Converting my old ripper into a water line / cable plow will it work good ?
ฝัง
- เผยแพร่เมื่อ 20 มี.ค. 2021
- shop Dirt Perfect
www.dirtperfect1.com/shop
This might be a long shot but we are going yo give it a try and see what happens. Have a job coming up we have to install over a 1000 feet of water line so time well tell.
#dirtperfect
#homemadeattachments
#cableplow
#howitworks - บันเทิง
Hahaha ,Mike on fire watch ,laughs at aron on fire, 😆 great fun ,love it .
Fire watch=Mike watching Aaron burn up! 🔥🤣🤣🤣
😁
I know it lol 😂
when yer buddy is on fire one is spoosed to wait till they start SCREAMING UNLESS threat of YOUR STUFF BURNING TOO....
that's indy guycode rule # 114 or something like that ;) LOL shhhhh sorry
actually it's ANY STUFF ;) yours hiz herz wutever ;) lol before any stuff starts burning!!! yea that's better
@@alexmikhael5061 😂😂
That thing is MINT! I never doubted you two.
If you weld a line at 18” and 24” would give you a nice depth reference from the machine as you work.
Lol. Was just gonna post the same thing. Good idea. 👏
Well it's all on tape, MBTS overdrew the genny... LOL.. But the water line/cable trenching/knife thingy, looks like it may actually work.. Hey and that should be it's name "Waterline/Cable Pulling Thingy".... That was just a very fun to watch episode.. I had fun and laughed my BEEEEP off...
Can’t wait to see it In action 💯
Now if Aaron was a pipe fitter he would have 2” sech. 40 pipe and you would never have to worry. Pipe fitters rule.
I have a pile of some of my ideas that did not work behind my shop. You do not know until you try it. Definitely leave the tooth on!!
There a MacGyver in all of us. I turned my CPAP machine into a Mini vacuum cleaner now can clean between the seats in my pickup
You need Captain Kleeman around when MBTS is playing with fire.
DWL. Just watch a video with Captain Kleenman setting some trees on 🔥🔥🔥🔥😂😂😂😂
That ain’t no joke lol 😂
Only if you play Axl Rose's "time to die!!" On a loop in the video 🤣🤣🤣🤣🤣🤣🤣🤣
MBTS has good taste in trucks. Must have bought it at a white sale. Need to run some hard surface rod on the sides.
Now weld some depth lines on it so there is no guessing... That would work incredibly well here in Florida. With the winter freezes happening here and in Texas, you might be onto something needed now....
We are ran out of time
another good laugh boys,especially the small fire and the blackout......thought for a minute we had a power failure.............ingeniuos idea + expert cutting and welding = good job.....Aaron
I love the fact that a lot of common sense comes in play here. Don't see much of that any more. You two have it! Awesome 👍👍
Lol thanks
Like everyone else, I can't wait to see how this works! Thanks!
I got a little while oilfield electric line for a submersible pump to power my pump house. I bought a cheap ripper for the tractor. Ripped a shallow ditch to avoid water and buried electric lines . I laid that 2/0 in the ditch, ran a dirt mover to cover it. I can run nearly anything from the pump house now without trying to get huge equipment close to the barn.
Great video DP. My how things have changed since this video was made. You're definitely growing and you are my favorite excavating channel.
And yet another great video. I just don't understand why this channel isn't at a million subscribers with all of this great content.
Thanks Tom
Around December January deer usually loose there antlers around March loaders loose their forks, so while most people are out antler shed hunting Mike and Aaron are loader fork hunting..nice find guys, if anyone asks about your find you can now tell them you have a matching set....
Lol
😂😂😂
Good morning Dirt Perfect and Man Behind the Scene, greetings from Jamaica 🇯🇲. U guys never stop amazing me with all kind of new project. Loving them ❤️❤️💜
Thank you Lloyd
Kinda fun to watch it work and then come back and watch it get built!! Nice job!
Thanks
That should work just fine. Looks good and strong for not having to cut through frost.
MBTS must have loaned his pickup to Camarata, that right rear looks like his work :)
Pipe should of been made from roll cage steel pipe, the wing was a good idea.
