So keep in mind I did this test WITHOUT any oil. When you buy nut butter in the store, it doesn't have ADDED oil, so I figure why add it to the recipe. Want me to do a future video tested it with oil? It would probably work.
I don't know why companies make blenders with only a blade at the bottom and don't instead make a spiral blade that extends almost to the top of the container. That seems to me like a big design flaw because food has to either be shaken or rearranged to reach the blade and be fully blended to a creamy consistency. I have a Magic Bullet and it does OK for liquids but not great on anything dry. Doing smaller amounts at a time and then scooping them out into the jar you're going to keep the butter in will work. It just takes a bit longer.
A regular food processor makes great nut butters. I just add the nuts, turn it on, walk away, come back in 5 minutes, and I have my butter. Mine is a Kitchenaid, and it’s always on the counter.
This is my second Magic bullet, and I have to admit that for the price it delivers really well th-cam.com/users/postUgkxCKuMxLnvr6fJd_M4SE-n7trcGj3zEUHq Considering that there are other products twice and even four times more expensive, I think that for one person this is just right. The only problem is that you have to make sure that your vegetables and ice are cut into small pieces because it won't chop and blend well. I made the mistake of putting whole baby carrots with a cup of mixed greens, and it wasn't pretty.. Also be careful not to overfill it, because it will overflow. As long as you follow the manufacturer's instructions for use, you should be happy with this purchase.
The problems with the bigger blenders though... you have to make a lot for the blades to make good contact, then digging the contents out without wasting half of what you made. I don't know which is more frustrating.
This was the perfect review video! Exactly what I needed. Everything else on TH-cam on the subject isn't good enough to allow you to make a definitive decision. Thank you for taking the time to make this!
Stopped at 2:25 to comment. That Nutribullet spinning wildly and then catching is extremely hard on the motor and bearings and the blades! Then the fact that it really didn't do a very good job and needed constant adjustment! After also watching the Ninja, I am not impressed at all with either of these. I'm glad I watched this video. At least I now know what not to buy. Thanks
Yes! These definitely have their place but my Vitamix will liquefy nuts into butter in just a couple of minutes. It has a tool to push everything down when it goes to the sides. I roast pecans, add dates or date sugar and a pinch of Himalayan salt. Delicious! Roasted cashews with organic unsweetened coconut, salt also delicious 😋 Going to try walnuts with maple and cinnamon.
Almond butter is one of the hardest butters to make , even with a blender that has 2.2hp the consistency of almond butter is much more dense and thick than lets say than peanut butter. the type of blenders this guy is using is very limited to what it can do
The larger diameter canister can’t keep the powdery nut material within the path of the Ninja’s blade. Neither machine does that well as they are being used here. I would try adding slightly warm water (95 F) for processing; when completed, dump into an open wide mouth container (jar) and let the excess water evaporate out...stirring it several times daily until I achieved the ‘butter’ consistency I wanted. Be sure it doesn’t get rancid or contaminated, infested!
Hi Joe, I dont own a NutriBullet, Ninja nor food processor (I just have other kitchen gadgets & appliances) like a regular blender...but anyway, as I mentioned in another one of your posts I kinda do wanna buy a Magic Bullet / NutriBullet but I would really like to know if it can crush those bigger size ICE CUBES but also... Id love to know how to make NUT MILKS rather than P.B. cuz I use more nut milks than PB (which I have the dry kind, mixes with water and it's A LOT less fat) than typical PB. Thank you! :)
I have a ninja that has the nut butter setting and pretty much I press the button and walk away come back and there's nut butter where my nuts just were. I think if you want to make nut butters you should go with a different ninja. That one is maybe meant for more liquid based items.
Well I suppose it's a good thing I didn't try to blend the nuts with the Nutribullet! The almond powder they made in the beginning might be useful for toppings though.
Yeah - the powder was super easy. I was able to make the nut butter, but I can't imagine that it's good for the blender and/or safe since the heat is building up.
All you to do is pulse the machine which reduces the heat and the butter will come. The Nutribullet 600 watt has a flat blade that is specifically designed for grinding. You can also buy this blade separately for the Pro 900 watt.
Simply stated, regardless of the size of the blender you can not make a small amount. The fuller the blender, the better the results. I'm pretty sure that if he had doubled the amount, both blenders would have done a much better job.
I think a little bit of water added, instead of oil, would make for a smoother result, without changing the consistency or taste very much, & not add any high calories, that are in oil.
