computer? May be on a friend's system? It could be a malfunctioned driver i think it had happened to me once and reinstalling drivers fixed it.
If it does the same on their system, it could be some carbon dust stuck inside rotator so if possible open gamepad and pour some drops of patrol in it and keep rotating the stick around. Pour more drops and rotate more. That will clean the connectors inside and fix this accidental connection between them.
But firstly try on some other system, it might save you a lot of time.
Can superglue work
Yes , just make sure that broken pieces are well placed and superglue is completely dry before placing joystick in it.
Thnx same Gamepad 😄
these gamepads usually start wearing out after one year. if u are regular gamer, use a better quality game pad. i am using a better model of quantum now.
@@GamingWormYT which Model bro
@@GamingWormYT actually I couldn't Even open the Gamepad As I didn't Have fitting Screwdriver 😭😭
@@hooda577 Quantum QHM7487-2V C
I hv beeb using it for 3 years now. Just cleaned its circuits under buttons once or twice. Rest is working great.
@@hooda577 gamepads usually have 4cuts screws. These screwdrivers are common. If you don't have that one, ask around in neighbourhood or buy from market if you are gonna use it frequently.
Home tour
no probkem bro i have all this stuff at home
smh
First of all thank you for uploaded this vedio and my problem is my joystick R2 button is not working please help me.
hi, go to gamepad-tester.com/ and then connect your gamepad and when site shows it's connected. press keys to check which one are working properly and which require to push hard. if R2 isn't responding there, open gamepad and clean Board circuit under R2 with Thinner or Patrol. clean the Rubber under button for any dust particles with cloth (Or change rubber with any old or extra gamepad available).
Check for any loose or broken cable, that might need soldering.
Comment if that helped or you need more help.
The exact gamepad I have that you repair XD
Its a low quality one but does the job for few months. I am using a better one from same company Quantum.
@@GamingWormYT yeah i dont mind it
well done 👍 it works thanks ^_^
You're welcome! :)
Nice video 🔥
Bro , How to recalibrate Gamepad in Mobile.
nice
Thanks
loved it
Happy to help. (: