ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- European sports car gets some parts store upgrades, I've never seen modifications SO TERRIBLE on any car especially a top of the line 2008 V8 BMW M3 YIKES!! At least the fixes look phenomenal!
USE7Plus: bit.ly/4ahkY5n
CAE7Plus: bit.ly/3VLlDYB
USC7: bit.ly/3VMKSJI
CAC7: bit.ly/3VLm45b
Want a cool 4-leg standing desk like mine？🌟
Use my code “24BDYTB50” for an extra $50 off on E7 PLUS! You can also use '24BDYTB30' for $30 off on E7, E7 Pro,and E7L!
Trust me! You really NEED a FlexiSpot!
SS Valved Turner Exhaust: rb.gy/smxemi
Brake Upgrades:
Brake Lines: rb.gy/13b9lr
Front Rotors: rb.gy/bd0cc3
Rear Rotors: rb.gy/00i9bu
Akebono Pads: rb.gy/842a1p
Wheel Studs: rb.gy/8iec91
Caliper Paint: amzn.to/3IUCznN
Thanks to ECS Tuning for helping out with parts!
My BMW and other merch: www.boostedape...
Instagram - / matt13ross
Early access to videos and other perks below:
Channel Perks: / @matt13ross
Patreon - / boostedapex
Common tools I use: (contains affiliate links which I may be compensated)
Quick Jacks: amzn.to/36gkqBc ebay.us/2rUBfi
Milwaukee 3/8" High Speed Ratchet: amzn.to/3zo9NqC ebay.us/KR0raE
Milwaukee 3/8" Impact: amzn.to/3GaiYyT ebay.us/DhzBdX
Retractable Wall Pressure Washer: amzn.to/473zfl9
Pro Model Wall Pressure Washer: amzn.to/44TZIjc ebay.us/5kMpux
Red Spray Bottle: amzn.to/3DbqszB ebay.us/5xbQoa
Air Hose Reel: amzn.to/44A3kHm ebay.us/bMhFu0
Extension Cord Reel: amzn.to/3o4SyZ3
Jack stand wall mounts: amzn.to/3tWDOi7
Triple square sockets: amzn.to/47zBdsZ
Garage Upgrades:
Noco Genius Battery Tender: amzn.to/3zOCoFY ebay.us/lZJCxy
Battery Tender Wiring Harness: amzn.to/3UncTVL ebay.us/276IRz
Extension Cord Reel: amzn.to/3o4SyZ3
Air Hose Reel: amzn.to/448ZNQp ebay.us/bMhFu0
LED Ceiling Lights (set of 6): amzn.to/36m00GP
LED Cabinet Lights (set of 3): amzn.to/3irLWhg
Wall Cabinets: amzn.to/2TwigqJ
Wall Mount Power Tool Rack: amzn.to/3dNLHvc
Camera Gear:
DJI Osmo Pocket 3: amzn.to/4aUakSR
DJI Mini 3 Pro: amzn.to/3Qz39Yq
Canon 250D SL3: amzn.to/2L477Jm ebay.us/vdqXH0
Sigma 18-35MM lens: amzn.to/3cSM1uY ebay.us/pjLbAT
DJI Ronin Gimbal: amzn.to/3zwyJff ebay.us/ppnxfj
![[UNCUT] “อภิสิทธิ์” ครม.อุ๊งอิ๊ง แย่งเก้าอี้กันฝุ่นตลบ “ทักษิณ” บงการเอง Iคนดังนั่งเคลียร์I 21ส.ค.67](http://i.ytimg.com/vi/a_b-kItw2jY/mqdefault.jpg)
Saturday morning cartoons for adults. Saturday is a good day for content.
Valved systems are a "Once you have it, you never go back" scenario. So nice to have, even better as an old guy
this is amazing !!! you are saving this bmw !!! what a greet work you are doing !!!! thank you
Thanks so much my man!
I have used those same connectors to tap into existing wiring before and found that they have cut the original wire in half which leaves it with less wire to pass the current through, not to mention that they don’t provide a good connection and depending on what the original wiring is powering I would be cautious as with less wire it will be prone to overheating and potentially cause a fire. I strongly recommend not using these crappy connectors for anyone else watching as they will likely destroy your wiring!
