Great Video . I nver would have thought of checking those things . I will go chack my 80 for those issues tomorrow . Very well edited video and love the channel . Cheers !!
Thanks for the tips I’ll check out my 80 series. Otram also has a useful video on pre inspection on the 1fzfe which can be applied to all engines. Keep up the interesting videos.
Thank you for the info!! I had a 91 that I had to sell due to the amount of rust but mostly it was starting to nickel and dime me to death. Having said that these are things about 80 series I have never heard of except the rust to floor boards...guess how I know? Anyway I plan on purchasing another and I will be sure to check these out. Thanks again!
Excellent video. I have been putting up with a notchy 1st and 2nd gear for years but never bothered to mention it to my mechanic. I know so little about cars but watching videos like this helps me learn. Thank you!
I’m glad that you found this useful. If you wish to fix then itchy gears the gearbox will have to be taken out and striped dow. They will replace the first and second gear sincro ring. I took mine to a gearbox and diff place to get Thai done. Just a warning it’s not overly cheep as it is a big job.
I live in the United States and you all get all the good rigs down there. I have four different 80 Series from 1994-1997, but all petrol manuals:( Sadly, that is all we could get. No worries though, 350 small block chevy's end up in most rigs in the end. I thought I knew a lot about 80 Series, but you just shows me a bunch of new stuff I never checked. Thanx for the vid:)
Mine had a severe crack at the chassis where the steering box bolts go through the chassis but it was not visible due to all the mud and stuff caked all over the chassis from end to end, I only found out when I went to Pedders to see what the issue was with the steering after I had the roadworthy done and some other maintenance work done on it. I had it welded up and some plates made up, welded in place and an extra one also made and welded in place, that I found out about from a forum website talking about an extra plate going along the arm to further strengthen it up. It was a reasonably cheap fix due to a nice guy I found out about here in Werribee Melb that has done this to several other 80's as it is a common occurrence. It was all done for approx $500 which I was quite happy with and he even spray painted it and gave me a warranty with his job.
Hmmm, lots of good things I've never thought to check. Luckily, I bought mine stock and the guy never used it off road, and in a state where they don't salt the roads. So I got lucky on all of these things. I'm the U.S. also, so mines a LHD. Is yours a manual and diesel? That's sick.
Never heard of these issues before. On my way to check mine. Any chance those issues are more specific to 80s that have been wheeled really hard? Most of these issues would suggest it. Anyways, checking mine. Thanks!
Roland Rosso cracks are more prone in ones that have been off-road and or lifted. But sterling box crack is a known issue and there is a fix plate that can be welded in. I found all this out the hard way. So thought I would share
Now I got to ask...how do the crack in the steering part of the chassis happens.an the small bar that goes from one side to the other.an the cracked axle bit..well I may as well ask how does it all happen..
Xxxx Xxxx it’s usually in cars that have been used of road. To my understanding it’s just when certain forces are put on things they start to crack. The one on the radius mount is usually in lifted cars. So changed from Toyota’s original specs. The steering box one is a known fault from Toyota,
@@blackllama1 my son bought a 3 inch lifted Toyota from some cowboy..only went as far as 3 inch springs an shockies.so we've put 2 degree camber kit.adjustable panhard bars..bit more work to be done..
Xxxx Xxxx yer there is some cowboys out there. Would love to see a photo. If you are ok with doing this. post to black llama Facebook group. I only have. 2 inch lift in mine. I think that’s enough for me.
@@donny-ho1bm Yeah mine is the same.. only the springs n shocks were done and he had 35's on it... so I went down to 33's, there is no need to be that high for my use. I did all the same as you, camber kit, panhard bars, and extension sway bar arms, it all makes it ride better now.
I have a 96 lx 450 motor was tapping no one new what it was and oil leaks so I bought a completely rebuilt motor and after tons of money it is tapping just like the old motor don’t know if it is a rod a lifter or what ,low power , check engine light and oil light comes on, fed up and going broke
Neutral safety switch most likely. Several lights weren’t working and it would slip in low gear and reverse on mine a few years back. The connectors get corroded and fail. Pretty easy fix if you have a lift, otherwise it’s a bitch to get at
Ayo, Im trying to go look at an 97 Land Cruiser and its got 360,000 miles, what should check on it and is it gonna be a reliable car despite all those miles?
