When a Dentist Should Choose Acrylic, Flexible or Metal Partial Dentures | Stomadentlab.com
ฝัง
- เผยแพร่เมื่อ 19 มิ.ย. 2024
- When to choose an Acrylic, Flexible Valplast, Zirlux Acetal Resin, Thermoflex, Wironium metal or Titanium metal partial denture for your dental patient. stomadentlab.com/
So far this video is the best for what I am looking for. Bravo!
Thank you for your feedback.
You need to get rid of the background music. It's drowning out your voice. Thanks.
I looked through the comments section to see if anyone else mentioned this. I couldn’t even watch the video because the background music was so disturbing!!! They shouldn’t have ANY music playing at all!!!! Even if they turned it down low, it’d still be awful.
@@UniquelyGeeky Thank god for CC reading
Thank you for the feedback, I'll make sure to let my team know.
Excellent video! Thanks for this information!
Appreciate your feedback!
Great video! Thank you.
Thank you for such an informative video.
Appreciate your feedback!
Best video thanks to you Dr
Thank you for the feedback.
What type of blank is that and for which milling machine,regards
Interesting video, good information, I need to find a supplier now.
Your welcome.
Worldwide shipment of your works?
Great!!!
Thank you for the feedback.
Has anyone made a full upper denture with titanium palate? I had a wonderful titanium partial that worked well for over a decade. Now I have a full acrylic denture that is too bulky.
I am wondering the same so many dentists want to request for the Acrylic because it's CHEAP and sadly it's beyond uncomfortable and bulky to the point I can't talk straight all my words sound like I have a lisp it's so frustrating and many dentists such as mines didn't give me options I never knew there were different types of partial until I did research I only have 4 missing teeth and unfortunately I can't afford the implants
I just turned on subtitles and I change my opinion to I like your video
Thank you for the feedback.
Can you use Valplast or a flexi type to replace four front teeth, and not deal with those metal clasps
Yep just had it done
@@A10TOES but how is eating with them
How about 3 top front teeth from an accident ?
Yes, absoluetly can as long it's not right after the extraction of the teeth.
What do you mean when you say "post immediate case" in reference to Valplast? Is there a specific amount of time a patient should wait after extraction before requesting a Valplast partial?
Yes. You need to wait 6-12 month after the extraction before getting a Valplast partial.
I suppose that’s due to gum shrinkage. I had an upper partial, temporary, and a year later my gums shrinking was substantial, thus I just got my new permanent partial
You should wait 2 month. I waited 5 Werks after extraction. That was too early. Your bone will Hurt what means that you gonna think Valplast does Not fit and Hurts while you are eating.I got Valplast for 3 teeth. 35,36,45. Now I can eat anything and it feels Like my own teeth. But ist Takes time Till you get there.
Is a partial only as good as the original mold from the dentists office?..that is where it all starts..
I'm working in dental lab now.
Do you know why denture resin area turn white after taking out of boiling water and deflask ?
it's really make me mad as dental technician >
So- another case of the content creator not responding at all to comments or questions. I guess they don’t have to, but it would be decent.
Probably, due to the fact not enough acrylic used in the process.
@@stomadentdental5236or possibly incorrect ratio of polymer and monomer mixtures
sir upload video design cast partial
Let's set a few things straight here. We don't want to confuse dentist and patients watching. First....Titanium partials are by no means better than crome cobalt partials. Especially for clasp partials as clasp adjustments are not recommended. Titanium has a terrible elastic modulus in comparison to crome cobald. Second...titanium partials are basically un-repairable or none extendable. Third...print partials shrinkage can be compensated for and be adjusted for fit before casting. Forth....Crome cobalt partials can be milled as well. And fifth......bonding strenght of any veneering material is extremely low on titanium. Furthermore exposed titanium can lose its biocompatibility depending on wear, medications and acidity of the patient. I worked with titanium partials already 20 years ago and would never recommend it for clasp partials. Welding titanium for repair is a pain. Titanium frames are good for internal frames like hybrids, not so much for clasp partials.
Are you a cosmetic dentist can I ask , as I’m getting terrified of what I think I need and no one I’ve seen seems to be honest with me xx
Is a titanium implant a biocompatible material? some dentists claim that only zirconium implant without metal is biocompatible, what is the relationship between the patient's acidity and titanium in the mouth?