I have seen pistachio paste for ice cream being made, and he used a mini chopper/mini foodprocessor. There were no stirring, shaking, no nothing, it just made pistachio paste. It took a while, but the machine did it. So I guess a blender is not suitable for the task, it must be a mini chopper.
Pistachios are also a softer than almonds so that could be part of it. Some nuts are way easier to turn into nut butter :) But yeah - the big blades on the food processors are also an advantage if you don't have a tamper or Twister Jar on the Blendtec.
What the hell you doing , you keep doing the same thing over and over and expecting different results, Slow it down and pulse it man , Nut butter isn't made by blitzing the hell out of nuts , They crush and blend the nuts , just do it slowly and you will have fantastic results , good luck☘️
Hi sorry to bother you,what type of grinder do you think or know would be great for grinding dry stuff.Im grinding at a mill and it's expensive,want to get one I can grind at home with. Thanks
Lol it's centrifugal force, man. The blades on the ninja go too fast at a sustained speed for the nuts to come into contact with them... should have used the pulse button to keep the blade speed under control.
Great video. Thanks! Maybe you could compare the ease of cleaning each of the blenders/blender blades. I’ve heard some pretty bad things about cleaning the blades. It would be nice to hear from someone who uses them in a more professional capacity.
Neither of these are designed for nut butters. Perhaps you could have compared blending guacamole ingredients or bruschetta ingredients or something like that, and they both would have been equal.
I have used both of these blenders. I don't know if it makes a difference, but at 5:16 and again at 6:13 you did not lock the ninja into place by turning it to the right, so it was just sitting on the base. Perhaps that is why the nuts would not hit the blade.
I do mine in a food processor but honestly I think it still gives trouble I have to end up adding some kind of nut oil otherwise I'd be waiting all day.. Also the nuts become warm and steam comes out which idk if those machines can take so I have to keep stopping and allowing to cool down. Maybe my processor is lame 🤷♀️
Probably, as she did put some raw carrots in, in her demonstration. However, they need to be diced up first, & blended with water or broth, to not strain the machine.
Actually, I would have preferred an Unfair advantage where you used the Ninja Auto-IQ cycle to gain the edge in your demo Excercise. Or maybe it would still fail? But that's the real challenge. Which one would make the Almond Butter in the shortest time? So that would really be the true Winner. Thank you.
@@giulias.5104 I never roasted almonds, although I buy them roasted at the store. I don't know if it's the same thing. I'll have to watch youtube videos on roasting them as I've never roasted anything. Thank you for your idea!
@@dimwitsadvocate6264You're welcome! I don't know if it would works though. ...Usually people who sprout the almonds, then dehidratate them, which is better for your health than roasting, but you need to invest in a dehidrator. Roasting unsoaked nuts in general it's super simple, they roast quickly, few minutes on a medium temperature oven. Let me know if it worked, if you do the almond-butter and remember about this post. (I can't help because I am away from my nutribullet at the moment.. 😥). Happy butter 😘
Carol Binnie I had a ninja, and it broke it started smoking and I had only had t for 1 year and didn’t use it that often.... and I was only blending strawberries that weren’t frozen or anything and now I have a nutri bullet and it is way better
Olivia Anders after all the horror stories regarding the Nutri Bullet , I'd never have that. I personally love my Ninja , & I love the fact mine's also makes pastry for cookies pies etc also.There's a LOT more Ninja can do that the bullet simply cannot do.
I say for nut Butters (raw or roasted)hang both of these up! Too much work when it shouldn't be that much work. For a nut butter I throw my nuts & salt into my 14 cup KitchenAid food processor. Then Walk away :-) When you come back you have a nut butter :-)
My 600W Bullet of 5 years finally broke recently. Good timing for mother's day :). Hence I am now looking at both Bullet 900W and Ninja 1000W Auto IQ BL480. The Bullet 900W with 10 pieces packaging is only $99 and the Ninja 1000W Auto IQ BL480 is $139. Bullet is meant for making smoothies, convenient and small. If you want your Bullet to last longer you've got to follow instructions closely, it needs LTC :). However, the reason I am looking at Ninja is because it has more features, the auto and pulse and their cups are made of polycarbonate material. In addition Ninja is able to crash ice into snow. Ninja is heavier and a bit more bulky than Bullet. Ninja BL480 $139 is clearing this model as they have launched a newer generation and Bullet 900W for $99 is value for money. I already have a bulky Braun blender so which one should I get?