Another great video. Thanks for sharing. Kevin
Looks like it should work very good. Can't wait to see it working.
you guy have a lot of fun when you work. love the videos keep them coming.
Great Video. Thanks
I know you’re my type of people when your buddy’s on fire and you laugh. 😂👍🏻🇺🇸
😁
Good job I hope it works well for you guys. Thanks Mike for the video 📹😀👍
I think it looks great! I made one for my excavator also it works pretty well. When I see a lot of tree roots I go through them first with no wire or pipe. It makes it so much easier! Once you get it hung up you will cuss at it. It’s hard to get started again!
thanks for the video Mike and Aaron
The best work on utube
Thanks
Looking good!
I like how you made a sphinkter out of rebar and was really proud of it
Can’t wait to see it in action!
Looks good can't wait to see it work
Looking good👍
Looking forward to seeing it put some line in the ground
Good job guys👍
...lookin' good, nice work, stay safe..
Thanks for the great video!
Great video, Love to see it in action. Keep the videos coming, You and the MBTS are great to watch. Thanks for sharing.
Thanks Andy
Very interested to see how it works out. Nice work.
Nice job on repurposer of the hook, great video 👍
Looks good. Good video.
Looks great
Your welders a funny guy and his laugh is infectious.can only imagine half a case of cold snacks i would need stiches in my gut from laughing so hard.snooky pa.yeah itll work just fine!!
looking forward to see how it does
And that's how things get made. Trial and error. Now to see if it works !! Love to watch fabrication being done. You guys rock !!!
Thank you Mark
Great video Mike
Never fails,I learn something and get a laugh everytime from you guys,keep it up.
Fire watch hey MBTS. Your arm burning 🤣🤣🤣 y’all would make a awesome comedy show
The ripper / line installer looks like it’s going work if it does you to pattern it.
All you need now is a short second pipe welded to the first pipe with a 'toilet role holder' to automatically feed the warning ribbon at the correct level. Regards from Austria
Most water lines in the u.s. if its after it enters the termination structure it doesnt need ribbon. And on the east coast maryland Pennsylvania and west Virginia and virgina you dont need ribbon or a tracer wire unless its a city water line
Here in the states or some of the states, we have a locator service that is paid for by all of the utility companies. They come out before you dig or trench and locate all electrical water and underground lines and mark the ground with different colored paint to let you know what line you are getting close to. Plus we have depth regulations on how deep certain utility lines are supposed to be buried.
He could feed a tracer wire with the pipe. Just need a spool
Piece of art right there bro.
I think I need to watch the hole video before I comment. Lol
You could get even fancier and put some sort of vibration to it but I think you got something there guys👍
Hi Mike here is a tip for you if you Freeze water inside the Metal Pipe you would not have any kinks just clean curve ,
For the wheel if you can find old Kids Trampolines you would take ideas from the one yeah use ,
3 Heads full of Knowledge get working on your ideas ,
This is really super what you and Arron have made there will be quite of viewers very Jealous of this one,
Excellent Videos keep them coming ,
Please bring Lt. Dan back in the Lime Light this is super Project
Keep the Team going just super to watch on the TV
Great looking project! I work for an engineering company, but I’m not an engineer! That is what we call a country engineered piece of equipment!! Ready to see it in action!! Enjoyed the podcast!!
Thanks
paint it all up will look fabulous
Weer een top job geweldig gedaan ✅🤩👍👌👋🏼✊💪
Great job and ingenuity 👍
Thanks
I have a subsoiler, just a three point goes on the back of my tractor I modified it to put in water lines, i love it.
This is Jack the Ripper. Party in the front, knife in the back.
Don't forget to polish smooth the exit for the pipe. Maybe put a bell end on it.
Trevor (from Queensland, Australia) Hi Lads...you appear a bit worried about running into hard rock or maybe tree roots when laying that pipe. If you havn't already thought in this direction and because you cannot back-up when pipe laying, may I suggest that you do a "dummy" run with the ripper first to clear any obstacles. This may take a bit longer to do the job, but it will make for a clear run when you lay the pipe. Cheers, and keep up the good work.
Mr. Dirt Perfect, now can be known as "Captain Hook" !
Love to see it work guy's
If it works as you have planed, that'll be a real time saver and do minimal damage to a yard. Great job guys!
