Repairing rotted posts with concrete columns - Pole Barn

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ก.ย. 2024
  • www.freedomkongvold.com
    Standoff Post Base: amzn.to/3jM5grq

ความคิดเห็น • 22

  • @danielb1877
    @danielb1877 ปีที่แล้ว +2

    Thank you, this is helpful. I have a number of posts to do (probably 3-5) on our barn. The first one should be the easiest--the mid-span post in the entry of the barn.

  • @wulfclaw4921
    @wulfclaw4921 ปีที่แล้ว +1

    Another thing you can do is burn the wood that will be subsurface. I coat mine in used motor oil also.
    Good video !
    👍

  • @excelcsllc
    @excelcsllc ปีที่แล้ว +1

    You don’t say so?!?! I’m not a fan of this post on dirt idea and these pole barn builders should be ashamed of their work. It looks beautiful for a few years and then your posts are rotting away! Money not well spent my friends!

    • @freetotryit
      @freetotryit  ปีที่แล้ว

      I would agree with you in part. Where I good drainage the posts are in excellent shape even after all these years. That said, if it was my choice I’d pay the extra for the concrete perma columns keeping any dirt and moisture away from the wood posts.

  • @fricknjeep
    @fricknjeep 2 ปีที่แล้ว +1

    hi there rotten posts hit home good show john

  • @PearlsPage
    @PearlsPage 3 ปีที่แล้ว +1

    your home is beautiful

  • @llamav4
    @llamav4 2 ปีที่แล้ว +1

    hey nice video! thanks for making it. I have a question about the notch in the sonotube. If your concrete fills the tube and goes up to the bracket - and the concrete in the notched part will be contacting the horizontal board. Are you not concerned with rot along that board also?

    • @freetotryit
      @freetotryit  2 ปีที่แล้ว +1

      That’s a great observation and the answer is yes. But since there will be no exposure to rain/snow the likelihood of moisture getting trapped there is unlikely.

  • @bradyoung2572
    @bradyoung2572 4 หลายเดือนก่อน

    The Pro Barn Savers have a whole lot better system and no digging

  • @asamacres
    @asamacres 3 หลายเดือนก่อน

    Vibrate the concrete in the form to work out all the gaps and settlement next time.

  • @toddavis8603
    @toddavis8603 7 หลายเดือนก่อน

    Good repair carpenter, and steel bars in window is great for security!

  • @brianfogiel9118
    @brianfogiel9118 6 หลายเดือนก่อน

    Exactly the video I needed thanks

  • @mythical0bjective
    @mythical0bjective 10 หลายเดือนก่อน

    Excellent very insightful

  • @mythical0bjective
    @mythical0bjective 10 หลายเดือนก่อน

    Would you recommend a similar approach if the column were a corner?

    • @freetotryit
      @freetotryit  10 หลายเดือนก่อน +1

      I actually did 2 corners the same way.

    • @mythical0bjective
      @mythical0bjective 10 หลายเดือนก่อน

      @@freetotryit thank you for responding

  • @adamsfamilynfun1409
    @adamsfamilynfun1409 ปีที่แล้ว

    We’re these treated posts to begin with?

    • @freetotryit
      @freetotryit  ปีที่แล้ว

      Yes they were. Sadly even treated posts will rot when the environment is poor. :(

  • @dennisbehm6030
    @dennisbehm6030 2 ปีที่แล้ว

    Did the settling occur because the concrete drained from beneath the form or because it actually shrinked while hardening? I'm going to do something similar and the concrete specs i found on the internet say the drying contraction should be no more than a couple millimeters.

    • @freetotryit
      @freetotryit  2 ปีที่แล้ว

      Yea that’s a great question and I assumed it was from the mix settling down in the tube and some water loss out the bottom.

    • @keithwiebe1787
      @keithwiebe1787 ปีที่แล้ว

      @@freetotryit Do you do the rest of the posts? How did you cure the settling?

    • @freetotryit
      @freetotryit  ปีที่แล้ว +2

      @@keithwiebe1787 to help it settle better I took more time running a piece of rebar up and down in the concrete to help fill all voids. I also mounded the concrete slightly at the top. Doing both of these worked well.