Love the overlay voice of Arnold Schwachenneger.
Joke aside, thank you for your informative post.
"Who is your dentist and what does he do"
You are welcome :)!
Can you give me a dentist that you recommend in Riverside County, CA that uses you? I did Valplast for 5 years, I'm done. I need titanium!
Are there any partials that allows us to talk normally my crappy dentist refused to listen to my wants and concerns i made it clear the Acrylic on the roof of my mouth was giving me a hard time to speak properly to the point im talking slurred or like with a lisp
Was this with paid insurance or Medicaid?
How can I get one of these
Have your dentist reach out to us to get started with our lab.
What is best for missing 3 front teeth from an accident ?
In order to make that decision, I would recommend that you go see a dentist or denturist. We can help with suggestions once we can see the impression.
@@stomadentdental5236 I have. The metal partial I have, I cannot stand. I can’t even speak or swallow properly.
Where can I get flexible dentures
Stomadent Dental Lab does flexible partials. You can have your dentist reach out to us to get started, and send your case to us.
I have a natural gap between my front teeth. One front tooth is loose and has to be removed. Can a partial be made to match my original teeth with the gap?
Absolutely, just have your photo included with your original teeth sent to the lab along with the case.
YAY! We can deal with you directly?@@stomadentdental5236
Lose music; we can't hear you.
Question .. I have a upper partial for years i am 59 years old . it is metal , all the partials none have front teeth , is there a reason.
Hi!
So is a metal partial denture a good option?
is your experience good?
Im missing four molars in the upper jaw and Im thinking of using a metal partial denture but I have many doubts and fears.
Can you chew and eat well?
Do the clasps damage your healthy teeth?
Greetings!
Please help me , I need you
Can't understand the explanation because of the music. Anyway, what's the reason why a dentist use different type of material on partial dentures??
I'm not a dentist or an expert but I guess, Dentists use different types of materials for partial dentures to cater to the specific needs and preferences of patients.
@@rienne89 That's right! Kriss says some patients may prioritize aesthetics, while others may focus on comfort or durability.
@@allisondarcy what is kriss?
@@uzmitin Kriss is an AI-powered chatbot designed to enhance communication between dental practices and their patients, improving case acceptance and patient experience.
@@ryanfajardo4364 is that available for free?
Go check out... king house dental... he's a really good doctor he even won 🏆 rewards
whats with the music???????????????
I could not follow this.
GET RID OF THE BACKGROUND MUSIC! PAY ATTENTION!
Why would you have music in background while he's talking? Makes no sense.
Your music is too loud, cant hardly hear you, better now
Why the annoying background music? I can't hear what is being said! I know this is very common but why? It adds nothing to the content.
Thank you for the feedback, I'll let my team know.
Suggestion: Get rid of that background music. Distracting and way too loud. It serves no purpose. Viewers want to hear what you have to say, they don't want to listen to your choice of music. Thanks.
Sorry but everything you said about a conventional partial is incorrect. Conventional is always better than milling and printing.
What the hell are you talking about? 0:49 "The acrylic partials don't fit well because the model gets distorted when processing"? You duplicate the virgin model and process on th duplicate. If you do it digitally the undercuts doesn't disappear by magic. 🤦♂️
Yes, Mr Bezuidenhout, with digital designing the undercuts disappear with one click of a mouse. I recommend you to try it. You'll be amazed.
@@gennadybabichenko9002 I do it both ways, digital and manually in my lab and that is why I ask. Manually you survey the model and block out the the undercuts, duplicate model and so on... I don't think you know what I'm talking about, because that is why your model got distorted? Dear Mr Babichenko, there is no difference to the technique between analogue and digital. It is only the tools! Tool do not make a Master Thecnician! If you need a computer to do everyting for you with a click of a mouse and wow all the undercuts disappear magically? No one understands magic. Do I need to say more?" you must try it Mr Bezuidenhour", it mean that there were something wrong with your technique or qualification.
Thank you for your comments. If you would like to further discuss proper digital design techniques, please call our laboratory and our certified technicians will be happy to share with you additional information.
Sir denture is a froud process i am indian i had denture in india while eating faals i am in problem due to teeth loos denture very bad denture
That loud background music is drowning out the dentist's voice ..very distracting and annoying. I can't watch the whole thing.
Very loud background music- remove it !!
Please remove the background music
That music is so darn annoying.