That is some fine torch work MBTS.
Thank you bud 🤙🏻
@@aaronbummmanbehindthescene4931 you made that look easy , thats the mark of a skilled tradesman . Hats off to ya .
Pretty as the girl you married smile... well close to it. I would of went out for the proof work and did some home trence thing.. just saying. Plus this will come out while I'm at the doctors being cut on again.... I hope their cuts are as straight and nice as the ones you fellows made. I really don't like comparing but if it came down to it, Aaron would be the last to go should downsizing hit your driveway. Nice all the round job and it does remind you of a bottom plow somewhat. Keep em coming
Well, I guess that wasn't too bad. The only thing MBTS set on fire was himself...this time. Lol. Can't wait to see that thing work. Y'all stay safe.
😂😂
I worked on a Job 20 years ago where they built something like this, but was mounted on a Cat D6 Dozer, they built a carrier for the wire spool which sat up on the top my the inlet. There are ones which go on Trenchers for 4" drain pipe etc.. but all n all nice build guys, Arron great job on the welding as always, good design by Mike, well time will tell.
That's awesome
Use dish soap in the tube when you start helps pipe slide
Worked on a manufacturing line where we would spend an hour climbing under, over and through it to rethread whenever the power flickered. Five power outages in a single 8 hour shift.
I'm anxious to see this thing working!
I think it might could work. I know on Millennial Farmer's channel, they installed some drain tiles with a similar looking contraption, & it did the job for them!
That’s some top notch welding by Aron. It takes a lot of skill to weld the thin exhaust pipe to that thick 1” plate.
keep the heat on the 1'' and feather it to the thin stuff from another welder mbts is one hell of a good one
Thank you don
@@joshuasoom7960 thank you bud 🤙🏻
I agree wholeheartedly! I've been making my living welding for over 20 years
I think it will work, nice job.
I believe that will work just awesome saucy. I built a similar but smaller version for a 3 point and it did great for about 12" deep to lay power/control wire.
Without having a roller bar you can unroll the line and pull back a working loop that a helper will have to manage/feed as you travel.
Can’t wait until we get to see it in action.
Well if all else fails and you will have to make attachment for the dozer on the back lol looks like a piece of art
Aaron is an awesome friend!
That old loader sounds like me in the morning 😵
The plasma cutter would work better cut that angle
You should not smile while mbts is on fire haha. I hope it works well. Great video. Stay safe
In Australia they make those contraptions to tow behind a dozer or excavator. They call them a delver. Feed for flexi water pipe and for direct lay electrical
Very pretty area there
Can’t wait to see Lt Dan finished
😵 That looks so cool..... Never seen a ripper like that before 👀
Great job guys
Next you'll be designing a removable spool attachment for the stick to put the water line spool on.
"You were right on cue" Priceless! 🤣
MBTS reminds me of a couple of guys I worked with. I think they could light asbestos on fire when using a torch, welder or grinder.
Some pretty amazing skills you blokes have.
Thanks
Another good fabrication hope it works out for you seen your live feed last night you guys were in rare form
Don't ever lose Aaron...he's a hoot and a great welder to boot.
Looks good boys but might want some electrical pulling goop to make the feed in the pipe smoother.
The rebar doughnut looks good but I would have put a nylon bushing in the pipe. Maybe you could put one in the doughnut.
Good job
Thanks
Thanks guys was great viewing as always
It's definitely made in the USA 🇺🇸. Looks good enough to patent 👍
Thanks
I wish waterline was that shallow up here in buffalo lol ,we're 4feet or deeper
All the stuff he talked about to put out fires but he didn't mention what he used to put the fire out over at the wall. Does anyone remember what he grabbed to fight a fire with? A squirt bottle of all things. Master firefighter at work. Lol! Way to go DP! 👍
Just like a farmers plow polished will work better then rusty. After getting rid of rust put a very thin coat of spray paint on plow it will go threw the ground like butter. Might help putting more of an angled edge, looks good guys nice work, should work fine
Al la cleanman now you need is a daisy flower base spinning holder with another set of pettals sticking up through the reel of pex. 🙂 'Ive seen the future and I know it is true' ;-)