2011-2019 Challenger 5.7L HEMI JLT Performance Series 2 Cold Air Intake Review & Install
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Subscribe for Daily Challenger Videos: muscle.am/2TXrfwf
Boost the power of the HEMI engine under your Challenger's hood with this roto-molded plastic JLT Performance Series 2 Cold Air Intake with 5" opening for optimized airflow. This tune-free cold air intake is crafted out of high-quality ABS plastic for better cooling and a heat shield to ensure your motor stays cool when idling. www.americanmu...
Item CH2982
MPN# CAI2-DH57-11
----------------------------------------------------------------
Follow American Muscle for all the latest Challenger Content:
Subscribe for Daily Challenger Videos: muscle.am/2TXrfwf
Instagram: / americanmusclechallenger
FaceBook: / americanmusclechallenger
AmericanMuscle.com has the best aftermarket parts for your Dodge Challenger: muscle.am/2ztDN5R
#challenger #jlt #coldairintake
Shop This JLT Cold Air Intake: muscle.am/2Ils50O
Subscribe for Daily Challenger Videos: muscle.am/2TXrfwf
Fun Fact: For removal of the O2 sensor you have to bend the tab back, then turn counter clockwise and pull. Good luck not breaking the tab 😀
Broke the tab. Too bad I didn't read the comments before jumping in
I broke the tab but nothing seems to be wrong so far, car still runs
You guys need more subs. I'll like this vid. Hope it helps. Great vid
We appreciate the kind works! Thanks for watching and feel free to subscribe! We put out videos every week.😁 -Zach
@@AmericanMuscleDodge forsure. I just got my hands on a 2014 challenger rt low miles. 85 mill bbk throttle body and kn air intake straight pipe. Loving it!!!. If you can maybe do some videos on doing oil changes on those cars and things to do to keep the car running good. Like the oil catch can install and general maintenance or additions
It would be more convincing if you showed the differents on a flow bench between the factory and after market
Very helpful. Thanks!
how do i remove the temp sensor??? I'm having trouble
Twist and pull
Awesome and simple! Great vid!! #hailthechallenger
Thanks, Kevin! -Zach
👍🏼👍🏼👍🏼
Can you really get more HP with this without a tune ?
Love the shirt
15 hp? pretty cool..
Right......
15 hp from this?lol. Give me some of that shit you're smoking! You're lucky if you even got anything close to 5 hp from it.
@@brianzaborowski2724 Yeahhh I gotta agree with you on that one. Intakes help with air flow but they sure as hell ain’t gonna get you the 20+ Horsepower that’s advertised on the box 😂
I know this Intake doesn’t require a Tune, but would it work better with one?
Some shops says you get better results with a tune with this CAI
@@terrymitchell4579 Sorry re-type that lol, I didn't understand
@@xMarkie good lordt that was terrible lmao
@@terrymitchell4579 all good bro, I’m glad atleast someone replied to me
@@xMarkie Hallelujah Ameeeeeeen
Wondering why it states 2011-2019 5.7 Challenger and not 2009+? To my understanding its exactly the same motor and engine bay? Can someone clarify if this will work onnthe 09-10 5.7 Challengers?
if the piping diameter is bigger than factory, you need a tune or you lose all your low end torque
FYI- The coolant level on the Challenger behind you looks low.
I just got mines, it doesnt have hole on top is that a change?
Is there an adapter or some kind of duct that can direct air from the headlight intake to the square opening at the front of the heat shield?
Did you ever figure this out?
@@jminkvihubyb I did not sadly.I ended up just letting the air flow through the headlight without a duct then added some mesh screening to the square opening to reduce the amount of debris that could get into the heat shield
Damn that's a fat filter & tube, and looks like it moves allota air through it. Do you have a setup for Challengers with the 6.1 and could share the part # with me, if so ?
Also we are located in the Southwest, so do they have dry filters for those of us in the dusty desert ?
Any one have a video on how to clean
California legal?
As of February they are.
Will it fit in a 90mm throttle body?
Just purchased one of these. Does anyone know how often I should Oil the filter? This will be my first oiled filter. I normally just go dry.
You'll need to re-oil the filter every time you go to clean it. How often you clean the filter will depend on how often you drive your Challenger and what kind of enviorment you're driving in. I recommend checking your filter every oil change, it'll likely need cleaned every 20k miles or once visibly dirty. -Zach
@@AmericanMuscleDodge Cool. Thanks alot.
Does this make your car louder
A little bit! Air intake kits like these will give you more air-induction sounds when you step on the gas. -Zach
no dyno test?
lol You mean proving HP gains. That's never going to happen
😅
Bought this from you guys for my 2011 mopar charger it does not fit. Damn hood would not close. Currently returning it and waiting on my refund.
I got one for my 6.1 Hemi does it require a tune
This specific intake system does *not* require a tune. I highly recommend you check on your specific part number to see if one is required though. -Zach
Tune that baby to e85 and put cams on it it’ll be such a beast.
Will it fit a 2018 5.7 charger?
Yes they will but are model specific.
bogee1cav RT
Order this part number CAI2-DH57-11
This fits all 5.7 Challengers, Chargers and Chrysler 300's from 2011-2020. They only differ if you have a 6.1 or 6.4.
Will this work for a 05-06 Chrysler 300? Plz respond
Maybe! I would highly recommend checking with K&N directly to confirm fitment. We can't guarantee anything since we do not carry parts for those Chryslers. -Zach
Will a headlight inlet duct tube work with this?
It works w the afe cold air Intake for the v6
will this void my warranty ?
Yes
No. It won’t.
nope
@@germandelariva3754 lmfao no it wont
My hood wont close all the way, now i have a 1/8 - 1/4 inch gap on the intake side
Have you found any way to fix this ?
I too have this problem. What did you use to trim the box down?
@@Op-qk9sg honestly bought another intake but you could trim the botton to where itll sit lower
@@elsavageo9202 i didnt trim mine, ended up buying another cause i have a 90mm throttlebody
Needs a tune or not?
No tune required with this intake kit! -Zach
Is this available for California?
Nothings available for california, everything is illegal there. 🙃
Does it sound different?
You will get a little more induction noise with this cold air intake whenever you press on the throttle! -Zach
@@AmericanMuscleDodge was hoping for a lot more noise :-D
13 minutes of talking !!!!