It's amazing how far people will go for content nowadays, it's hard to find something original without the word fake. Though, i appreciate all the hard work you did in this video.
Оооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооогоооооооооооооооооооогггоооооооооооооооооооооооггггг7ггоооооггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггг7оооооооооооооооооооооооооооооооооооооо́о́ он он она любишь бог блог юг блог Боб знаю почему но ъ не знаю да то эх зэк хз хз что не знаю почему но не могу я знаю щдллллллллллльллллллллллллллшлллшлллллдллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллддлллллдллллллдддддджжджжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжээээээээээээээээээээээээээээ́эх
After watching so many of your restorations, I am always amazed that you can wash all those screws and bolts in the same container and they still find their way back to their proper place. Even with video to review it is impressive. Cheers from 🇨🇦!!!
piston and cyl will be fine, as long as the chrome finish in the cylinder isnt missing chunks. Ive fixed way way worse of bad scoring in 2 strokes and with some honing and new rings, the engine lasted many hard years later
Excellent work, too bad you don't have all the needed spare parts. I think that the chainsaw engine is the same as in your previous video for the restoration of the Ryobi ESK 3500.
@@gear_show вы за шлифовали задиры на поршне наждачной бумагой, а так зачем вы его вставили его в цилиндр, вставьте это отшлифованый поршень себе в очко
grouse work mate and she,s a lovely runner afterwards and that fuel and oil ratio is pretty much the same one at 25:1 (200mls of 2 stroke aka 2 cycle oil) to 5 litres of Unleaded Fuel and here in the land down under we have that for our famous Victa 2 stroke mowers and cheers from Australia 🐨🐑🦘🌏
xem đến quả dép lào và ghế nhựa em đoán anh là ng Việt, em xem rất nhiều vieo của a và luôn có cảm giác thân thuộc như thế, video rất tuyệt vời, chúc anh ngày càng thành công!
Excellent video. In my experience the crankshaft oil seals should always be replaced when you have the engine apart. That makes a big difference to the running of the motor.
10:50 ну да, шлифовка поршня это прям то, что даст ему лучше работать. На поршне задиры. Держу пари и на цилиндре задиры. Цилиндр нужно расточить, поршень поменять на новый.
Nice to see a properly done saw rebuild. Nearly as I learned at trade school 40 yrs ago. Regardless if the saw had been used much (which it showed little signs of) and/or had been sitting for yrs (ie the spider web) the second thing I had done (after replacing the carb membrane and the plug) would have been to replace the gas pick up filter/weight + the gas line inside the tank. It notoriously clogs up. I'd also checked/cleaned the entire oil line to the sword/chain, and would have split the carb more and checked/changed/cleaned the valves and small internal filters. Finally, I had also taken apart, cleaned and greased the starter's spring coil. The housing always get full of debris and easily stops returning the cord.
Would someone please tell me what happened to the gas tank I didn't even see that come out or go in and what about the oil tank I think I've seen enough of these
how did you find out that the gap was too close and it wasn`t an air leak or any problem with L screw when it was running erratically because I would have never thought of that?
Kato cqlo mashinata e dobre zglobena , no ne se izchaka da zagree , che da se regulirat niskite oboroti , i izbshto ne sa regulirani visokite oboroti !!!.
To niesamowite że ludziom chce się naprawiać stare graty zamiast kupić nowy. Co prawda ten nowy sprzęt popsuje się szybciej niż stary ale przynajmniej jakaś azjatycka korporacja sobie zarobi 😂
![Rare Bow Chainsaw [Restoration]](http://i.ytimg.com/vi/Wjv75kJyZ7M/mqdefault.jpg)
It's amazing how far people will go for content nowadays, it's hard to find something original without the word fake. Though, i appreciate all the hard work you did in this video.
I'm so glad to hear that, thank you!
Оооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооооогоооооооооооооооооооогггоооооооооооооооооооооооггггг7ггоооооггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггггг7оооооооооооооооооооооооооооооооооооооо́о́ он он она любишь бог блог юг блог Боб знаю почему но ъ не знаю да то эх зэк хз хз что не знаю почему но не могу я знаю щдллллллллллльллллллллллллллшлллшлллллдллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллллддлллллдллллллдддддджжджжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжжээээээээээээээээээээээээээээ́эх
@@gear_show rvfefefcc
After watching so many of your restorations, I am always amazed that you can wash all those screws and bolts in the same container and they still find their way back to their proper place. Even with video to review it is impressive. Cheers from 🇨🇦!!!