Ninja, with the auto IQ model you can use the pulse setting to make nut butter, you don't consistently blend like in this video hahaha, it can blend nuts and seeds, crush ice and frozen fruit and gives you a recipe book it also counts down so you know when it is done, I have one and it's amazing
Ummm had you put some coconut oil or honey at the beginning...maybe they wouldn't be clumping and sticking to the sides. Telling me NOT to buy one of these personal blenders. And just spend a few hundred dollars more and buy a Vitamix. And actually a "cert refurb" unit IS sort of expensive. Maybe within a $100 from a new unit...at least on Amazon...
I'm here looking at this video & comments because I just got a 1000 W Ninja With all 3 containers , in 3 different sizes, base unit, , blades & 2 drink tops for only $4.99! I wasn't even looking for one, but the worker literally set each piece on an empty shelf right in front of me! 2 seconds after he left, I scooped the whole set up. So I'm here, learning how to use it. So, try looking in thrift stores. It's not all junk there. Sometimes people move & get rid of their stuff, get a newer model, or don't like the presents people give them. Why pay more than you have to? Then, if it dies, you only lost a tiny bit of money.
@@josefinapaje8220 You can use the mill blade to make flours, grind coffee beans, etc. It is still my understanding that it isn't supposed to be used for butters. Nutribullet doesn't provide a mill blade with the 900 and they state it's not needed with 900 due to the motor size. Another youtuber called them and did a video on making oat flour with the 900's provided extractor blade.
Did he seriously say a refurbished Vitamix isn't that much more expensive than one of those blenders?? A nutribullet pro is about $90 and a refurbished Vitamix is $329! I'll just add some oil to the nuts and have some patience instead 🙄🙄
So keep in mind I did this test WITHOUT any oil. When you buy nut butter in the store, it doesn't have ADDED oil, so I figure why add it to the recipe.
Want me to do a future video tested it with oil? It would probably work.
Please do!
M
Vitamix all the way.
Why do you tight the cap on the nonja too much you dont need to just nip it do not over tighten
Hola
What is wrong with me .2am in the night i am watching a random guy testing two blenders.🙄🙄
Me too and is 2 am on the dot 😂
1:52 am rn lmao
Don't feel bad bro, he was probably doing the test at 4am, I think we're all a bit stressed at this point...blessings to U friend.
Just grab it!
Make a smoothie now..
Thanks for the honesty to show us this kind of blenders don’t work before I tried, I really appreciate you sir .
Nutribullet is the best ... i am using one every day since 11 years still working well
I don't know why companies make blenders with only a blade at the bottom and don't instead make a spiral blade that extends almost to the top of the container. That seems to me like a big design flaw because food has to either be shaken or rearranged to reach the blade and be fully blended to a creamy consistency. I have a Magic Bullet and it does OK for liquids but not great on anything dry. Doing smaller amounts at a time and then scooping them out into the jar you're going to keep the butter in will work. It just takes a bit longer.
I guess these small ones were made for fruits and liquids and not solids and especially not butters
A regular food processor makes great nut butters. I just add the nuts, turn it on, walk away, come back in 5 minutes, and I have my butter. Mine is a Kitchenaid, and it’s always on the counter.
MODEL # ?
@@stevethea5250 NO! ;)
This is my second Magic bullet, and I have to admit that for the price it delivers really well th-cam.com/users/postUgkxCKuMxLnvr6fJd_M4SE-n7trcGj3zEUHq Considering that there are other products twice and even four times more expensive, I think that for one person this is just right. The only problem is that you have to make sure that your vegetables and ice are cut into small pieces because it won't chop and blend well. I made the mistake of putting whole baby carrots with a cup of mixed greens, and it wasn't pretty.. Also be careful not to overfill it, because it will overflow. As long as you follow the manufacturer's instructions for use, you should be happy with this purchase.
Why didn't you try the blend setting? It changes speed to help with the blending process. All you did was spin the almond crumbs.
Or even using the pulse button
That is what the pulse button is for
It does not change the speed.
The problems with the bigger blenders though... you have to make a lot for the blades to make good contact, then digging the contents out without wasting half of what you made. I don't know which is more frustrating.
