Craftsman 22" Walk Behind Trimmer
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2019
- Oil Change & Throttle Cable Replacement
Today we'll be working on a Craftsman 22" Walk Behind Trimmer.
Model: 944.361160
Engine: 126T02-1377-B1
My customer mentioned that the engine would only run on low idle, so they most likely tried to push the throttle lever harder (which is why the throttle cable probably broke).
The low engine RPM is usually caused by the Governor spring post being pushed back (which puts less tension on the spring).
This is usually caused by running into something when mowing under a deck or a trailer.
It's an easy adjustment & we were able to solve that issue easily.
We then change the oil & replace the throttle cable.
(I didn't receive the replacement throttle cable in time to finish this video, so I rigged the old one to work so I could finish filming).
Throttle Cable: STENS 290-747 or AYP417238, 586861201
Husqvarna 532417238
Air Filter: STENS 102-549 or 491588S
Oil: 20oz or SAE 30
Spark Plug: RJ19LM
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
SOCIAL MEDIA:
/ eliminatorperformance
/ eliminatorperf
/ eliminatorperformance
2ND CHANNEL:
EP Vlogs: / @eliminatorperformance...
GEAR:
Camera: amzn.to/2HVkW9o
Tripod: amzn.to/2HGWt4w
Microphone: amzn.to/2J7k9DA
Cheap Mic: amzn.to/2xCBn6z
Headphones: amzn.to/2JeHUG9
Editing Software: amzn.to/2JD7OTx
Photoshop: amzn.to/2HBY6Ez
DONATE:
Bitcoin: 1NYgPvcvBWuhGRewsLE4Scy1cbzwndh5hZ
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks - แนวปฏิบัติและการใช้ชีวิต
For anyone who requested how to replace the belt: th-cam.com/video/m0xmZD058L0/w-d-xo.html
Hey , thanks for the video, was working on my neighbour's trimmer and i was stumped. You saved me a lot of time.
Thank you, great video
My WBT was running wide open but the linkage appeared to be working properly. After seeing you bend the arm I realized that my problem was the reverse of yours. Bent it to the rear of the machine and the governor worked again. I subscribed as soon as I got back to the computer. Thanks.
Spark plug boot problem is a new to me. Thanks for that!
Thanks for watching!
You saved me with the governor tab being bent . Thanks!
Thanks for watching!
Nice repair ride along. Subscribed. Comment and like. Looking forward to watching more!
Thank for the info. like allway a GREAT job. keep up the great work.
Bob
Thanks for watching Bob!
Excellent video! Thanks
Very informative video. 👍
Nice fix, thanks for the video.
Thanks for watching!
Good day Interesting video. I always thought engines run around 3200-3600, but never knew torque was at 2600. Thanks for now. They do work nice.
They work great!
To change the oil there is a bolt 🔩 underneath so you can drain it fully .
Great info, thanks. That was why my trimmer wasn't choking. The throttle cable control housing had slipped and wasn't engaging. The little sleeve holding the rubber tubing in place had come undone and had to be crimped back onto the tubing inside the control lever housing.
Nice fix ty!!!!!
Thanks for watching Bruce!
Hay That Was Our First Time To Watch You & it Was Excellent , We Just Got One Just Like That One, & I Had To Get it Running & Never Had One Before So Thanks ,So Well Check You Out Some More 👍👍👍it would be great if you told and showed the best kind of line how much to use etc. and any does and don't you know about.
The part that is in the front bottom below the plastic cutters
Excellent video. I’m glad I came across it. I have a question that I hope you can answer. I actually have two of these machines, one is brand new but it’s missing some parts. That bottom handle that the upper handle attaches to where it has the two silver grip things and that silver steel rod running from one side to the other, I’m missing that lower handle and I missing one of those gripping device things. I don’t know what they’re called. I also need to replace the mount where the cutting string attaches to as one of the clips that holds the string is broken off on one of them. Where can I buy parts for these? Any idea? In your video you said you listed all part numbers below, but I guess I’m trying to look at the forest through the trees and I can’t see it, lol any help would be appreciated.
Beautiful, checked out the power curve you showed and looks like the 6.75 ftlbs (engine spec.) torque is around 3100 to 3200 rpm so you are right on the money and the machine sounds great at high rpm.
Thanks for watching!
