52" Madison Ceiling Fan Installation Guide

How to install the 52" Madison ceiling fan. It is an indoor ceiling fan with a built-in color changing LED light kit. If you would like to skip to a specific section, use the menu below. Learn more on our website: www.tal-usa.co...
Chapters:
0:00 Introduction
1:07 1a. Standard Ceiling Mounting
2:40 2a. Electrical Connections
3:47 1b. Close-To-Ceiling Mounting
4:46 2b. Electrical Connections
5:47 3. Fan Blade Installation
6:13 4. Light Kit Installation
7:03 5. Operating The Fan

[@paullucas9174]

*Great unit that’s easy to install and use. It’s relatively quiet compared to window units and **Fastly.Cool** , and it cools down our whole living room, side room and bathroom; which is a large space for any unit to cool.*

[@peterschreiner9592]

One of the best video installation instructions I have seen.

[@elliottcurry]

Okay, so I am not like handy...at all. As of late, however, I have been replacing lights in my house. For the previous 3 ceiling fans, I got a guy to come do them. And for the newest one - 52-inch Madison Ceiling FAn- I was hell bent on doing it myself. YOUR VIDEO MADE IT GO SO SMOOTH. I literally paused the video when you showed the excellent wiring diagram, screen shotted it, and printed itou. I am shocked. I ran into a slight problem with a red wire from my ceiling that wasn't in the instructions or your video. And I managed to figure it out! The fan looks amazing, and you totally rocked out. Will be subscribing!!!!!!!!!!!!!!!!!!!!!

[@chazchandler1342]

i have a red wire also, and i can’t figure it out. what did you do with it ?

[@elliottcurry]

@@chazchandler1342 Arg..I wishI could remember. I am sorry. I did something. I think I connected...i don' tknow sorry bud

[@vanessar1325]

@@chazchandler1342 i connected the blue wire with the red, sorry I couldn’t respond before. I’m having issues with controlling the light

[@lacyrsky02]

Not sure why but I could not get this fan installed. The remote control receiver caused a lot of problems and then the slot screws would go in but not line up with the other holes. I gave up after hours of trying. The video makes it looks so simple! 😢

[@RollingGiggles]

You were a greatttttttt help! Thank you!!!

[@toebuns4135]

Your amazing thanks

[@nicholaszegarski4774]

What happens if the box in the ceiling is two small and the two screws don’t fit the bracket? Does that mean I have to rip out the box and place a new one in??

[@PaulAnabellaLewin]

Hi
My old fan was installed without an electric box to mount the housing. It has a hook coming out of the ceiling.
Is it possible to mount this fan with the hook method?
If so, how?
Thank you

[@user-lk5lk2vf1g]

Is it possible to run the light without the fan and vice versa?

[@dravenhadi7790]

You! Made the fan

[@gobananas1620]

How many identical fans can be installed in the house and how do you make each remote only operate one specific fan? Thanks

[@tw8126]

Thanks! Used the vid to be able to change the frequencies of the remotes…as I have 2 of these…and wondered why the upstairs remote controlled the downstairs fan. Stupid installers!

[@Keithola1]

Hi. Can someone tell me how dimmable the light is? Can it go extremely low, as in 5 to 10%? Thanks!

[@JimmyC1979]

I just installed this ceiling fan and everything works fine. The only problem is that when I flip the switch up on a different switch in the room, it trips the breaker. Does anybody know the issue or have a solution?

[@dmoney8177]

You’d have to contact your local electrician. Sounds like too much power causing the breaker to trip.

[@user-lk5lk2vf1g]

Is it possible to run the light without the fan and vice versa?

[@user-lk5lk2vf1g]

Is it possible to run the light without the fan and vice versa?

[@user-lk5lk2vf1g]

Is it possible to run the light without the fan and vice versa?