U can add water to the blender after making, it turns into nut milk.. Just a cup of water to a spoon of left over nut butter🙂
Add a small bit of coconut oil to help things along
Nutribullet isn’t meant to be on for that long; I’m glad you didn’t burn out the motor.
There is a grinding blade attachment for the nutri blender. Both came with mine. You are using the wrong blade and not pulsing.
Finally an intelligent reply bases on the facts ... Bravo!
This guy made my day with his struggling odyssey and chef hat🤣🤣🤣
lol
🤣
the way you put it, they could totally use that as the title of this video, lol man
Funny... 😃
Mislead your mind.
This was the perfect review video! Exactly what I needed. Everything else on TH-cam on the subject isn't good enough to allow you to make a definitive decision. Thank you for taking the time to make this!
Me too just subscribed, really helpful
Right on sister 🙏🙏this was great 😊 to understand ❤️❤️❤️
For nutribullet 900 watt, it is mandatory to use liquidsnor motor will burning, it is in the notice.
Stopped at 2:25 to comment. That Nutribullet spinning wildly and then catching is extremely hard on the motor and bearings and the blades! Then the fact that it really didn't do a very good job and needed constant adjustment!
After also watching the Ninja, I am not impressed at all with either of these.
I'm glad I watched this video. At least I now know what not to buy.
Thanks
You need to use the Milling Blade - it's designed for this task. The standard blender blade will throw contents around i.e. onto the container walls.
Yes! These definitely have their place but my Vitamix will liquefy nuts into butter in just a couple of minutes. It has a tool to push everything down when it goes to the sides.
I roast pecans, add dates or date sugar and a pinch of Himalayan salt. Delicious!
Roasted cashews with organic unsweetened coconut, salt also delicious 😋
Going to try walnuts with maple and cinnamon.
Po0
Yes, if you pay 6 times the money you should expect that.
@@worldhello1234 yup, and it's worth every penny
Can y’all just tell me which one came out better.
😂😂😂😂 the Nutribullet, but only because he didn’t use either one of them properly. Get the Ninja lol
@@animezae 🤣🤣🤣🤣
I dont think this was a good idea, Ninja says you shouldnt use it to blend dry stuff
Nutribullet as well
If You used a ninja nutri duo blender you would have gotten better results because it has a “tamper.” It helps it get off of the sides.
Almond butter is one of the hardest butters to make , even with a blender that has 2.2hp the consistency of almond butter is much more dense and thick than lets say than peanut butter. the type of blenders this guy is using is very limited to what it can do
What blender would you buy to make it work without problems?
The larger diameter canister can’t keep the powdery nut material within the path of the Ninja’s blade. Neither machine does that well as they are being used here. I would try adding slightly warm water (95 F) for processing; when completed, dump into an open wide mouth container (jar) and let the excess water evaporate out...stirring it several times daily until I achieved the ‘butter’ consistency I wanted. Be sure it doesn’t get rancid or contaminated, infested!
I haven't checked my Nutribullet manual while watching this, but I wonder if the milling blade would work better or not...
Why would you do a review and stop because you get frustrated... 🙄🙄
Its frustrating watching a review and not being able to get ANSWERS!!
It's less strain on the motor if you turn it off at the wall instead of twisting it off while still running. Will prolong the life of your motor
What??
You should always add some liquid when using nutribullet. It s not made for mixing nuts.
lol @Falcon You make perfect sense to me
Do you know how watt it is? I think a blender must have enough watt to make nut butter
Why are not using the blend IQ function in ninja. Very very partial in reviewing 2 similar blenders with different functions.
So, which is the most cost effective durable blender that grinds dry stuff too? Chopping/dough making would be an icing!
Hi Joe, I dont own a NutriBullet, Ninja nor food processor (I just have other kitchen gadgets & appliances) like a regular blender...but anyway, as I mentioned in another one of your posts I kinda do wanna buy a Magic Bullet / NutriBullet but I would really like to know if it can crush those bigger size ICE CUBES but also... Id love to know how to make NUT MILKS rather than P.B. cuz I use more nut milks than PB (which I have the dry kind, mixes with water and it's A LOT less fat) than typical PB. Thank you! :)
Have you tried the Nutribullet milling blade instead???
Silly, nut butters are made in the food processor, not the blender. Blenders are for purées, not grinding.
Aha, and it's becoming more silly with the chef hat.
