You are not just good with what you do do. You are also humble. You admitted you don't know what the component is and people with the knowledge about it were eager to give you the info. This is how keep on learning. Respect Boss.
The "5X" IC is a RT6575DGQW (RT6575D QFN-20 IC Chip) DC/DC Step Down Controller - if you have an issue sourcing, I have a spare here in the UK I can send to you
Your videos never get old, something new every time. Recently I perform microsoldring in a flex cable 3mm flex having 15 wires I sold it perfectly without microscope because my hands are perfectly still but I didn't have solder mask I solder one side other side get desolded only by touching iron on another side for fraction of sec.
Brother Assalam o Aliakum I m an Engineering Student and I m inspired from Your Hard Work I like Hard working people like you, Lots of Respect From Pakistan
Hey,it is richtek RT6575C/D. What you have here is probably shorted kbc multicontroler which is powered from that 3.3v ldo line.Very typical case,so before removing that regulator,inject 3.3v into ldo line and watch for heating spots on board,kbc the most.Good luck
A very stupid question for sure for all the experienced people we all have been there, but which lead he has when testing the capacitors? Negative or positive? If negative where is he touching the positive? Because all i know it's capacitors are read in Faraday. Thanks a lot for your help.
From what I see it is a synchronous dc/dc step down converter providing 3.3v and 5v . The only supplier i found was a couple of eBay listings so you may need to find donor boards to find this ic.
Not 100% sure but i would guess its a -RT8249A/B/C - Dual-Channel Synchronous DC/DC Step-Down Controller with 5V/3.3V LDOs. but check the datasheet and pinouts as it comes in a few packages.
@@christozed i do not understand. This IC on this video is a StepDown Controller IC. It makes the 3,3Volt and 5Volt. 3,3Volt goes to EC (Embedded Controller, Super I/O, starter IC whatewer) it is also an IC (Integrated Circuit).
I am having a battle with HP Omen laptop. Looks like the Richtek L8 on it has similar problems as the device wont start and just blinks shortly while pushing the power button. I am looking forward for Part II.
Hello Dear NorthridgeFix, I was watching for some iPhone repair, and got along with other of your videos! YOU ROCK!!! I'm addicted to your videos now:D Best regards from tiny country of Slovenia -> Where your ex 1st lady was born
It is up en down mosfet driver it give the gate the voltage to open .it is used in many laptops from the same generation, ik u have damaged motheroboard u can find one. Thank you very mutch for all your very goed videos i learn mutch ,
thermal camera very rarely used by repair shop in my country because of the price, some using what they call MBR (high current 5-10A) to find fault component
You are awesome and I wish you lived NY, you would put all of these techs to shame! Great channel and enjoy the holidays. Best regards to you and yours!
If you give the motherboard number i will try to get the schematic, thats if the 3.3 v dc ic buck controller, but somethimes if not the ic, i suggest to remove the coil and see whats line have the short, im think is pl301.
Hi, Thanks for the great videos you make! Got one question that i hope you can answer for me. What temperature do you use on the soldering iron? Thanks alot :)
I have an asus 403n motherboard with a pwm controller that has similar marks, except mine says 2N=3L E3U. According to boardview its name is "PWM CONTROLLER RT8249CGQW RICHTEK WQFN-20L"
You should spend more time on it,remove that 3.3/5 volts voltage regulator ic and Check for short again on that cap to find if the short comes from ic or 3.3 volt rail (or 5 volt rail).of course if there is a short under 3.3 volts rail Power suply (that 5×=6f ic)has to be hot.
@@NorthridgeFix wow....now that is dedication to your craft. Not many shops would/could spring for a $1-4K piece of test equipment. Although, the better the tools (and knowledge how to use it), the better the repair.
I've found the manifacturer. Search for Richtek 5X. According to documenr that I've found, 5X is Product Code and 5FM1N is Date Code. You can find that file by searching DS8249-ABC.pdf and look for Marking Information on second page.
Its very cheap brother 🌝 www.ebay.com/itm/NEW-FLIR-E4-WIFI-Thermal-Camera-Upgraded-to-E8-Specs-320x240-MSX-Adv-Menu-/192789012617?_trksid=p2349624.m46890.l49292
You are not just good with what you do do. You are also humble. You admitted you don't know what the component is and people with the knowledge about it were eager to give you the info. This is how keep on learning. Respect Boss.