The way it turns itself on the table at the end. 🤣
It's like "Look at meee, I am running again!" 😁
ja ja lo mismo pense
Super work wow wonderful
You are awesome Thanks for sharing sir.
You're welcome, I'm glad you like this video, thank you!
And the Mr. Gearshow is BACK! Thank you for the video!
You're welcome, Thank you for waiting :)
Beautiful restoration mister well done
I'm glad to hear that, thank you!
Nice video i like the way u restore now a days if something gets old people unlike u only restore them others just trash them
I'm glad you like this video.Thank you!
Great job, thank you brother. You are so talented
You're welcome, thank you!
i love the happy complete successfully chainsaw spinning at the almost end :D
Fantastic Brilliant job, well done
Lovely comment, thank you sir!
Excelent work ☺
Thank you!
Unbelievable work
Another perfect video..👏
I am missing your video so much, where are you from ? I am hopping to can watch your new videos every day 😁🙏
Have a good day Mr. Gear Show
I'm so happy that you love my videos, I will try to upload video much as possible. Thank you!
@@gear_show thank you so much Lord Gear Show, I'll waiting your new video 🔥🔥🔥
Good job 👍👍👍Thank you for sharing. Be safe 🇨🇦
You're welcome, I'm glad you like it.
piston and cyl will be fine, as long as the chrome finish in the cylinder isnt missing chunks. Ive fixed way way worse of bad scoring in 2 strokes and with some honing and new rings, the engine lasted many hard years later
Thank you for sharing!
TRT tek
Excellent work, too bad you don't have all the needed spare parts. I think that the chainsaw engine is the same as in your previous video for the restoration of the Ryobi ESK 3500.
Yes, the same engine. The piston diameter is 38 mm while in the market available 34,36,39,40 etc...
You are the best
Como sempre ficou muito bom GearShow! Gratidão
Fico feliz que tenha gostado, muito obrigada!
@@gear_show what is the name of that little drill
Really nice work and interesting video 😎
I'm glad you like this video.
Perfect Video, Thanks!
You're welcome, thanks!
Nice restoration, wish I was closer to you, I have one about the same condition.
@@E-hab I might try but I lack a lot of the tools.
I'm glad to hear that, thank you!
Nice job!
Лучший спасибо за потраченное время!!!
Не за что, я рада, что тебе понравилось.
@@gear_show вы за шлифовали задиры на поршне наждачной бумагой, а так зачем вы его вставили его в цилиндр, вставьте это отшлифованый поршень себе в очко
grouse work mate and she,s a lovely runner afterwards and that fuel and oil ratio is pretty much the same one at 25:1 (200mls of 2 stroke aka 2 cycle oil) to 5 litres of Unleaded Fuel and here in the land down under we have that for our famous Victa 2 stroke mowers and cheers from Australia 🐨🐑🦘🌏
Thank you for sharing!
xem đến quả dép lào và ghế nhựa em đoán anh là ng Việt, em xem rất nhiều vieo của a và luôn có cảm giác thân thuộc như thế, video rất tuyệt vời, chúc anh ngày càng thành công!
Very nice work G.S..
Thanks
Excellent video. In my experience the crankshaft oil seals should always be replaced when you have the engine apart. That makes a big difference to the running of the motor.
Okays, I got it, thank you so much for sharing.
Beautiful restoration 👍
Thank you!
10:50 ну да, шлифовка поршня это прям то, что даст ему лучше работать. На поршне задиры. Держу пари и на цилиндре задиры. Цилиндр нужно расточить, поршень поменять на новый.
good👍👍😘😘
Thanks
Baggus bro 👍
Wow comgratulation
Dobra robota👍
Polska Górą pozdrawiam z Mazowsza
Thank you!
Business card is perfect for mag gap
Yes, you're right, thank you for sharing!
Impressed.
Thank you!
You are very brave! I'm sure, You didn't see flying clutch straight in head.
Wish I could find a chainsaw that need a little love to get it back running
Nice to see a properly done saw rebuild. Nearly as I learned at trade school 40 yrs ago. Regardless if the saw had been used much (which it showed little signs of) and/or had been sitting for yrs (ie the spider web) the second thing I had done (after replacing the carb membrane and the plug) would have been to replace the gas pick up filter/weight + the gas line inside the tank. It notoriously clogs up. I'd also checked/cleaned the entire oil line to the sword/chain, and would have split the carb more and checked/changed/cleaned the valves and small internal filters. Finally, I had also taken apart, cleaned and greased the starter's spring coil. The housing always get full of debris and easily stops returning the cord.