Good info
He was kind enough to take the time to give us the information
What's the problem with wearing 🤔 the hat,? I thought it was nice
I have a ninja that has the nut butter setting and pretty much I press the button and walk away come back and there's nut butter where my nuts just were. I think if you want to make nut butters you should go with a different ninja. That one is maybe meant for more liquid based items.
Ohh that sounds interesting! You got a link for this special ninja? :)
how many Watt is your blender?
Ninja professional chef blender shows a nut butter setting is that what your using ?
Which ninja model is this?
Exactly
Cuál recomiendas? Para realizar mantequilla de almendra. Gracias
The ninja makes a vacuum seal. I added a little olive oil to mine...let it drain into a cup...clean up was amazingly easy.
add 1/4 of a cup to make is creamy will reduce the friction on the motor?
All you need to do is soak the nuts first. Can't skip this step for either machine. Soaking first would've yielded better results.
I think you have to soak and ferment the nuts slightly first 👌👨🍳
So if you don't want to use oil, what if you thinned it out a bit with a splash of almond milk?
Well I suppose it's a good thing I didn't try to blend the nuts with the Nutribullet! The almond powder they made in the beginning might be useful for toppings though.
Yeah - the powder was super easy. I was able to make the nut butter, but I can't imagine that it's good for the blender and/or safe since the heat is building up.
@@BlenderKitchen what if you really take your time? Like let it cool and do it for like hour or two with breaks? Would that be bad for the blender?
@@monobgantonina5577 I think this would be the best option for the blemder to be safe but that would be wasteful for your time...
All you to do is pulse the machine which reduces the heat and the butter will come. The Nutribullet 600 watt has a flat blade that is specifically designed for grinding. You can also buy this blade separately for the Pro 900 watt.
Simply stated, regardless of the size of the blender you can not make a small amount. The fuller the blender, the better the results. I'm pretty sure that if he had doubled the amount, both blenders would have done a much better job.
Hi any recommendation for multipurpose grinder blender food processor
Can i ask about which blender does not overheat?
Could you have soaked the nuts and drained them before hand?
Put a little oil of your choice, and it will blend smoothly. Read the jars, and they all have oil added.
No they don’t all have added oil
I think a little bit of water added, instead of oil, would make for a smoother result, without changing the consistency or taste very much, & not add any high calories, that are in oil.
@@shaelstrata517 or for that matter a little almond milk.
Did you just use the normal blade? Extractor blade I think it's called (Nutribullet)
I have seen pistachio paste for ice cream being made, and he used a mini chopper/mini foodprocessor. There were no stirring, shaking, no nothing, it just made pistachio paste. It took a while, but the machine did it. So I guess a blender is not suitable for the task, it must be a mini chopper.
Pistachios are also a softer than almonds so that could be part of it. Some nuts are way easier to turn into nut butter :) But yeah - the big blades on the food processors are also an advantage if you don't have a tamper or Twister Jar on the Blendtec.
What the hell you doing , you keep doing the same thing over and over and expecting different results, Slow it down and pulse it man , Nut butter isn't made by blitzing the hell out of nuts , They crush and blend the nuts , just do it slowly and you will have fantastic results , good luck☘️
Yes I can make peanut butter in my ninja ..very easy
@@sarasan9290 The Ninja is far superior. One thing anyone must do before processing nuts in any blender is to coarsely chop them up. Common sense..😉
Y'all hush! The man is an expert. Don't y'all see that big white hat? 🙄
@@wakkywabbit5446 🤣🤣🤣
Mmmmm *Gives Hug*
Every time you shake it sends the contents under the blades..... SMH
The Nutra Bullet makes nuts butter good. You have to move the cup and it takes 3 times.
Milling blade u must use in the nutribullet.
Thank you for testing for us!🌻
Nutribullet is not designed to grind dry ingredients. It's meant to have liquid in it.
Hi sorry to bother you,what type of grinder do you think or know would be great for grinding dry stuff.Im grinding at a mill and it's expensive,want to get one I can grind at home with. Thanks
Lol it's centrifugal force, man.
The blades on the ninja go too fast at a sustained speed for the nuts to come into contact with them... should have used the pulse button to keep the blade speed under control.
Which one is the best one for you? Without care of price
“Not that much more”. Literally 4x the cost.
arent you using the wrong blade on the nutribullet? It comes with a blade specifically made for this type of thing!
yes he is
Great video. Thanks! Maybe you could compare the ease of cleaning each of the blenders/blender blades. I’ve heard some pretty bad things about cleaning the blades. It would be nice to hear from someone who uses them in a more professional capacity.