The "5X" IC is a RT6575DGQW (RT6575D QFN-20 IC Chip) DC/DC Step Down Controller - if you have an issue sourcing, I have a spare here in the UK I can send to you
@Bishtuku The thermal camera he is using is the FLIR E60. It is a discontinued model
Teamwork! 👍
Your videos never get old, something new every time.
Recently I perform microsoldring in a flex cable 3mm flex having 15 wires I sold it perfectly without microscope because my hands are perfectly still but I didn't have solder mask I solder one side other side get desolded only by touching iron on another side for fraction of sec.
that ic 5x its step down controler providing 3.3v and 5v..its a richtek ic 5x= RT6575DGQW
www.richtek.com/assets/product_file/RT6575C=RT6575D/DS6575CD-01.pdf ( pin layouts for the chip also credit to Mushini )
How van we figure it out ? Is there any website that can help ?
Well done
Brother Assalam o Aliakum
I m an Engineering Student and I m inspired from Your Hard Work
I like Hard working people like you, Lots of Respect From Pakistan
Hey,it is richtek RT6575C/D. What you have here is probably shorted kbc multicontroler which is powered from that 3.3v ldo line.Very typical case,so before removing that regulator,inject 3.3v into ldo line and watch for heating spots on board,kbc the most.Good luck
5X = RT6575DGQW 👍
5Y = RT6575CGQW 👎
@@hightttech both compatible for this board
@@hightttech how did you find out what IC was on the board? The markings were "5X = 5N M1N" so you don't have to rewatch
a nice idea and not wasting the time but sorry i am new in repair and do not know what is the ldo
@@sarockpashotan it means low dropout
A very stupid question for sure for all the experienced people we all have been there, but which lead he has when testing the capacitors? Negative or positive? If negative where is he touching the positive? Because all i know it's capacitors are read in Faraday. Thanks a lot for your help.
I am glad you found the issue. 😁😁😁 other shops here were trying to junk the whole motherboard. I try not to be wasteful. I knew you would find it.
It finally gets interesting. I'm looking forward to part 2.
Can you do a walk through of the tools on your workbench. Would love to see what you use.
He may be quite busy and he cannot afford waste time to come with walktthrough bench area setup.🙄
From what I see it is a synchronous dc/dc step down converter providing 3.3v and 5v . The only supplier i found was a couple of eBay listings so you may need to find donor boards to find this ic.
Not 100% sure but i would guess its a -RT8249A/B/C - Dual-Channel Synchronous DC/DC Step-Down Controller
with 5V/3.3V LDOs. but check the datasheet and pinouts as it comes in a few packages.
NO. "RT8249A/B/C" would be marked "2Q=" or "2P=" or "2N=" ... chip in video is "5x="
Interesting.. now i know where to go for repairs.. im just few blocks away from your shop lol i live in Northridge
Love watching how you work and find problems... Keep up master😊
Hi , Great video, What thermal camera is it that you use?
RT6575A/B is a dual-channel step-down controller
Open the jumper PJ304 and see if the short circuit disappears. It could be the EC is dead and not the StepDown.
IC
@@christozed EC=Embedded Controller. It gets its power through the jumper from StepDown. If the EC is shorted, the StepDown IC goes hot.
@@SiETechNotebookReparatur
IC for step down voltage for cpu, ram, I/O blah blah
@@christozed i do not understand. This IC on this video is a StepDown Controller IC. It makes the 3,3Volt and 5Volt. 3,3Volt goes to EC (Embedded Controller, Super I/O, starter IC whatewer) it is also an IC (Integrated Circuit).
@@SiETechNotebookReparatur maybe not the IC.
The problem is that it can't release the voltage out.
3 leg is the "feedback" for 3.3volt
I am having a battle with HP Omen laptop. Looks like the Richtek L8 on it has similar problems as the device wont start and just blinks shortly while pushing the power button.
I am looking forward for Part II.