I would look at the points in this video. Outside that look the same as you would with any car you purchase. Check how clean the oil is ect. As for how reliable that all depends on how it has been treated and how you treat it if you get it. Remember they are getting to be an older car now.
It sounds like from what hes told me it was his family car, so mostly hauling kids and wife around. Im worried most about rust as I live in Northern Montana in US and its extremely snowy and icy for periods. But his has been sitting in his mechanics workshop for most of that time
@@spookytoof8 without Seeing it it’s hard to say. There is still a lot of good ones around that have been looked after. I would take a flashlight and have a good look around under it for rust.
![อาจารย์ยอด : ลุงแว่วเล่าเรื่องผี [ผี]](http://i.ytimg.com/vi/Fd2Qsy4dqpM/mqdefault.jpg)
You have pointed out everything that had happened to my son's Toyota.
I've also had the chasis crack by the steering box. Great vids on the 80 series. I've learnt a lot from you 👍🏾
A real factual and no frills video, thanks heaps
Great Video . I nver would have thought of checking those things . I will go chack my 80 for those issues tomorrow . Very well edited video and love the channel . Cheers !!
Excellent video! I need to check these. Thank you for posting.
Thanks for the tips I’ll check out my 80 series. Otram also has a useful video on pre inspection on the 1fzfe which can be applied to all engines. Keep up the interesting videos.
Great video. And a lot of really good tips.
Good points. Don’t forget the pesky heater hose.
Pug Luva I have never had trouble with. My heater hose
Thank you for the info!! I had a 91 that I had to sell due to the amount of rust but mostly it was starting to nickel and dime me to death. Having said that these are things about 80 series I have never heard of except the rust to floor boards...guess how I know? Anyway I plan on purchasing another and I will be sure to check these out. Thanks again!
Excellent video. I have been putting up with a notchy 1st and 2nd gear for years but never bothered to mention it to my mechanic. I know so little about cars but watching videos like this helps me learn. Thank you!
I’m glad that you found this useful.
If you wish to fix then itchy gears the gearbox will have to be taken out and striped dow. They will replace the first and second gear sincro ring. I took mine to a gearbox and diff place to get Thai done. Just a warning it’s not overly cheep as it is a big job.
@@blackllama1 like how much would you say it costs?
@@TheUnfair I think from memory when I did mine it was around $1800 drop off car and pick it up done
@@blackllama1 Thank you! I will try to be prepared for the price tag.
I live in the United States and you all get all the good rigs down there. I have four different 80 Series from 1994-1997, but all petrol manuals:( Sadly, that is all we could get. No worries though, 350 small block chevy's end up in most rigs in the end. I thought I knew a lot about 80 Series, but you just shows me a bunch of new stuff I never checked. Thanx for the vid:)
I’m glad I could share something.
At least you have an 80 :)
Check the coolant lines from the engine to the rear-heater under the passenger seat. It's really exposed and prone to rust.
Thanks but I don’t think mine has the rear heater. But good to know for models that do.
Mine had a severe crack at the chassis where the steering box bolts go through the chassis but it was not visible due to all the mud and stuff caked all over the chassis from end to end, I only found out when I went to Pedders to see what the issue was with the steering after I had the roadworthy done and some other maintenance work done on it. I had it welded up and some plates made up, welded in place and an extra one also made and welded in place, that I found out about from a forum website talking about an extra plate going along the arm to further strengthen it up. It was a reasonably cheap fix due to a nice guy I found out about here in Werribee Melb that has done this to several other 80's as it is a common occurrence. It was all done for approx $500 which I was quite happy with and he even spray painted it and gave me a warranty with his job.
ouch im glad that you found it.
Thank you
Nice informative video!
😊thanks
Good stuff buddy
Glad you enjoyed
Number 6 ... rear main oil seal leaks...