Building up to a lovely collection. Hope you can keep the turbos….
Nice work! I noticed you had tap splices for power - not really a good solution for pulling power. Better to fully splice, solder and heat shrink those connections
I'm not a solder fan.
The Shot at 13:15 is Sicck! I dont think ive ever seen the Camera Glide like that overtime!
I use it pretty often!
That homelink “hack” is amazing. 😁now I want a valved exhaust.
I’m pretty sure manual E90/E92 M3s are worth more as a lot less manuals were made for the US market, 100% worth fixing, just keep an eye on those rod bearings you should be good to go
Don’t let us wait so much for you 😊
Nothing wrong with that rusted out exhaust, sounds beautiful!👌🔥🔥👍💪💪
It looked awful lol
@craigmorgan4676It sounds good on video but in reality it definetely has drone and is probably obnoxiously loud and....
Exactly!
An m3 in this condition needs motor out change all the bearings (those on the block also) as minimum
I was just looking for this comment. Sreten, owner of M539 restorations, gave an amazing rundown as for why.
Unless Matt wants to acquire a bluetooth crankshaft of his own
@@Bigtigerr4774 yep but i didn't hear this from sreten only i know a guy here in europe where i live who own this kind of m3. He told me the same thing. You need to change all bearings. He's a mechanic to.
“Bluetooth crankshaft” is may be the top of Sreten’s humor😂 Plus, his E91 rebuild could be top of Bmw restorations!
Foreshadowing?
Part of me wonders how many of these M3's would be better untouched, so many fail after they get rods changed. "If it ain't broke don't fix it"
Amazing upgrade. Perfect 👌🏻
1:24 they don't burble with a stock tune and straight pipes
My N55 did, turns out it had a couple sticky injectors
@@00000005547I got an f10 n55 and I’m tryna fix a boost leak after installing new charge and boost pipes. Mine burbles some only when I downshift sometimes tho is that normal? I’m completely stock other than the new pipes.
@@DaddyJoe_Yes that is normal. Backfire or burbles are fuel coming out the exhaust after combustion and being ignited.
@@brandon-cy9of yea I figured it was normal only started when I chopped my muffs and resonator off😂
my 328i does, its just got muffler delete and thats it.
You should wear eye protection under the car for debris ,only get one pair of eyes can't believe all your garage sponsors haven't thought of safety 😮
I know I know. I hate wearing them lol
I am all in with this build
It's a lovely colour
I look forward to and watch these videos on my days off to get me motivated to go wrench. So I’m 10 min in and properly motivated to tackle a quick project that’s been on my workbench for a couple weeks. Once it’s done I’ll finish this episode with a beer. Keep em coming 🤘🏻.
Nice, get to wrenching!
Merci frérot, je kiffe tes vidéos depuis un petit moment. Merci pour ce contenu force à toi. Génial ce que tu fais.🎩🎩🇵🇹👍
True story! I have an e39 540i 6 speed. Bought it with a 996 mezger CASE ONLY (got nearly 10k CDN ot 7500 USD from a respective company in Connecticut). Original intention was to own a 996 turbo one day but I'm now officially an OG bmw fan boy for life. Love the video of you rowing that e90 zf gearbox!
There goes the wash brush again LOL!
It's soft!!!!!? Lol
Came from tiktok you gained a new sub brother
Glad to hear it, thank you!
Great video! Keep it coming my man👌🏽
Sounds good as closed. But as open it's as bad as it was with teenager yelling "no-one is home at here"
Nice 997 exhaust on the standing desk
Yup!
Running back to get the camera lol
New one sounds nice!
9:26 put some eye pro on mate
What a great feeling when you do an upgrade and it comes out better than you expected. Awesome vid.
Thanks so much!
You could wire wheel that rust off the diff and exhaust hanger areas then use a brush to refinish with a rust blocker paint to clean the underside up.
Eventually yes
Nice improvement! I'm sure the house you drove by several times with the old exhaust will also appreciate the upgrade. Haha
I think so too lol
Great Video!
I’m sure your neighbors will be happy that you’ve changed out that exhaust.
I hope so lol
Noted when you show the vacuum pipe run, you’d replaced the brake lines but missed the “center” tubes. Or am I wrong?🤐
You gotta do those, they’re a pain, you’ll skin knuckles and get covered in fluid, that’s why they burst, always neglected.