Hello Dear NorthridgeFix, I was watching for some iPhone repair, and got along with other of your videos! YOU ROCK!!! I'm addicted to your videos now:D Best regards from tiny country of Slovenia -> Where your ex 1st lady was born
It is up en down mosfet driver it give the gate the voltage to open .it is used in many laptops from the same generation, ik u have damaged motheroboard u can find one. Thank you very mutch for all your very goed videos i learn mutch ,
Great trouble shooting techniques. Always like seeing you work thru the problem. 😁
Love your videos & solder talents.
It's a Single Synchronous Buck Controller.
Always a crowd pleaser when you whip out the thermal camera! Its so cool
thermal camera very rarely used by repair shop in my country because of the price, some using what they call MBR (high current 5-10A) to find fault component
Hey , can you post what thermal camera and microscope your are using in your shop?
Just got my order in from your shop and can't wait to get started practicing micro soldering. I appreciate all that you do!
You are awesome and I wish you lived NY, you would put all of these techs to shame! Great channel and enjoy the holidays. Best regards to you and yours!
Isnt Rossman in NY?
@@kristianjozef3198 he is currently going to be putting his.long rants to good use melting the new york city.snow.
Which thermal cam that you are using can you mention brand and model
Hi Alex Steve from belgium you can use tps51225c for your ic. It is the equivalent for 5X =RT6575DGQW
Would you please share the Thermal camera model no./specification sir?
If you give the motherboard number i will try to get the schematic, thats if the 3.3 v dc ic buck controller, but somethimes if not the ic, i suggest to remove the coil and see whats line have the short, im think is pl301.
what setting is used to test for capacitor shorts? The diode check?
Hi, Thanks for the great videos you make! Got one question that i hope you can answer for me. What temperature do you use on the soldering iron? Thanks alot :)
700 C is the right temperature..
Nice job, you found the problem very fast. Thats the way it should go. Such a thermal-cam is like a helping hand.👍
i bet that its the 3v and 5v power supply buck converter ic
wow that thermal looks awesome. Great quality.
Watching here from Doha Qatar😊😊
I'm an electronic student, which thermal camera do you suggest to start ??
what about a fluke Ti480 , does it good for electronic repairing ???
Hello Mr.______
WHICH CAM MICROSCOPE CAMERA YOU ARE USING
He sells them on his website. Lots of them.
I have an asus 403n motherboard with a pwm controller that has similar marks, except mine says 2N=3L E3U.
According to boardview its name is "PWM CONTROLLER RT8249CGQW
RICHTEK WQFN-20L"
Close. But "RT8249A/B/C" would be marked "2Q=" or "2P=" or "2N=" ... chip in video is "5x="
Anakartın şemasından PU301 numaralı componentin şemasını bulabilirsiniz. IC yi değiştirince sorun çözülecektir.
Türkçe anlamayabilir
انت مبدع ربي يحفظك و يوفقك
what tester are u using?
When he is testing the components after using the thermal camera, does he leave the board plugged into power? and testing in diode mode?
Sir me need thermal plz tell me how much and how buy in India ❤️ very useful your all videos 👍❤️❤️🙏
sir didn't you use flir MSX feature?
ಅದ್ಭುತವಾದ ಸುಂದರವಾದ ವಿಡಿಯೋ ❤️😍✋👌 amazing and beautiful video ❤️🌹🙏
love seeing your vids.. learn new stuff every time
is there a thermal imaging camera that you recommend??
you can use your smartphone
@@kkrott87 how?
@@AravindSniper google phone thermal camera
بارك الله فيك وجزاك الله خيرا كثيرا.
It is beautiful about your advanced insight ! thanks a lot..
You should spend more time on it,remove that 3.3/5 volts voltage regulator ic and Check for short again on that cap to find if the short comes from ic or 3.3 volt rail (or 5 volt rail).of course if there is a short under 3.3 volts rail Power suply (that 5×=6f ic)has to be hot.
a nice method!!!
thats very very useful thanks man.
Hii,you can write the model of termal camera ,thanks for all video
Nice video sir it's DC to dc regular IC.
How did you test the last capacitor? Please explain.
Hello sir,
do you clean motherboard desktop and laptop use water ?
Isopropyl alcohol
can we detect any shorts with thermalcam? as a learner will it be easier for me?
