gone pick my 2019 821 up next week by the dealer ( previus ducati bikes 1994- 916 strada and 2006 monster s2r1000 ) also gona put it on my channel, hi from belgium
hello, can I ask you some questions? Isn't the brake lever too far from the throttle grip? Doesn't it touch the ignition switch?? How did you solve it?
Hi, that is the brake, not the clutch lever. For the break, you never have to pull it to touch the grip (or you can not if you install everything correctly). In my setup, when I pull the lever with the maximum force, it's still more than 1cm between the lever and the ignition switch.
Thanks, I believe that the stock brake and clutch Master Cylinder on 1200 is the radial type already. So, the RCS or Corsa will fit. You will not need any adapter. Happy New Year!!
@@vothuat its fits the bike more (1 piece ) and yes ai was thinking also for the rcs , stock ones are ughly ( cafe racer has the ducati factory brake master cylinder looks great on the bike ) but instead ducati puts a cheap master on it , why ????
It depends on the type of the brake switch (Always close or always open). I am not sure which is the type of M821 but the switch that comes with the Brembo RCS works well on my bike.
one last thing how realeble is your 821 seems lots of complains about the driv by wire trottle ducati chood haf stay whit te cable not the wire ,but that is for the invyerment claener output from the exaust - safe the planet !!!
![Brembo RCS19 and RCS16 Master Cylinder | Longterm Review [My Experience]](http://i.ytimg.com/vi/fILhMftPSV4/mqdefault.jpg)
gone pick my 2019 821 up next week by the dealer ( previus ducati bikes 1994- 916 strada and 2006 monster s2r1000 ) also gona put it on my channel, hi from belgium
That sounds good. Hello from Vietnam!!!!
hello, can I ask you some questions?
Isn't the brake lever too far from the throttle grip?
Doesn't it touch the ignition switch??
How did you solve it?
Hi, that is the brake, not the clutch lever. For the break, you never have to pull it to touch the grip (or you can not if you install everything correctly). In my setup, when I pull the lever with the maximum force, it's still more than 1cm between the lever and the ignition switch.
hi, get a monster 1200 brake line think it wil fit the brembo rcs , happy new year
Thanks, I believe that the stock brake and clutch Master Cylinder on 1200 is the radial type already. So, the RCS or Corsa will fit. You will not need any adapter. Happy New Year!!
@@vothuat its fits the bike more (1 piece ) and yes ai was thinking also for the rcs , stock ones are ughly ( cafe racer has the ducati factory brake master cylinder looks great on the bike ) but instead ducati puts a cheap master on it , why ????
the brake light swiths can work not right -after instaling the brake light goes on and (yes haha ) when you brake its goes out
It depends on the type of the brake switch (Always close or always open). I am not sure which is the type of M821 but the switch that comes with the Brembo RCS works well on my bike.
monster 821 is not hydraulic clutch, so no pump need, there is just a cable clutch.. Monster 1200 is hydraulic with actuator.don't understand
@@MyAndreaChannel I installed a ducabike kit that change the cable clutch to hydraulic clutch. All part are plug n play.
How did you keep your mirrors on using the RCS? Is there a hole to put your mirrors through?
The bracket that comes with the lever does not have a hole to hold the mirror. I have to order a custom bracket from a CNC workshop.
one last thing how realeble is your 821 seems lots of complains about the driv by wire trottle ducati chood haf stay whit te cable not the wire ,but that is for the invyerment claener output from the exaust - safe the planet !!!
After 3 years and 16000 km, so far so good. The feeling of the drive-by-wire is a little bit delayed when you twist
San ka nakabili sir
From the motorbike workshop.