For the gear box,oil use what the Nas Cars use ✔️. No 2 Rust. Only use fish 🐠 oil in spray can ,,no More Rust!!✔️😁
Don’t own one, not looking to own one but if it’s landcruiser I’m here.
Should have mentioned the auto boxes also.
I'm looking at swapping my running gear from an au xr8 into one as these things can be abit to slow
Yes true I have not had much experience with the autos.
That should be a good swap
Hmmm, lots of good things I've never thought to check. Luckily, I bought mine stock and the guy never used it off road, and in a state where they don't salt the roads. So I got lucky on all of these things. I'm the U.S. also, so mines a LHD. Is yours a manual and diesel? That's sick.
Yes you did well. It’s getting hard to find a stock one in Australia. Some still around but not many.
Never heard of these issues before. On my way to check mine. Any chance those issues are more specific to 80s that have been wheeled really hard? Most of these issues would suggest it. Anyways, checking mine. Thanks!
Roland Rosso cracks are more prone in ones that have been off-road and or lifted. But sterling box crack is a known issue and there is a fix plate that can be welded in. I found all this out the hard way. So thought I would share
How do you remove/service ice /cooler on 80 series vx Land cruiser
sorry I do not have that model I do not know.
Now I got to ask...how do the crack in the steering part of the chassis happens.an the small bar that goes from one side to the other.an the cracked axle bit..well I may as well ask how does it all happen..
Xxxx Xxxx it’s usually in cars that have been used of road. To my understanding it’s just when certain forces are put on things they start to crack. The one on the radius mount is usually in lifted cars. So changed from Toyota’s original specs.
The steering box one is a known fault from Toyota,
@@blackllama1 my son bought a 3 inch lifted Toyota from some cowboy..only went as far as 3 inch springs an shockies.so we've put 2 degree camber kit.adjustable panhard bars..bit more work to be done..
Xxxx Xxxx yer there is some cowboys out there. Would love to see a photo. If you are ok with doing this. post to black llama Facebook group.
I only have. 2 inch lift in mine. I think that’s enough for me.
@@donny-ho1bm Yeah mine is the same.. only the springs n shocks were done and he had 35's on it... so I went down to 33's, there is no need to be that high for my use. I did all the same as you, camber kit, panhard bars, and extension sway bar arms, it all makes it ride better now.
I have a 96 lx 450 motor was tapping no one new what it was and oil leaks so I bought a completely rebuilt motor and after tons of money it is tapping just like the old motor don’t know if it is a rod a lifter or what ,low power , check engine light and oil light comes on, fed up and going broke
Bummer. Sorry I know nothing about those motors. I hope you get it sorted.
Any idea why my 80 series,, brake lights , tail lights, and front marker lights not working?.. the bulbs are good. tnx
Sorry not sure on that one. I am currently trying to work out why my reverse and brake lights flash alternate to my right indicator.
Neutral safety switch most likely. Several lights weren’t working and it would slip in low gear and reverse on mine a few years back. The connectors get corroded and fail. Pretty easy fix if you have a lift, otherwise it’s a bitch to get at
Ayo, Im trying to go look at an 97 Land Cruiser and its got 360,000 miles, what should check on it and is it gonna be a reliable car despite all those miles?
I would look at the points in this video. Outside that look the same as you would with any car you purchase. Check how clean the oil is ect. As for how reliable that all depends on how it has been treated and how you treat it if you get it. Remember they are getting to be an older car now.
It sounds like from what hes told me it was his family car, so mostly hauling kids and wife around. Im worried most about rust as I live in Northern Montana in US and its extremely snowy and icy for periods. But his has been sitting in his mechanics workshop for most of that time
@@spookytoof8 without Seeing it it’s hard to say. There is still a lot of good ones around that have been looked after. I would take a flashlight and have a good look around under it for rust.
Is the background music free vlog music..didn't see a credit for it? Who is the artist?
It came from either art list or motion array not sure one or the other. I’ll have to look it up
👍👍👍🚗🚗🚗🚙🤝🤝🤝🤝
My names chloe
Yo your intro is too long. Suggest cutting it down
My names chloe