I have found that there are several carbs for the string mower and the connections are different. I finally found instructions for the one I have and it works fine. Hard restarting when hot. Possibly new coil??? Coil resistance seems stable.
Check resistance on spark plug cap, I had one over 10k ohms of resistance and spark failed when hot. th-cam.com/video/ejAX6Bn4WSo/w-d-xo.html
That's sick never seen on of those before hahah
They work incredibly well lol
Looks like I missed the part I was looking for. How do you actually remove and replace a broken throttle cable?
Hey i got the same one but for some reason it doesn't want to shut off any reason? Have to pull the spark plug to shut it
Thanks sir
Thanks for watching!
Can you tell what the other spring on the opposite side of carburetor is for?
A friend has one of these. Engine was slightly smoking on it. Let me know the exact type of air filter on it and if it needs either more oil (or an oil change). Thanks.
What stops that throttle tab from vibrating back into the low rpm range? I have a metal Topside oil extractor like that. ... Love it.
Usually there's enough resistance on it to prevent that, thanks for watching!
Good content!
Do yourself and your customer a favor and invest in a pressure washer and clean your machines. It saves you from getting nasty dirty and your clients will enjoy it also.
I clean all of them because I hate working on dirty equipment and it’s other 10.00 bucks also
Hi. I need a video to show how to replace the belt. Thanx.
Interested in your touch tach. Model and availability.
I have weed eater 22 eagle how long should I clean the carb for in the cleaning I did 5 min how long would you clean it for
Thank you for the upload....is it possible to create a video showing how to replace the belt? I have a Craftsman 22 Walk Trimmer as well.
This was a customers and I no longer have it, if one ever comes in needing a belt I'll be sure to film it!
th-cam.com/video/m0xmZD058L0/w-d-xo.html
What is the model # on the carburetor for this craftsman? I want to buy one or at least something that's compatible for my craftsman trimmer. Would you have this information for me , I'd really appreciate it if you did.
Where did you get pump from
In your case was the throttle cable in the way of getting the air cleaner cover off. Just picked up a used one, and mine is.
I removed the screw on top and to the front to the little linkage cover and the one screw of the filter cover. Then I used a small pliers to crimp the black plastic tip of the cable tubing so it backed up thru the little metal half circle, then it was out of the way of the filter cover. The filter cover has just a couple of bottom tabs and you can wiggle the cover up. The cable tubing and wire is easy to push back thru the metal semicircle bracket. It will still be attached at the wire linkage, no need to take it off there. I had the throttle in the off position when I did that.
what about a metal or poly blade to really rip thru weeds?
I need to know how to fix the cable to the trimmer head, it's disconnected underneath
th-cam.com/video/m0xmZD058L0/w-d-xo.html
Don't know why my belt keep falling off in the front when using a correct new belt. Any idea what to look for?
Check to make sure you have a belt keeper installed, some fall off when the bolt that holds them on loosen off.
Where would I be able to buy a craftsman like the one shown in the video ? I’ve been looking online and can’t find it. If anyone knows I would appreciate if you can help me find it !
You can't buy Craftsman anymore as they declared bankruptcy, but you may be able to get them in the US still.
Cub Cadet makes these walk behind trimmers though, you could check that out, they are owned by MTD so essentially the same as this Craftsman!
I bought two from Sears
I need bumper cap.
What size belt size does that specific model use? Thanks
th-cam.com/video/m0xmZD058L0/w-d-xo.html
i put 2 cycle oil in will this ruin my trimmer? I have this exact trimmer.
Drain it and you’ll be ok
Hello I have one of these but my engagement cable is broke could you please tell me the part number for it thank you so much
# 181699, do me a favor and leave me a Google review if you could, I'd really appreciate it!
@@EliminatorPerformance ok I will thanks again
@@EliminatorPerformance i just now posted a positive review
@@conner5611 hey thanks so much, really appreciate it!
@@EliminatorPerformance no prob your welcome
Can you show me the belt replacement diagram
th-cam.com/video/m0xmZD058L0/w-d-xo.html
Do anyone know the replacement part number for the belt
Yes, Craftsman 185476 v belt
th-cam.com/video/m0xmZD058L0/w-d-xo.html
none of yall mention the compression on these machines. what kinda small engine techs r yall.
My nieghbor has the same model. The string is not engaging. It starts fine / been sitting up for 3 yrs and he fixin to sell it. Don't no nothing about these things.