They’re only a few bucks, but fantastic training tool for others if you film it well.
I actually have them, but didn't get around to installing them yet. They do indeed look like a nightmare job lol.
Fun project!
If your throttle body actuators have not been replaced you will need to replace them
People wire the exhaust switch to the “Power” button by the gearstick and have it as God intended. Also, aren’t you missing the DSC Off button there? Keep up, this one needs more TLC than any of your Porsches ;)
That's an awesome idea!
Found you through tiktok, subscribed immediately!
That's awesome thanks!
Nice job!!! It looks OE.
Clean install on the exhaust. My E92 M3 came with the 2.5 muffler mod, which made it almost as loud as straight pipes. I ended up finding a stock exhaust unaltered to install.
The valves are cool, but I can't think of any situation where I'd open them? Don't wanna annoy my neighbors, or other people's neighbors for that matter. And most road courses I frequent have strict noise limits(which I find funny when manufacturers call their open exhaust valves "track mode").....
Either way, the homelink hack is also neat.
Just when you want a little extra noise to show off haha
Sounds nice ❤
Heat shield and zip ties… 👀
Hope they last…
The car is getting there mate! Nice job💪🏻
I saw another install doing the same with good results.
I couldn't see them very well but the electrical connectors you used to hook that up looked kinda cheesy to me.
You should get some good ones, solder, and shrink wrap them.
The exhaust looks good.
I've heard those hose connectors always break.
I actually haven't had any issues with them.
i think it would be better idea if you fitted the whole system in the trunk on left side like it comes from factory on bmw cars. thats where the solenoid sits and a vaccum line comes from the fron of the car to there. it was great idea putting valve system because these M3 sound so good straight piped but too loud for all the time opened.
That would work too. But this is how they designed the kit.
The wheels ruin the car wtf was BMW thinking in 2008? Also the front end looks kinda feminine, but exclude the wheels and front end it def has potential to look mean. I'm sure you'll get it perfect just like all your other builds. The yellow Porsche I didnt like until you made it right so I expect the same results here. Thanks Matt great video.
The car does look a bit feminine, but it's fine. BMWs have always made conservative, classy cars (up until the new m3s/4s)
The rims are great too. This car is beautiful, and if it's not for you, there's always the FK8 Civic Type R for something a bit more MANLY! 😂👌
You are my favorite channel to watch. Love keeping up with your projects, especially the Porsche projects. I’ll watch whatever you are doing though!
Thanks for the support!!
enjoy your stuff, keep it up and salutations from Romania
I noticed you have pre LCI lights in your trunk. Outer lights are LCI but the inner ones aren’t
I just noticed lol
Interesting seating position. Looks like you're leaning up from the seat to shift and steer.
I wasn't concerned with adjusting the seat lol.
gotta paint those caliper clips my man!
Nah I like the contrast.
Scotch locks?please wire things properly dude. Enjoying your content thou !
should check crank bearing and rod bearing
Already did in another video
Looks like the VIN tag has been painted over at 8:47 😮😒
Banger of a vid 👌
Thank you!
Oh gosh I just broke that same coolant hose on mine
Seems super brittle
How much trust do you have on those quick Jack's.. I'd be scared to lay there without some jack stands or something.
Exhaust looms great bro
He's been using them for the longest time. I came around when he was building his E36 and he had them back then. Seem to hold up well and he's still here so no real issues it looks like lol
They have built in safeties that lock them in.
Been loving this series. What's the latest with the e36? Went AWOL for awhile lol
It's just hanging out lol. I want a CF Roof and a respray for it
I just realized this car has outer LCI taillights and pre LCI inner taillights lol
Same lol
Oil temp at 210 before going above 3k rpm
I really.like the sound with the valves closed. Is that sacrilegious?
Nothing wrong with that!
You know, I really need to know the name of the instrumental started at 11:33
Bimmerworld straight pipe here, you have a ricer burble tune.
You should let the exhaust tips stick out a little more, they look too far inward from stock
You think?
Code out the annoying BMW chime😮
Will do good point!
Alright Matt, here is your reminder, did you replace the battery in your truck? You're welcome. Haha.