I make almond butter and other butters in my Thermomix they come out very smooth in just a couple seconds
Neither of these are designed for nut butters. Perhaps you could have compared blending guacamole ingredients or bruschetta ingredients or something like that, and they both would have been equal.
What blender would you buy to make it work without problems?
I have used both of these blenders. I don't know if it makes a difference, but at 5:16 and again at 6:13 you did not lock the ninja into place by turning it to the right, so it was just sitting on the base. Perhaps that is why the nuts would not hit the blade.
Which blender do you think is better? I’ve been looking for one to make smoothies but been a struggle
You should use flat blade for making nut butter
I do mine in a food processor but honestly I think it still gives trouble I have to end up adding some kind of nut oil otherwise I'd be waiting all day.. Also the nuts become warm and steam comes out which idk if those machines can take so I have to keep stopping and allowing to cool down. Maybe my processor is lame 🤷♀️
buy a spatula.
can nutribullet make sesame seeds into powder?
Which one do you prefer in terms of quite blenders.
I have the Ninja one and it’s really REALLY loud. Wondering if they’re just like that or just mine and has an issue 🤔 please, someone? :(
The larger the motors, the louder they are. Many are this loud and it's normal.
I got one. Its too loud will be returning it. Thinking of getting the vitamix
Great video just to see what the machines would do
Hi, do you have its spice grinder attachment? If you do ..does it work with bl480D
Can you CHEAP the NutriBullet and Ninja blender?
How's single serve on Windows 7 Vienna? Cheep!
A refurbished Vitamix is 7x more expensive than a brand new 900w Nutribullet. 😂
Hi can you do raw carrots / or broccoli soup with a Nutribullet please?
Probably, as she did put some raw carrots in, in her demonstration. However, they need to be diced up first, & blended with water or broth, to not strain the machine.
can u also blend oats to oat flour with the nutribullet?
Yes you cannot literally just did that as a test before I read your comment but it came out amazing
The Nutribulate Is a beast in my opinion
What if you boil the almonds instead of roasting them? Would it taste good?
I’m pretty sure you need to add just a little bit of liquid.
Actually, I would have preferred an Unfair advantage where you used the Ninja Auto-IQ cycle to gain the edge in your demo Excercise. Or maybe it would still fail? But that's the real challenge. Which one would make the Almond Butter in the shortest time? So that would really be the true Winner. Thank you.
That chefs hat made up for the review.
Ahaha right
At the first sentence I find out my mistake! I haven't roast them! 😂😂😂
I wonder if soaking the almonds overnight would also work.
@@dimwitsadvocate6264 have you tried roasting them after soaking? If they are hard then should work I sense..
@@giulias.5104 I never roasted almonds, although I buy them roasted at the store. I don't know if it's the same thing. I'll have to watch youtube videos on roasting them as I've never roasted anything. Thank you for your idea!
@@dimwitsadvocate6264You're welcome! I don't know if it would works though. ...Usually people who sprout the almonds, then dehidratate them, which is better for your health than roasting, but you need to invest in a dehidrator.
Roasting unsoaked nuts in general it's super simple, they roast quickly, few minutes on a medium temperature oven.
Let me know if it worked, if you do the almond-butter and remember about this post. (I can't help because I am away from my nutribullet at the moment.. 😥). Happy butter 😘
so what blender can actually do the job?
Good show ! by the way almond or any nut should be backed before blending, to be honest it takes less human & machine efforts
The Ninja beats the Nutribullet hands down. Ninja is far better than the bullet in my humble opinion.
Carol Binnie I had a ninja, and it broke it started smoking and I had only had t for 1 year and didn’t use it that often.... and I was only blending strawberries that weren’t frozen or anything and now I have a nutri bullet and it is way better
Olivia Anders after all the horror stories regarding the Nutri Bullet , I'd never have that. I personally love my Ninja , & I love the fact mine's also makes pastry for cookies pies etc also.There's a LOT more Ninja can do that the bullet simply cannot do.
Carol Binnie I actually had my facts wrong I have the magic bullet and it’s amazing
I actually just made nut butter with my magic bullet
I have to admit, I love my wee magic bullet for making milkshakes. Because it's only 200/250 watts , it's a brilliant wee machine for those.
