Just about destroyed the new tile plow and didn’t even know it! MBTS warranty claim!!!
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- shop Dirt Perfect
www.dirtperfec...
Facebook
www.facebook.c...
Instagram
www.instagram....
Ariat links
• Save 10% off your first order - ariat.dkkdet.n...
• Dirt Perfect's Favorites - ariat.dkkdet.n...
In the shop to make a repair and a few improvements to the tile plow!
#tileplow
#repair
#welding
#shopwork
#dozer
How nice it is to have "the comedy hour " back....made my night.
The best part of this video was seen Aaron,Man Behind the Seen doing well, love having and seeing him around! Great work Dirt Perfect !
Yes, he's THE man behind the scenes. The other guy is def not. Mom says if you can't say something good......well.
Crickets for MM.
We have a saying here in Northern Ireland, "never cast a clute till May's oute" that Ulster Scots lingo for don't take your coat until May's finished
Excellent work Mike, Aaron, and Matt.
Welcome back Arron. Looks as though he is in direr need of an angled scrafing tip for the cutting torch for that kind of cutting clean up work.
Mike will never have to say "Let's cut twice and weld three times." BTW that red bracket is not to hold a fire extinguisher. It is for the emergency 2 liter Pepsi.
Pepsi will probably work better than a fire extinguisher
If so, he needs to paint it blue otherwise that other cola may make its way into his cab.
@@flick22601 true. And wee can't have that!
It’s more of a cooler bracket for the PEPSI
I was gonna say that before but dp gets so angry about that emergency Pepsi hanger
I'd like to see you add some more gussets there. Possibly at the bottom perpendicular to the new welds.
Hey Mike should you install gusset plates to help strengthen those welds, probably set the gusset plates on a slight angle to keep dirt from building up on the gusset plates which will cause
rust issues, you guys did an awesome job engineering that plow & putting it together, and seeing how well it put pipe in the ground, I sooo enjoy your videos, keep them coming thanks Mike
I was thinking the same.
@@nanettebarling1222 box it
Was my first thought as well... Aaron knew those welds should have been stick welded.. I know he works power plants, but wonder if he is qualified for the nukes?? If so, HE KNEW they should have been stick welded!!! Getting checked off by those engineers will make a grown man cry!!!
Same thought here
Hey Guys, I'm not an engineer but give some thought to a bottom plate added to where you just welded it back together WITH the gussets these guys mentioned.
It's obvious the base needs a lot more strength.
Angled scarfing tips help a pile when you have to wash out weld in a tight corner
Had been wondering about MBTS…, the opening scene of MBTS…, his laugh & smile are like no other…, and loved hearing & seeing him…
Washing that out seems like a perfect job for the air arc.
Was great to see Aaron again. It is always great having him there and working with Mike. Good to see Matt there as well, as you are all getting the big mean green machine taken care of and back to working order. taken it you replaced the Hydraulics as well?? wondering how Jerry is gonna take to the extra controls..??Like the idea of the marking on the digger, and thinking engraving is the best way to go..on the chair just put on differtent colored zip ties on it!
58:00 was the most usable price of educational advice I’ve ever heard!
Hey this will be a good episode Aarons in it lol. I think you should have called Kleeman to weld that Control box holder LMAO
Love the banter, workplaces these days are to clinical just retired and my favourite days were working in the post office over 35 years ago when you were allowed to be an individual and not confirm to what everyone else wanted.
One of the best if not the best “industrial” video on TH-cam. Many thanks guys.
Thanks
Good to see mbts work and more work
Paint the chain and the back of the plow bright yellow and every foot and chain link in black. You'll be able to see it even on the darkest of day's. 😘👍
Colored zip ties for the chain and drill a corresponding painted divot count and score line for the shank .
I learned an important safety tip today. If you're taller than your weld area a ball cap works fine but if you're shorter than your weld a full face shield is the way to go.
Another great vid Mike…thanks!
Aaron has a great radio voice he just needs to say with confidence what needs to be done in the field 😀
Welcome back MBTS hope you will get more time in the future to work with DP… you are a good team together… arguing like a couple super fun but still serious work being done…
You could spray paint white numbers on the back.
sure Mrs. DP has to wonder if having the shop right there to keep an eye on Mike is always advantageous!
Secret to a successful growing company is great employees and Mr. Dirt Perfect is doing it right!
Thanks
Mike it's a joy to watch you Matt and Aaron working together.
Thanks
Great video 👍 Good catch on the pre check inspection,the saying is "it's only as strong as the weakest part"but improvements are on going nice to see Mbts😅
Have you thought about putting a mark on the end of the pin so you know the hole position as you drive it in? This way when you have it out more so you can twist it easier.
im so late getting here been bizzy. got me a big smile seeing mbts and him grinding on ya. such fun time watching ya fix a little weak point. cheers guys.
