Goddag Mark! So happy to see you two still going strong and enjoying life and the RC World! Good attempt. Yeah, there must be a bottle-neck somewhere. Perhaps the motor yes. But 60 is wild on a brushed 14T. Think it’s about the same speed as my DT-02 with an 8T brushless. Would love to see how you changed that DT-02 if I find some time to go back in your videos. Looks very special. Well, best to you my mate. Hope the summer has been good to you. ❤
Goddag Mikael! It's so good to hear from you, I have been wondering how you are and what you are up to these days, my good friend. Ah yes, the trials of running a speed car, it's crazy trying to work out how to go faster, logic doesn't always work it seems. I know I can get this car to go a little faster though! Life here has been very tricky lately, still lots of health and family issues but we keep on smiling! I hope all is good with you and your lovely family. Take care mate! 😎🩵👊👍
Hi Glenn, this was filmed a couple of weeks ago and I've been trying since then. Seems the special motor isn't so special!!! 🤣 Good luck next week mate! 🤞😁👍
@@MarkBryanRC ah ok. Not good then. I have no speed run material backed up as yet but have 3 more motors sat waiting, plus pinion swpping too. All good fun though.
Nah I'm not having much luck mate! Seems I'm in the same boat you were in at the start! I had a little shunt in my real car last week so not done any speed running since. Going forward I'm not throwing any more money at this so get messing with those settings and I hope you can beat my 40! Definitely good fun!
@@MarkBryanRC Aww that sucks mate. Hope it wasn't too much damage. I am now going to play with what I have and then transfer stuff to the MF01X too... I don't have many funds now... will power disappeared and more parcels arriving here soon 🤣🤣🤣
Car wasn't too bad but it was a hit and run, they ran into the back of us and we have a bit of whiplash to nurse! Same here pal, all my stuff is being ported over to the MF01X, unfortunately that means no surprise increase in performance though!
Hi Mark, what you need is a bigger pinion and smaller spur not the bigger wheels, they just makee it harder for the motor to cope with. I have some experience with that experiment and it doesn't work. Back to the drawing board and see whats possible. Good luck mate.😊😊😊😊😊
Many thanks for the sage advice, Allan, really appreciated! Yep, the motor sure was straining with the big wheels. We are not allowed to change the spur but I can use a slightly bigger pinion, I'll give it a go when I get the chance. Cheers mate! 🍻😎👊👍
Oh no, hit the limits what it will do. I wonder if the HW ESC is restricting the amperage to the motor? Maybe a higher amp ESC may give it the kick in the pants it needs to wind out. Best of luck with it Mark, I know that was a bit deflating but I am sure you will get it sorted and bust past that 40MPH wall! Take care and have a great week!
Hi Addam and thanks for the thoughts! Yeah I was wondering about the ESC but I don't have anything else that will run down to a 10T motor, time to get head scratching! We will come back fighting soon my friend, all the best mate! 😎👊👍
Thanks Cat 🐈⬛ Yeah we will keep trying, it's all we can do as there are some much faster cars out there now... it's a lot of fun though! Cheers pal! 🍻😎👌👍
Thanks Kev - yeah it's all for fun really. It will be good to see Father and Son out again, I have no secret weapon so you got me beat already - now go and smash 50!!!! Good luck!
@@MarkBryanRC we have one more run in us so it will be all in good or bad. A friend let us borrow a little something. To be continued. It is all fun that's why I haven't touched the radio. It's nice to see my little buddy have a go at it.
Good to hear, pal! I think I can guess who that friend is! It really is good to see you and your little buddy enjoying the hobby together, this is what memories are made from!
Sorry, it didn't turn out as planned. Bigger wheels should add more speed at one turn of the wheel, but they also need more torque from the motor and add roll resistance at the same time. Maybe a 21T motor or higher might improve the missing force. One question: runs the car more stable now? Beside that, the car looks really cool. Have a great Sunday Mark.
