How to Fix B58 PCV Diaphragm, Repair Smoking Squealing B58's From Faulty Crank Case Vent Valves DIY
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2024
- Bmw 340i 440i m240i m140i m340i a90 a91 supra B58 PCV Diaphragm Replacement Kit Cap Spring.
Common Problems are Smoking while at idle, or even a squealing noise from excessive pressure pushing past the crank seals.
GET THE REPLACEMENT KITS HERE
www.bimmernetw...
PLEASE LIKE FOLLOW AND SHARE IF THIS HELPED
Follow my instagram's
...
...
#bmw #340i #b58 #b58pcv #pcv #440i #m140i #m240i #m340i #m440i #supra #a90 #a91
Thanks for making this video. I did as much research as I could after getting my ‘16 340i almost 2 years ago and have been driving around with a pcv diaphragm in my trunk for almost 2 years haha. Well…Today was the day. Luckily and unluckily I was right in front of Walmart and was able to grab what I didn’t have. I had a general idea of what I needed to do, but watching your vid while grabbing parts helped me knock it out in 10-15 minutes.
Nice! Glad it helped out
Ik this is an old video but this shit saved my life. Just make sure not to crack the old cap in case the new one doesn’t fit. Piss easy job took me less than 5 minutes.
Thats cool its actually serviceable vs the built on crap.
Also, it comes off easier when car is warm. Found out the hard way
I think that was the reason mine shot off🤣 car was only off for 20ish minutes
Awesome video I fixed my 540i 19’ like this
Love taps around the ring 😅
💪🏽💪🏽appreciate this
literally just saved my fucking life bro
Thank you for video bro!💪🏼💪🏼
Goodd morning, excuseme i have a question... is necesary clean something, after to replace de pcv? or replace the valve only. thanks!
Wouldn't the gasket sealed made it impossible to take off if needed?
No
What causes the noise smoke / having to do this repair?
Thanks so much!!!!
Had my 2018 M140 at the dealer today. They want me to replace the PCV valve as well as the valve cover (apparently you can't replace it separately).
Symptoms of mine was the smoke and oil consumption.
This replacement is done instead of replacing the entite valve cover. Bmw dealers make more money replacing the entire cover
@@trevorjelam is it required to replace the cover?
@@wordlife_97on gen 2 b58 yes since the pcv diaphragm is built into the valve cover but yours is gen 1 so no you don’t have to replace the whole thing
How about a 2018 740i? Do I need to replace the whole valve cover??
@@sharifhrivers nope just the replace the diaphragm
did you have to cure the gasket maker on the cap before installing?
How long did you drive it messed up? I’m scared to drive mine until it comes in
Great Video thank You!
How do I know what Gen my B58 is? Dealer wants 4k to replace the whole cover! 2016 340i M.
Thanks
2016-19 is gen1
I’m having the squealing whenever i accelerate no smoke
Does this work on S55?
I replaced my entire valve cover when this happened to me because there was not a kit available at the time....
You just saved me a couple hundred🥲 I’m thankful for this video 🍽🦃happy thanksgiving bmw brethrens
Hi mate
Any update on that Hybrid Turbo you were testing few months ago???
Yes! I sell them! Ran a 6.7 60-130 full weight at 8000ft da, here's the linkbimmerboiperformance.com/products/dynamic-autowerx-b58-flowmax-v2-5-turbocharger-gen1-b58?_pos=3&_sid=36331754b&_ss=r
@@trevorjelam thanks for reply. I’m not sure this turbo is gonna allow me to achieve my goal🤔
@@tontom4822 dm my insta, i sell many different options, can help find the right choice for your goal
How were you sure it was the PCV and not the turbo seal? Just trying to be sure before diving to deep
Pcv is $40, replace it to easily figure out which it is, link in desc
can’t find the aluminum cap on your site
Im having the same problem on my 2018 540 (B58) is it the same process to replace it? Or is it the whole valve cover?
same procces but the cap my be slight smaller since your a g body
Do you let it set for the full 24 hr cure time or do you think, just over night as you stated is good enough?
I would definitely do overnight as a minimum, but 24hr like instructions to be completely safe
I’m doing this as a last minute repair. This is my only car. Is it safe to drive the car a few hours after applying the RTV? Or is over night mandatory?
@@almirsahinovic9275 what’d you end up doing for fast repair? Just slap it on and drive it?
I thought newer BMWs the PCV was built into the valve cover.
2nd gen B58s are
Is the pcv repair kit available for the b48 engine
No unfortunately bmw put the pcv internally in the valve cover on the b48
Is this the same thing for a 17 540i? Just want to make sure before buying the part
Yep!
did this fix stop the smoke
I have 2016 bmw 740i with b58 engine will this kit work with mine
Yes
@@trevorjelam Thanks I placed a order my 7 runs 1000 percent solid I was in the car with the ac on for about a hour smoke started coming out the exhaust driving today all day everything is good I'm gonna replace it as soon as I get it ....
Just installed. Letting it cure over night. I hit it a few times but i was able to pull it up with my hands when i try hard. Is that okay?
You may need to get one of the metal caps we offer if it doesnt stay on after tonight, it should fit snug with even pulling on it.
@@trevorjelam pulling on it pretty hard?
Hey I’m out in CA how can I get this to me ?
We ship world wide
Does pcv cause rough idle?
Yes
Can This Work For 2017 540i x drive ?
Yes
just buy a PCV delete kit
Er, no thanks - I'd replace mine with the OEM one. One would think they'd design it easier to take off and replace though.
Oem is a new valve cover
I got ripped off 2 years ago
This didn’t work lol smoking more than ever ha
Confirm that the rubber is seated properly
@@trevorjelam yeh it is its smoking even worse now think I’m fucked it’s bad bad
@@danked6731 make sure your plastic cap is secured down tight, some of them pop off. If so, the metal cap offered on the site should fix
@@trevorjelam link me can ya
@@danked6731 its in the description