A real welder would have used 1/8 or 3/16 inch sticks.😉 I was cringing a little as you were cutting and grinding with the torch hose and the electric cords laying on the floor. I've seen them damaged by slag and sparks so many times as they bounce up against them. I always try to keep them up off the floor when possible.
Get a rattle can of clear coat and spray over your white pen painted lines and numbers, will give protection against wearing off
Good to see the crew back together again… even if only a fleeting glance at the Cap’n!
With the official guarantee of MBTS warranty work… I think you can safely say, “That ain’t goin’ anywhere!”
I liked your controller module. It’ll be so much easier to setup, use and take down! Just one question… “How come you didn’t test its fit with the extinguisher in the comment generator?” LOL
Fortunately, you were able to take advantage of Mr Millenial’s BS of Velcrology from Hook & Loop University. Without that, you’d needed to issue a Public Service Announcement when your PSA failed! Everyone needs someone who has BS to help, every now and again!!
Thanx Mikey, for the giggles.
Love it! We all keep learning and that is one of the great things about the Dirt Perfect Channel! Great video! Thanks Guys! Lee
Love the changes, I would suggest taking like a 1/2 “ dim. Drill bit and make reference marks / indent dots for depth markers then paint them with glow paint. 2 for 2 ft. 3 for 3 ft. And so on. Just suggestion.
I think you should paint each of the depths on the chain you are referencing with neon paint!!!
Keep the Joy Stick and Control Box away from the welding. Electromagnetic Radiation from the welding will destroy the IC chips.
I was just thinking about the weld spatter melted into his new creation.
I had a pair of those "man scissors" too, and I don't remember them cutting anything with success, but I never threw them away because I kept thinking that one day I'd discover a material they would eat right through. Eventually I threw them away.
Awesome awesome video. Very impressive and too many positive thoughts to list! Enjoyed the vedio ❤️👍👌👌
3M Dual-Lock tape will work for the joystick. It has a very strong, stiff lockup which should not work loose from a bumpy ride, while still allowing you to remove it by hand prying.
That whole thing pivots on that point doesn't it? maybe some horizontal gussets may help just my visual opinion it may distribute some of the pressure elsewhere 😂😂 FJB 👊💪
maybe Clint's son Trevor at C&C can make you some HD decals (numbers) for your plow depth....
Just a note. Don't separate the Velcro before cutting it. Saves a lot of time and effort and both pieces end up properly aligned.
Came here to say the same
Exactly!
Nice improvements and upgrades/repair 👍You are multi-talented with a great crew.
The fire hose idea 👍💯
For Matts measurement idea on the back if the ripper, you could always paint the 1 foot block between the 2&3 and the 4&5 a different colour. Either black so its not too obvious or go full HiVis yellow/Orange so that way you know the bit where the 2 colours meet is the foot marker. The paint seems to be holding up well on the back of the ripper so it should stay good for a while.
The star is back!👏👏👏
Jobs like this is where an air arc comes in handy.
I agree with you Mike I would have put gussets on it out of 3/4" just as a precaution. Obviously, a monumental amount of stress right there.
Have Aaron Carbon Ark them numbers in the back of the boot so they’re recessed and then paint them bright yellow
DON'T TELL HIM, but it was great to see Aaron again. ;)
Idea for marking the chain, on big ships the anchor chain is painted different colors at strategic points (1ft, 2 ft, etc). All you have to do is see which color is touching ground to know where you are. Blast one link every ??? easy peasy.
Mike, you guys are the Poster Child delegates for American Ingenuity and Backyard Engineering.... it's folks like you, your entire circle of friends and acquaintances on an off YT... that Make America Great Always! 👏🏽👍🏼☺️
Thanks buddy
nice maintenance update.
For your spot depth indicator, you could just paint each square a different color.. loved the video.. Thank you for sharing...
the joy stick plate base has the holes just use it to mark the holes to mount it
Good videos thanks for sharing your story with us and day
Thanks
I would cut a couple pieces of vacuum line to the correct length and then slit it and fit it over the edges. 42:56 for the section that was cut and folded for the wire. yes I know it's zipped tied.
Far as marking Depth gage on your Digger, if what you have now doesn't work out, considered buying some stencils and bright spray paint. They come in many different sizes. For best visibility, use 4"-6" size numbers & high contrast paint. Canary or fluorescent yellow should be great against Olive green? Love this group of Amigos. What a hoot ya'ii can be!
Matt- Hank Williams Jr sings ( country folks can survive)
I weld 2" plate for transmission line with flux core and mig with no problem that part that is highly stress area may need gusset to help that area on the pull or box in there's also a lot to tensile strength of The wire to the rod
Should paint the bottom chain link orange....and do 6 inch increments on the top
Hi Mike, I would suggest you paint the guide/measurement chain bright orange so you can easily spot it from the cab.