Hahah you'll see in an upcoming truck video (if you watch it)
I would get rid of that rust first of all man
That's last on the list lol
Here for the glass cleaner rattle can
Yesssss
Matt made it looked easy.😂
Looks like an e90 exhaust. E92 exhaust tips are longer so u don't burn the bumper.
These are adjustable
The paint on the car looks like the ink in a ballpoint pen 😂
Sure does lol
Thankfully you don’t say “rebuiwdin’” like some of these British YT car channel weirdos.
Are you saying the V8 has no torque?
Yo bro they sound like that from bmw factory
Not that loud
Great content Matt just wondering how far are you going to go with this one.
Russell
🇬🇧
All the way!
The Torque is high jn the rev range. Your not gonna feel it short sifting at 4500 to 5000 revs 😂😂😂😂
Right. But the opposite of my LS1 form sure.
@matt13ross yeah very different, that will have plenty of low down grunt, good for around town and roll racing ( a lovely deep burble V8 noise).
But now imagine YOUR on track! like the ring in germany or limerock usa, you want those long gears, and you want your torque high up, so you charge to the corner like a charging rhino. Then you Donshift "VHOOOOOP"💥💥💥
Then escape the corner mega quick and light on your toes like a cheetah. 🐆
These cars are all about the track and building up the pace slow to keep the chassis stable, but once your upto pace, its Frightening, especially when those gears keep on going, all you want do is let off.
A shit load of emotion!
Hey from England btw, you need twisty roads for this car. A usa Grid system will not allow you feel the emotion of this car. I can see why you get a little frustrated. But take it to the canyons and step on it. Dont be a pussy a use loads of brakes lol. Sit high in the rev range and down shift to slow down.
Your be hooked!!!!!!
Def need some good Twisties for sure!!!
👍
Please replace these wire clamps and make a proper connection… 🤭😉
Get Carly to sponsor you so you can get rid of that awful BMW chime..
They did 😊
You mentioned lack of torque. Would you supercharge it?
th-cam.com/video/1786HyfmYsc/w-d-xo.htmlsi=FDklXgdtClWVv3Bo
Maybe once it's finished
hey Matt, which brand of rod bearings did you go with?
From turner. Their whole kit. I forget which ones though.
Everything perfect bar the cleaning made me cringe 😂 Dont use a brush on paint work 😢
It's a microfiber brush
Whatever happened to the e36 v8 you had
Just hanging in storage
Get the underneath dry ice blasted
Lotsssss to fix before that.
I really like the exhaust, looks and sounds great. Is there an option to install a switch or is it Bluetooth only?
You could custom wire a switch if you wanted to, I'm sure.
lol dude, why do you have a cap on your head while you are under the car??
Because!!
If I was your neighbour I would invoice you for some noise cancelling hearing protection LOL
Yea I do feel bad lol
Eye protection. /smh
I was not a believer in the valves but after hearing them…😌
Awesome stuff!
What’s the turbo manifold and turbo for? Also the Porsche exhaust is obvious. Did you buy another car with an inline 6?
The E30 sitting outside!
Is the Easter Egg the ‘15 year old’ or the 911 exhaust?
15 year old?
You could have just fitted the electronic box right next to the exhaust valve. You made that job about 90% harder
That's what came in the kit.
Wear safety glasses
It'll have better low end torque when you put the exhaust on it.
Won't change anything. That new exhaust is going to have essentially the same flow velocity
I cannot wait until you change that atrocious paint job on the E92
Same!
Ey bro is the 996 still starting a little slow?
Nah not really
With the amount of time you spend working in the garage, can you imagine how amazing it would be to epoxy coat the floor. Ur floor yuck. Love the videos tho.
Just wait 😊
Sat way too low too
Yup!
@matt13ross I'm suprised it's not rubbin. Mine rubs on back just from tracking been out!
It was when it had spacers on it
@matt13ross the EDC sits naturally lower than standard suspension. If you run 19 inch they can rub if tracking not right. I read that on a forum and thought it was nonsense. I assumed some bushes had gone. I jacked car up 2 days ago and saw a hole In arch liner. So yeah if track is out they can rub. I'm suprised you can alter tracking on rear.
Hey Matt, don't you value your eyes? How about some safety glasses bud?
Rusty exhaust in your eyes is no bueno!
Yea yea