I think I have Glow plug issues with my 2013 MN Triton, just replaced the injectors had an intake clean, valve adjustment and catch can fitted. But still have the problem only when its super cold first thing starting is a little rough idling and blows a little bit of white smoke then cleans up and all good. once warmed up a little all is good.
hi i have a 3.2 triton i have 2 codes U1102 ASCTIMEOUT/ NOT EQUIPED AND U1101 T/M CAN TIMEOUT/ NOT EQUIPED blows alot of smoke and also on scan tool acc fly by wire jumps from 1.2v to 4.9v just from 1mm movement. it says u1102 is acc pedal position sensor have you come acros this problem before?
I am getting black smoke and poor economy. Barely 550klm per tank and I am not a lead foot. I was thinking possibly EGR as it has done 160,000 Km. I am fairly certain now it is air related as you have alluded to.
I had been getting poor economy on my 2013 and excessive regen of the dpf system. Turned out to be an intake hose split to the throttle body. Over fueling and the smoke caused the dpf to regen after 50/80 miles.
Mr. Technician, thank you for advises. I have almost the same problem with Triton 2018 2.5 diesel , 50.000 miles, it displays DPF problem with check engine light on. I drive mostly highways over 60mph so it was strange that DPF is blocked. After forced regeneration DPF check light is still on , it goes off after few miles of driving but appears always when I start the engine. Lack of power on hills, no black smoke. I will check vacuum but what can that be if vacuum is OK? Help...
You need to run a decarboniser additive in your fuel. The company Cost effective maintenance sell the best one I’ve found. Run that in your fuel and you’ll never have an issue. Look up FTC Decarboniser
I’m having a little black smoke whenever I accelerate , power is fine however however I would like to know what areas I need to consider when trying to resolve this.
Bloody legend. Excellent quick explanation of everything important.
Thanks again for an informative video, cheers
very nice tutorial you shared sir,any tips about diesel engine more and more and more .thank you.
I noticed no catch can on this. It's coping well unless the intake has been cleaned.
I think I have Glow plug issues with my 2013 MN Triton, just replaced the injectors had an intake clean, valve adjustment and catch can fitted. But still have the problem only when its super cold first thing starting is a little rough idling and blows a little bit of white smoke then cleans up and all good. once warmed up a little all is good.
Try clean your maf sensor man I found that fixed mine up!
What'd you pay for that?
I had loss of power and it was the MAF sensor on the air filter box.
Same, the difference was massive.
Great movie mate 👍
hi i have a 3.2 triton i have 2 codes U1102 ASCTIMEOUT/ NOT EQUIPED AND U1101 T/M CAN TIMEOUT/ NOT EQUIPED blows alot of smoke and also on scan tool acc fly by wire jumps from 1.2v to 4.9v just from 1mm movement. it says u1102 is acc pedal position sensor have you come acros this problem before?
I'm sure it is pronounced Triton, not Tritont
I am getting black smoke and poor economy. Barely 550klm per tank and I am not a lead foot. I was thinking possibly EGR as it has done 160,000 Km. I am fairly certain now it is air related as you have alluded to.
Dint soend 1200 dolars on ERG i did on my treton and srill problem is there dont spend mony for no risend
I had been getting poor economy on my 2013 and excessive regen of the dpf system. Turned out to be an intake hose split to the throttle body. Over fueling and the smoke caused the dpf to regen after 50/80 miles.
I have a fault code showing u1101 timeout not equipped can you help plzz
How’s that 4D56 engine going?
Mr. Technician, thank you for advises. I have almost the same problem with Triton 2018 2.5 diesel , 50.000 miles, it displays DPF problem with check engine light on. I drive mostly highways over 60mph so it was strange that DPF is blocked. After forced regeneration DPF check light is still on , it goes off after few miles of driving but appears always when I start the engine. Lack of power on hills, no black smoke. I will check vacuum but what can that be if vacuum is OK? Help...
You need to run a decarboniser additive in your fuel. The company Cost effective maintenance sell the best one I’ve found. Run that in your fuel and you’ll never have an issue. Look up FTC Decarboniser
I’m having a little black smoke whenever I accelerate , power is fine however however I would like to know what areas I need to consider when trying to resolve this.
Check egr valves and intake manifold
They all do that, sir 😉
Any good mechanics in darwin to take my car too
Did he say " Mitsubishi Tritant " ?? WTF
you speak so fast ...))))
My engine light come on the idling don't go up i think it goes into limpmode what can do that
Maf sensor. Try to clean or replace. I got a cheap Chinese one off ebay.