Might be a good place for some gusset plates spread out that load maybe two on each side
Glad you caught that crack before it got critical, Mike. Just goes to show the importance of regular equipment inspection!
Yup exactly
He caught it before the tractor left the plow behind that would have been ugly
Mailbox stickers for the numbers possibly or a sticker mine held up well on the D4g
lol yes it did
needs a bottom gusset plate same as the top one and a set of side plates
Zip ties are mankind's second greatest invention. Caller ID and the 1911 pistol in 45acp are tied for first. Condoms get an honorable mention. Sorry, I'm a bit off my meds this morning. Lol.
With the chain all you have to do is paint it a different color each 12 inches!
Tile plough 2.1 this product contains the latest updates :)
Grind those numbers in the boot for depth with roman numbers
Those little 'jobs' are gradually making this whole project awesome. Fun to see MBTS and NYA Millennial in the shop at the same time - lots of laughing.
You said you sand blasted parts prior to paint. Stencil and sand blast the lines and Roman numerals for reference marks, may even paint a contrasting color prior to unmasking.
...after testing, fine tuning is always needed...lol..keep safe..
it nice to see Arron back and in full flow and ripping into dirt perfect great video lads
5/50 warranty, 5 feet or 50 seconds. Which ever comes first. 😊
Looks and works well guys.
Nic bit of team work there dirt permit men.. This new toy will be very useful for you .maybe you need to patent this baby ?
Gouge out, reweld and put some gussets to help support
Awesome freehand
It’s nice having mbts back he’s to funny
I see Aaron in a Kiewet Sweatshirt. In the 60's my dad worked for Pete Kiewet and Sons in western South Dakota where they were building Minuteman Missile Silos. He was responsible for radio communications.
Awesome
Yayy! Bow down everyone to the power of the stick! That bracket/shelf is too tight to the window. Grind off a 1/8 or so for clearance.
My Wifes stepdad always said If it don't hold bring it back !!
I thought that would break up as you lifted it but surprisingly no 😅
Walmart has a heavy duty square to where the 2 to 2 and a 1/2 inch heavy duty Velcro it will hold it I've literally helped my phone to the - with it and believe me if you put one on each corner that it won't hold it
Aaron Bumm Man Behind The Scene.... I'll check that out - thank you.
@ 59:03......OH COME ON!!! Mike just put a softball out there!!!! #familyfriendly
It keeps getting better .......well done boys......good to see Mbts too
Mike is good with the the welder and the torch but not as good as he thinks he is lol
Howdy, For the markings, have you considered Etching the numbers and lines? It can put the info into the metal then you can paint the etching to make it stand out.
No I have never tried this but there are videos on the process.
Nice to see that smiling face! Now get to WORK!!! MBTS
My hat is off to Aaron's welding ability,the man's a pro !!
Yes he is
Carbon rod scalloping is quick and very controllable.
I bet these welds behind the scenes will hold up much better! Love the Portable Control Center Console sumthin sumthin thingamajiggers.
Plow away guys, plow away!
How about painting the numbers or the line with different colours. When did the dozer disappear?
Early this morning at the Dirtcave , Dirtman and his faithful sidekick, Shortnin, are busy fine tuning the Dirtmobile 's newest soil fighting attachment, the Tile Injector. In a previous episode the forces of nature have attempted to destroy the Injector and Dirtman and Shortnin are working feverishly to restore it to full strength. "Holy snikeys, Dirtman, we caught problem in the nick of time", exclaims Shortnin. "I suspect the nefarious hand of Hilljacks are at work here!" ZZZT,BAM,WHINE, CLANG. Shortnin makes quick work of the problem while Dirtman and his trustworthy butler, Mattbert, make additional modifications to the Dirtmobile in an effort to make the Tile Injector even more powerful and accurate. Derbham is once again rescued from disaster!!
Nice job! You have all the latest and greatest of cutting and welding equipment for sure! I am torches and stick only! I watch a TH-cam channel ICWELD and all he does is weld and its amazing how equipment has improved since i was welding and cutting!
Okay. The Keystones Cop type music seemed so appropriate. Lol love watching you guys work together. If you can’t have fun and get a job done , it’s almost not worth it.
The horizontal plate between Aaron's two vertical stick welds. No hairline crack in its weld? Also, you can just dangle 3', or whatever, of chain to get your depth.
ah yes. breakfast with the comedy duo of DP and MBTS=nothin' finer. Glad to see MBTS back and ready to hit the ground runnin'. DPs free hand cut purty good. should oughta keep using the guide. still think that plow is a money maker of the first water.