The almonds get stuck to the side in my food processor as well, I just push it down and eventually it becomes butter. You just need more patience man
Which food processor are you using?
I say for nut Butters (raw or roasted)hang both of these up! Too much work when it shouldn't be that much work. For a nut butter I throw my nuts & salt into my 14 cup KitchenAid food processor. Then Walk away :-)
When you come back you have a nut butter :-)
Totally agree. I use a 10 cup one and just as effective.
I make nut butter with my ninja nutri blender pro all the time. Try using pluse next time.
Pero le hecho demasiadas almendras.pero es bueno.el ninja tiene un motor más fuerte.claro.
bonjour chef! Thanks for the comparison :)
Thx. I want to make my own nut butters and I'm now seeing that my Nutribullet is probably not going to be as effective as my food processor
Really don't see any advantages of making nut butters this way vs buying them off the shelf :(
Wrong nutribullet blade
My 600W Bullet of 5 years finally broke recently. Good timing for mother's day :). Hence I am now looking at both Bullet 900W and Ninja 1000W Auto IQ BL480. The Bullet 900W with 10 pieces packaging is only $99 and the Ninja 1000W Auto IQ BL480 is $139. Bullet is meant for making smoothies, convenient and small. If you want your Bullet to last longer you've got to follow instructions closely, it needs LTC :). However, the reason I am looking at Ninja is because it has more features, the auto and pulse and their cups are made of polycarbonate material. In addition Ninja is able to crash ice into snow. Ninja is heavier and a bit more bulky than Bullet. Ninja BL480 $139 is clearing this model as they have launched a newer generation and Bullet 900W for $99 is value for money. I already have a bulky Braun blender so which one should I get?
Ninja, with the auto IQ model you can use the pulse setting to make nut butter, you don't consistently blend like in this video hahaha, it can blend nuts and seeds, crush ice and frozen fruit and gives you a recipe book it also counts down so you know when it is done, I have one and it's amazing
@laurenslater3914 is it still working?
Hello guys! I want to buy one. Do you think ninja is the best. Want a sharp blade. Please suggest.
Ummm had you put some coconut oil or honey at the beginning...maybe they wouldn't be clumping and sticking to the sides. Telling me NOT to buy one of these personal blenders. And just spend a few hundred dollars more and buy a Vitamix.
And actually a "cert refurb" unit IS sort of expensive. Maybe within a $100 from a new unit...at least on Amazon...
or simply soaked the nuts for about 30 mins in hot water...that's a pro tip even for real food processors..
I'm here looking at this video & comments because I just got a 1000 W Ninja With all 3 containers , in 3 different sizes, base unit, , blades & 2 drink tops for only $4.99! I wasn't even looking for one, but the worker literally set each piece on an empty shelf right in front of me! 2 seconds after he left, I scooped the whole set up. So I'm here, learning how to use it. So, try looking in thrift stores. It's not all junk there. Sometimes people move & get rid of their stuff, get a newer model, or don't like the presents people give them. Why pay more than you have to? Then, if it dies, you only lost a tiny bit of money.
The nutribullit IS NOT DESIGNED to work dry!
there is 1 blade for dry in nutribullet he doesnt use it
@@josefinapaje8220 Ok. I don’t have it. Thanks!
@@josefinapaje8220 You can use the mill blade to make flours, grind coffee beans, etc. It is still my understanding that it isn't supposed to be used for butters. Nutribullet doesn't provide a mill blade with the 900 and they state it's not needed with 900 due to the motor size. Another youtuber called them and did a video on making oat flour with the 900's provided extractor blade.
@@angelessantamariablanco It didn't get provided with the 900.
@@yvonnepalmquist8676 ok. Thanks.
you did not add oil
Shake the blender while its working!!
You should pulsecit not letcit go constant,that's how you blowthe little engine
If you'd roasted them, & also added coconut oil or something, they'd have been far better.You should have at least added oil to them.
Carol Binnie Hi Carol - they are roasted but I purposely wanted to test without oil :) I’ll test the some coconut oil in a future video.
He did not use the correct blades for nuts on the nutribullet it comes with special blades for nuts
Blade is not a good quality one ..it will become damage if we used to grind almonds for long time
Did he seriously say a refurbished Vitamix isn't that much more expensive than one of those blenders?? A nutribullet pro is about $90 and a refurbished Vitamix is $329! I'll just add some oil to the nuts and have some patience instead 🙄🙄