Hi. I have the same model you have. But only i have multiple sensors programmed. Question is, is there any way we can rename the programmed sensors to be able to quickly find what sensor and where it was located? For example, default is door alarm (zone 1), can i rename it to "main house door" just for example? Hope you would help me on this. Thanks!
Hello! Unfortunately you cannot rename the zones! This is a big defect .. I only have 4 sensors and I remember what they are but if one has 20, how does it! ??. We hope for a future update.
@@cosmochannelvideo too bad. I agree that this should come with an update. Having lots of sensors and knowing where to find the sensor while siren is going will definitely give a rattle to the user. Might provide a table of sensors with their corresponding locations for the meantime. Thanks!
Hi. in the video I hadn't activated the pin to disable the sound for convenience. Activating the pin to silence the siren and to deactivate the alarm you must insert it.
Olá, boa tarde! Tem algum sensor IVA (perímetro) especifico para essa central, pois tentei instalar o da intelbras e não deu certo com o sensor TX 4020. Consegue me ajudar?
Has anyone ever replaced the battery at the Smart Hub (control unit)? My battery lasts a short time in the event of a power failure. Is it possible and easy to change the battery? Thanks for an answer.
Awesome video! Thank you so much. Just one quick question, how long the batteries from each sensor last? I imagine that it will depend how many times it have been triggered but maybe an estimate? Thanks again!
Hello. thank you for your compliments! I can tell you that for me with average use the door sensor is still charged while the infrared sensor gives me a low battery after less than 2 years ..
Hello. Why you have allways the ZONE 1, Door Open? Ive the same model of you but i have the same problem! And if you arm the system this sensor (zone 1) dont horn! Can you help me? Tks
Hi, there. As soon as I configured everything for the first time, a door sensor gave me problems. It was always open. I deleted all the programming, removed the batteries from all the sensors and I rebuilt the programming and now everything has been working perfectly for months. Try to reset everything. It worked for me.
What is your experience after months of using the system?Any faults? also is it easy to arm the system having the ability to exclude some areas (e.g door no 2 or window no 3)?
my experience is very positive! it has never had a false alarm! I bought several for friends and never a problem (only one had a broken battery but with 3 euros I replaced it).
hello, can you tell me how you do to synchronize the plant with the new application. Many people have problems with the new "Easy Security" application
Hi, there. Thanks for the comment. Unfortunately I installed this alarm in my garage where I do not have wifi so I never set up the app. I'm sorry but I can't help you.
Awesome video! Thank you! Actually, i cannot receive calls to me iphone when an event occurs. I turned off the pin to unlock the sim. The sim is active and there is money. I receive only alarm sms, not alert calls... In addition, i had stored the phone number. But no result.. Every advice is welcome..
How long do I hold the batteries? I had a similar system and had to change the batteries to 3 days.
This system must always be connected to the power supply via its power supply. The battery inside serves as a buffer for no more than 1 hour.
Cosmo Channel I apologize for not specifing, i refer to battery of sensor.
Hi. I have the same model you have. But only i have multiple sensors programmed. Question is, is there any way we can rename the programmed sensors to be able to quickly find what sensor and where it was located? For example, default is door alarm (zone 1), can i rename it to "main house door" just for example? Hope you would help me on this. Thanks!
Hello! Unfortunately you cannot rename the zones! This is a big defect .. I only have 4 sensors and I remember what they are but if one has 20, how does it! ??. We hope for a future update.
@@cosmochannelvideo too bad. I agree that this should come with an update. Having lots of sensors and knowing where to find the sensor while siren is going will definitely give a rattle to the user. Might provide a table of sensors with their corresponding locations for the meantime. Thanks!
Very detailed video, thanks for sharing.
Thank you so much!
Hello, i guess normally you would need to enter the code to shut off the alarm sound instead of pressing disarm?
Hi. in the video I hadn't activated the pin to disable the sound for convenience. Activating the pin to silence the siren and to deactivate the alarm you must insert it.
Can someone tell me how to link this alarm to Alexa? the box says it is supported but I cannot find a skill to link to Amazon Alexa
th-cam.com/video/LLSI-kIqmY8/w-d-xo.html
Check this
Olá, boa tarde! Tem algum sensor IVA (perímetro) especifico para essa central, pois tentei instalar o da intelbras e não deu certo com o sensor TX 4020. Consegue me ajudar?