Thank you for sharing!
What do you think caused the piston damage? Could it be because someone used straight gasoline instead of mixed fuel?
Yes, It may be like that.
That red thick he put on the end of the bolts when assembling the engine, was it grease or glue for bolts?
@@E-hab Thanks!
Reminds me of pochita 👍
you have far more patience for that than I do. I’d have simply gotten a new one. I’m sure it will work again.
It took me over a month to restore it. Finally it works. Thank you!
Chainsawman pochita reference? 😝
:) is it help?
Damn near the same as the Ryobi saw u did.
Super I'm from India
Best video
@@rockykartik787 who?
Thank you!
Nice job, master!honestly, I thought you are Japanese. How old is this one? I own a modern one. From Ukraine with respect.
It’s perfect
Thank you!
Ну да, ну да, задиры на поршне шкурочкой шлифанул и довольны в двигатель поставил. Хорош!!!
А вы как делаете в таких случаях?
great !
Один из не многих который реально реставрирует и восстанавливает.
SUPER 💯💯💯💯💯👍👍👍🤝🤝🤝
At 15:30 what is that yellow hole for? Does it let lubricant out for the chain?
The chain oil from flow from that yellow hole.
6:38 what is that powder you use for cleaning? regular detergent?
It is regular detergent powder.
Would someone please tell me what happened to the gas tank I didn't even see that come out or go in and what about the oil tank I think I've seen enough of these
that is a carb issue so it just needs a carb adjustment.
how can he do that 👍👍👍👍😘😘😘😘
Nice work brother. Can you please tell which tool ( drill) is that ? Where you bought it from ? Can you share the link ?
It is makita 7.2V impact driver.
Ремонт качественный, но роршень надо было менять!
What is that small driver you use a lot? I'd be interested to know as it looks useful
It is 7.2V makita screwdriver.
how did you find out that the gap was too close and it wasn`t an air leak or any problem with L screw when it was running erratically because I would have never thought of that?
I asked professional repair man
@@gear_show He is very skilled....thanks for reply and nice video
😊😊😊😊😊😊😊
Chain shouldn't move at idle. Idle is set too high at the end.
Yes, you're right, thank you!
Zeliwny cylinder?
Husqvarnyama 😄
How much brother?
please next is Milwaukee tools
I hope I meet milwaukee product next time.
@@gear_showand ryobi too
Всё вроде нормально, но нахрена было лезть наждачной бумагой в цилиндр? Его и кольцо жрать же теперь будет.
Muito bom
Thank you!
Süper bir iş çıkarmış
wot sort off creatares wile you do sugary on wif dis big spining nife ?
Your idle is too high. Either that or your clutch is in need of a new spring.
Trabalho lindo parabéns 👏👏👏👏👍👍🇧🇷🇧🇷
Muito obrigado!
Kato cqlo mashinata e dobre zglobena , no ne se izchaka da zagree , che da se regulirat niskite oboroti , i izbshto ne sa regulirani visokite oboroti !!!.
Can I have this machine please?
👍😎🍺🍩🛠️🗜️
👌👍👏
Как новая!
Благодарю вас!
To niesamowite że ludziom chce się naprawiać stare graty zamiast kupić nowy. Co prawda ten nowy sprzęt popsuje się szybciej niż stary ale przynajmniej jakaś azjatycka korporacja sobie zarobi 😂
Родила царица в ночь, не то сына, не то дочь...
ты очень разговорчивый
Pn 3800 u japanskoj izvedbi 😂
Корявый ремонт. Поршень весь в задирах, его необходимо не наждачной бумагой царапать, а менять на новый.
덴지쿤...왜 머리만 오셨소
Ваши видео сродни медитации.
ông ng VN hả
Sir very late video
Yes, because I spent time to find spare parts.
@@gear_show Nice sir you are very close to my heart I am also getting education in this field
Motosierra de poda nafta caro y aceite caro $$$$$$$$ carisimo gasolina pirata a falta de batería y cargador en paraguay
Sorry du chasch kei vergaser istelle men jung
Vjxhfef
First pin me
You're lucky.
Thank you🥰🥰🥳🥳
👎👎👎
Nn o tempo di giocare a pallina 🥎
Такой себе ремонт...🤦 Стоило вообще её полностью разбирать, если собирать на старом говне...!?🙊🤦
CHEERS✨!! Boost your stats = 'Promosm' .
how do you tink is da best playar at a werld cup is it fill phoden or a look shaw ?