Arduino obstacle avoiding Robot car | Arduino ultrasonic sensor and L298N based self driving car
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2019
- #Arduino #SmartCar #electronicGuru
Buy Arduino obstacle avoidance car kit:
www.banggood.in/Geekcreit-DIY...
Download Code :
github.com/shveytank/Arduino-... - วิทยาศาสตร์และเทคโนโลยี
The way you say chassis is hypnotic... I eagerly wait to hear you say it again... and again... and again...
Chazzis LOL
Chazzis LOL
good video bro keep it up come up with more stuff like this
Thanks, bro. You help me a lot. Sucess
Your welcome 😃
Which wire did you use for the ultrasonic connection to arduino
Very nice project. I like it
Thank you so much teach very clear
Nice product sir,
Worth to buy
Thank you very much sir.Sir,Can i Power Supply arduino and motor Shild at Same Time?
How to Supply power ?
See there give power to motor shield and shield has 5v power output which can used to power Arduino.
7:10 KEEP EXPLODING 💥
Can I use Arduino UNO R3 SMD Atmega328P Board - Clone Compatible Model
Sir, the wheels are moving but the ultrasonic sensor is not sensing .I followed the exact same steps .I even tried replacing the ultrasonic sensor with a new one but its still not working .Kindly help me sir.
We did everything as in the video! Uploaded the sketch! But only goes forward, ignores sonar and servo! What could be the reason?
Probably your connection
Mine's also like this. Were you able to fix it? If you were able, how?
Add few serial.println statements for ultrasonic data in code to see if it getting data
I tried using your code. However getting an error on "readPing" not defined. What could be wrong?
Check the libraries you used.
Is that really without instructions? That would not be salable in Germany. But the Chinese can do that because they have you to create a guide. I hope you have another component besides the components.
@@electronicGURU sorry, compensation not components
can you please give me wire diagram please i need it for my school project and i have same kit as you but i cant put the battery holder at the bottom because it dosent fit and the l298n dosent fit can u give an alternative way to put the components WHEN the bettery holder is on top!
i dont have circuit diagram as of now but you can place components as you wish, use double sided tape to place it anywhere.
sir can you please upload the circuit diagram? Please? because i needed on my project?
It works bro Thank you .
Your welcome ☺️
Great video, i copied your code and the code is good but when i upload it to the Arduino UNO board only one motor turns and the sensor doesn’t work, does anyone else have the same problem, if so how did you go around fixing it thank you.
Well try to switch the motor driver jumpers to see if motor works in either of those ways. And what exactly issue you are facing with sensor.
@@electronicGURU thank you for the quick reply, I tried switching the cables and still nothing and basically what happens after I switch on the car is that only the sensor motor turns then stops then the left wheel turns and just keeps turning.
Actually sometimes it behaves strange. I am also not sure why because the code is correct. But you know use some println functions to see if sensor is reading anything.
@@kesimukasa3621
Actually, I am also facing the same problem. The wheels are moving and hence the car is moving in the forward direction but the ultrasonic sensor is not able sense any obstacles.Did your problem resolve?If yes could please help me out in this regard ?It would be a great help.
my ultrasonic sensor is not working what should i do??????
can i make this project without the sensor sheet?
Hi! congratulations but I have a question, could you tell me how is posible agree a bluetooth in this car, please? tks
I whant too
Please can you keep the circuit diagram for this by the other week end plz bro I have To do science project I liked it plz
Genial 🤗
Bro can you help me. I followed everything but mine's only go forward and hit the wall. The servo and the sonic sensor does not seem to work. Pls help
Yeah it happens first check the connection and make sure your ultrasonic is working add serial command in code to see in serial monitor if ultrasonic is working or not
@JayeLarz
I am also facing the same problem.Did your problem get resolved.If yes could you please tell me how it got fixed.?
@@tanayasingh2402 if i remember it correctly the cable connected to the sensor is flipped. When i tried flipping it, it worked. Not sure though i might have done changes on the code. I dont remember it anymore since this was years ago
@@JayeLarz
Okay , Thankyou
I'm doing it by looking at your video, but the sensor connections at the end of the video and the connections at the end of the video are different. I made the same connections as you but the sensor and servo are not working
same problem
Ótimo meu nobre
Nice
Thanks Aryan.
hi, please i have uploaded the code only the car move forward. ultrasonic and servo no working. What should i do please...
@benjaminkwamedonkor4944
Actually even I am facing the same problem. Did your problem resolve? If yes, could you please tell what changes did you do ? It would really be a great help.
chaziz
What about chassis?
I check every wiring it worked exept the sencors what do i do
A. Wiring
B. Broken sencor
Other (reply)
Did your problem resolve? If yes, could you please help me out cause even I am facing the same problem.
Can't download the file! Where else can you download it?
Which one?
Clearly explain, i give 5 star
And your set is same with me lol
Can someone give me code fir this please
What is that sensor shield?
Well its like giving proper headers tp connect everything thats it.
Bro plz can u share digram of wire connections
I don't have brother as of now.
My arduino doesnt take turns can u help pls?
Make sure your servo and ultrasonic is working.
Sir my servo is not working, can you help?
Please explain your issue in detail! What happened with servo?
@@electronicGURU my servo is not moving at all..the car is only moving forward and hitting the wall ...the ultrasonic sensor seems not working also.
Hi sir I can help you
Make sure your servo is in proper working situation
Why did you change the wires but didn’t show it in video can u pls say how I need to connect the wires
I did what you say but the car runs eratically.Servo and sonic sensor don’t work properly .Can you show and draw the connection clearly please..
Awesome bhai
Nothing is working and my sensor gets heated up
Something is wrong with your wiring
May be you would have made some mistakes.
Yeah i too think so...
me vende um já programado pronto para uso
Do you have the circuit diagram?
Sorry I don't
Bro my black piece i to small cant fit I am stuck :(
Reply for why I should do plsssssss
The black piece on time 3.38 is to small but the other one works how to make more bigger pls help me
How small? Are you not able to put a servo in it?
If nothing works cut it to make big and use super glue to attach the servo.
Great 👍
Code is wrong
Circuit diagram
can you pass me the code?
Its in description
Chazzis
them nails tho
Sorry?
Hey dont say that you are rude you cant make fun of people
Btw I am sorry about your nails hope get better 😇
It does not working
Please let me know what problem you are facing.
electronic GURU all the lights are on. I uploaded the code, and no motor or ultrasonic sensor worked
electronic GURU I followed exactly what you did on the video, do you mind to discuss about it through email ? my email: baon.2k17@gmail.com
Well mailing won't be effective why not ping me on insta
Thats odd.. did you checked the connections?
He says error
In the code please help
The guy said from up stairs said check the libaries your using (its from electronic GURu not from me try maybe)
can you speak indonesian ?
I made all like in the video, same connections same arduino library and code, but my car its rotating in circle, someone have the same problem???
me too
did you get aby solution
U have 1 motor witch moves in inverse direction, try to make both of them in same direction ( look where u define PINs motor ). For me that was the solution