Sabe informar se sem como controlar por app iOS ou Android?
Hello. It is possible to control with apps on both android and ios smartphones
Has anyone ever replaced the battery at the Smart Hub (control unit)? My battery lasts a short time in the event of a power failure. Is it possible and easy to change the battery? Thanks for an answer.
Bye! Never replaced but I think it is very simple. I have no idea how it is made but I can think that it is the classic 3.7v lithium battery
Awesome video! Thank you so much. Just one quick question, how long the batteries from each sensor last? I imagine that it will depend how many times it have been triggered but maybe an estimate? Thanks again!
Hello. thank you for your compliments! I can tell you that for me with average use the door sensor is still charged while the infrared sensor gives me a low battery after less than 2 years ..
Hello. Why you have allways the ZONE 1, Door Open? Ive the same model of you but i have the same problem! And if you arm the system this sensor (zone 1) dont horn! Can you help me? Tks
Hi, there. As soon as I configured everything for the first time, a door sensor gave me problems. It was always open. I deleted all the programming, removed the batteries from all the sensors and I rebuilt the programming and now everything has been working perfectly for months. Try to reset everything. It worked for me.
@@cosmochannelvideo many many tks. I Will do that. You put new batteries in sensors or only remove and reconfig all system. TKS 👍🏻
You are welcome! I only removed the batteries and put the same batteries back on. If you have not done so yet, subscribe to my channel! Thanks
@@cosmochannelvideo Done 👍🏻
If I ignore the alert how long the siren will sound? Automaticly desarm and rearm?
If you ignore the siren after a while it stops sounding and remains active. if there is another detection the alarm starts
@@cosmochannelvideo Thanks man. Exellent!
Good demonstration...
Thank you so much!
What is your experience after months of using the system?Any faults? also is it easy to arm the system having the ability to exclude some areas (e.g door no 2 or window no 3)?
my experience is very positive! it has never had a false alarm! I bought several for friends and never a problem (only one had a broken battery but with 3 euros I replaced it).
@@cosmochannelvideo thank you for the quick answer. How about it's ability to exclude some areas from the system (e.g some windows)? Is it possible?
How long do the PIR sensor batteries last in typical use? Thanks.
about 2 years but it depends on how many times they are "alerted".
Can add sensor 433MHz other band?
Hello. I have associated a sensor from another brand at 433 MHz and it worked perfectly.
When alarm, application will notification on mobile?
yes
hello, can you tell me how you do to synchronize the plant with the new application. Many people have problems with the new "Easy Security" application
Hi, there. Thanks for the comment. Unfortunately I installed this alarm in my garage where I do not have wifi so I never set up the app. I'm sorry but I can't help you.
Awesome video! Thank you! Actually, i cannot receive calls to me iphone when an event occurs. I turned off the pin to unlock the sim. The sim is active and there is money. I receive only alarm sms, not alert calls... In addition, i had stored the phone number. But no result..
Every advice is welcome..
Have you entered the international prefix? Is your sim enabled for calls?
Cosmo Channel Yes i entered the prefix. My sim sends sms but makes no calls. So sim is enabled. I called my sim provider.
Thank you
thank you! if you want to subscribe to my channel!
Hello how long did it take to come and how much was it
Hello. It took about 1 month to get to Italy. I paid $ 90 but now it costs $ 75
Cosmo Channel do you think it will take a month to get to the US as well
Hi I can to activate or deactivate from my phone application
Yes. once configured the application you can activate and deactivate via smartphone
And I can to start siren
From app
@@dincaiulian8808sicuro
Cómo puedo configurarle un teclado auxiliar??
No creo que haya un teclado auxiliar.
nice product~
Hello my friend. How can I configure the presence sensor to be internal? Would it be option "Closed"?
If a em not home for exemple
Sure. Through the internet you can activate it, deactivate it and know the status from anywhere in the world
Music would bust you.
Just turn the volume down 😂😉😁
No se puede acoplar una sirena exterior 🤦🏻♂️
Hi, there. You can safely use the wireless siren Digoo DG-ROSA. www.banggood.com/custlink/G33KpgI1tT
This video was a complete waste of time. He didn’t explain not one single thing🤦🏽♀️
Check this if you interested th-cam.com/video/LLSI-kIqmY8/w-d-xo.html
Ķids toy