Great 👌
I'm waiting for next video
greetings, what is the model of the thermal camera?
rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dm570.l1313%26_nkw%3Dflir%2Be60%26_sacat%3D0%26LH_TitleDesc%3D0%26_osacat%3D0%26_odkw%3Dcannon%2Bpancake%2B40mm&campid=5338440312&toolid=20008
@@NorthridgeFix wow....now that is dedication to your craft. Not many shops would/could spring for a $1-4K piece of test equipment. Although, the better the tools (and knowledge how to use it), the better the repair.
If the cap was the problem.. which is the value for that component ? Regards Alex italy.
is there a part 2 for this video?
Thanku ❤️👍👍👍❤️❤️🙏❤️
good sir 👍👍👍👍
I've found the manifacturer. Search for Richtek 5X. According to documenr that I've found, 5X is Product Code and 5FM1N is Date Code. You can find that file by searching DS8249-ABC.pdf and look for Marking Information on second page.
And also found RT6575D which is 5X but I don't know if it is suitable for that motherboard
Close, but "RT8249A/B/C" would be marked "2Q=" or "2P=" or "2N=" ... chip in video is "5x="
@@BirhanDursun: datasheet indicates same chip 👍
Great job, you are the best. Selam from Bosnia and Herzegovina
This is IS Dual-Channel Synchronous DC/DC Step-Down Controller
with 5V/3.3V LDOs
Love your vids man keep the content coming
I have some 5x=5A ic
That ic 5x its step down controler providing 3.3v and 5v..its a richtek ic 5x= RT6575DGQW
love from INDIA🇮🇳
this comment is stolen from the Japanese dude up there
shame on you man
@@ahmidiyasser376 thanks bro❤️
Its a step down controller.
5X = Product Code
5FM1N = Is the product Date Code
5X is RT6575 QFN-20 IC Chip ( Product code)
Awesome ✌🏻✌🏻✌🏻
Nice try👍👍👍
It is RT6575D chip
No Hiroshima bomb here.....🤣🤣🤣🤣
Can I know what microscopic cam are you using
northridgefix.com/product/microscope-camera-bundle-1080-60fps-180x-lens-ring-adapter-2-barlow-lenses-0-5x-0-75x/
Thanks
That Chip is Dual Channel DC/DC, Synchronous Controller...
Hurt your brain by thinking 😂
Super hard work thkyou sir
I also done one laptop shorted with I/O ic andu another one with ic connected to usb socket
Best part No Hiroshima bomb here.....🤣🤣🤣🤣 hahaha
I think that ic is corrosion your opinion sir
Thank you👍
What if the component you are replacing is not the main cause of the fault, but a side effect?
Amazing content
it a
ISL62386 Dual-Channel Synchronous DC/DC Step-Down Controller ...
Go through schematic of the board u will find the chip no. There 👍
If we have to find it, we need more info about MB 😉
I think this is Dual-Channel Synchronous DC/DC Step-Down Controller
Awesome
northridge fix thx for heart i want to restore my acer tab b1 711 but i am in india
how could i do
You need to look for mother number and IC number on the board is PU310 you probably have to find it with that information
i asked this a dozen times:
why there is no link to the flir cam AND which model is it?
Find a micro usb flir camera for cheap. All you need is a Android mobile. That's enough
Its very cheap brother 🌝
www.ebay.com/itm/NEW-FLIR-E4-WIFI-Thermal-Camera-Upgraded-to-E8-Specs-320x240-MSX-Adv-Menu-/192789012617?_trksid=p2349624.m46890.l49292
FLIR TG165 - google it.
@@techworld5272 thx mate :)
Flir E60 rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dm570.l1313%26_nkw%3Dflir%2Be60%2Bthermal%2Bimager%26_sacat%3D0%26LH_TitleDesc%3D0%26_osacat%3D0%26_odkw%3Dflir%2B360%2Bthermal%2Bimager&campid=5338440312&toolid=20008
Sir it may be logic controller ic
Dual-Channel Synchronous DC/DC Step-Down Controller
👍👍👍👍👍
RT6575C/D from richtek
Thankfully my HP laptop powers on and works but the only issue is the battery that is draining fast.
its a DC/DC controller