Many thanks for the advice, Dirk! Yes, bigger wheels need more torque to turn them, my motor was not strong enough. I need to keep trying different options, lots of trial and error! My Sunday was good, hope you are having a great week! 😎👌👍
Ah mate..... The look on your face when you got that speed up on screen.....😩 I feel your pain mate, that's gutting. It was definitely worth a try, but it obviously wasn't liking that gearing, and the burnt pingies were a harsh notification of it. I'm sure someone of your knowledge and Wisdom will be able to come back with something better buddy. It's tough at the top!! 😉 👍 👍 👍
Cheers James - I know mate, you can read my face like a book! 😅 Not to worry though, I still got a few things to try, hope not to burn my fingers next time though! No way am I winning this though mate, I know there are some special motors up one or two sleeves out there! Fun taking part so it's all good! Cheers! 🍻😎👊👍
Been there done e that with my Rustler, doesn't work well just overheats the motor. Worth a try, in theory it should go faster but doesn't work in practice.😢😂😂
Thanks a ton, Gabriel! Yes I think you are correct. The motor was definitely overheating and I could feel the car was being held back. As you said, I think it was worth a shot. Need a more powerful motor! Cheers! 🍻😎🤝
Ooooohhh ☹️ bummer 👎 i wasnt expecting that ... the numbers went down instead of up. Hope you're feeling better and a case of back to the drawing board with lots of head scratching 👍 I will pop out later for another test run after the update video. Fingers crossed it will be a better attempt than what i currently have.... 🤔🤨🧐
I know Peter, bummer indeed, I was hoping for a better result but that's how it goes with speed runs! This was recorded a couple of weeks ago pal - still suffering from a bit of whiplash but it's getting better. Good luck with your run mate, these pesky brushless boys are ramping the speeds up! 😮 Fingers and toes crossed for ya, pal! 🤞🤞👌👍
Hi Mark, Thats was a nice try for testing out what those bigger tyres will do. I tried some 2.8" wheels and put them on my Aqroshot and it went like a missile 🏎 Just watched the F1 race, and as you know i am a McLaren fan so i was happy they won. But not the way it was done. Team orders suck 😉😞
Hi Are! Yes I have learnt a lot with these tests. I had bigger tyres on my Aqroshot and a 19T pinion, also very fast but the 12T motor overheated! Oh yes, the F1 race, I was willing Lando to keep going and ignore the team instructions. Bloody ridiculous! 😡
Hi mate, I laughed out loud when the vid started and there you were holding that bloody dragster...😂🤣. It's starting to look like Peter Perfect's car from Wacky Races. Tough luck on the 37mph, but I reckon you'll be back stronger than ever. I still think you'll win this. Have a good weekend, what's left of it..🙂👍🏻.
So good to hear it gave you a laugh, mate, we aim to please! 😅 Don't worry though, this failure means I'll be reverting to "non Whacky Races" wheels! Sometimes you gotta go backwards to go forwards... a little bit forwards at least. No way am I able to win this judging by what others have up their sleeves, I just got off to a good start mate! Thanks for the faith in me though - cheers! 🍻😎👊👍
Tell me about it mate, nearly burnt my fingers off! Not using those wheels again, lesson learnt! Fingers crossed I can squeeze another mph or two out of it Craig, cheers! 🍻😎👍
At least the big wheels might help you speed through all the rubbish, ha ha! It actually drives really well, straight as an arrow, very nice! Too bad with the overheating issues... I guess you need to break out that secret motor you got hidden away, ha ha! I need to hurry get an entry done for Peter, and after that it's all Poorboys speedgame, ha ha!
Oh that rubbish Mads, yes that was the idea!!! 😅 But yes, I'm chuffed with how well this extended chassis drives, it's so easy to keep on the straight and narrow. I knew this would get hot as all the motors I've run in this car have, it just got hotter though! That 10T motor is coming next my friend... Same here, gearing up for the PBRC SRC!!!! 😎👊👍
G'day me Mukka👩🤠, that's not what we expected mate, on the bright side it looks sensational Cobber👌, your front spoiler looks quality!. Good luck on your next pass mate🏁. Sheila says hello Mark🤩. Thanks for sharing your run video mate👍👧😁🦘🇦🇺
G'day me Ozzie mate! I know, it was a disappointment but we live and learn. Haha yeah it does look pretty cool all the same! We need that spoiler to keep the nose down my friend. Thanks for the good wishes and hello to Sheila too. 🩵 Thanks for the awesome support me Mukka! All the best from us up here in the Northern Hemisphere! 🙏😎👊👍
@@MarkBryanRC Sheila said " Hello me pomy mate😍" . Thanks Cobber👍. I was thinking the same thing, if it was that straight forward it wouldn't be called a challenge. Good luck mate👍.
@@MarkBryanRC As long as you're smiling, you're doing it right mate.!! Btw, I'm absolutely loving the TA02S chassis, it's so smooth.!! A real pleasure to drive & the 037 body looks 👌 👌 (well, it would if it was done in the correct Martini livery, but I'll rectify that as soon as I get over this bloody covid bug) 😉
@@MarkBryanRC Cheers Mark. Yeah, the whole village seems to have it at the moment.!! 🤯 😲.! There are only about 60 people living in it though, so it's not as bad as it sounds! 😉 😂 We only have one shop/PO/petrol station (next shop is 20 miles to the west or 40 miles to the east) so if one person has it & goes to the shop we're all likely to catch it.!! This is actually the first village wide covid outbreak.!! It's taken over 4 years for it to reach us.!!!
You got the MF01X for Fil's SRC too, great stuff glad to know your going for it this year too, just ordered mine today, hope it comes in time, with the bug body it should be fun. By the way which class you going to be running in this year, hope it's the brushless, we'll just have to wait and see.😊😊😊
Hi Allan, oh yes lots of us are joining in the fun this year, it's great! Hope to see you out there. I think I'll stick with brushed as usual. Good luck! 😎👊👍
good attempt marky bro that rear wheel diameter holding you back there brudda 😪😪i can hit 55mph on 6s with the truggy if i put smaller wheels i get about 40mph even though it looks faster etc if i put MT wheels its like 35 haha 😂😂theres some good gearing charts online too mind 👍when i had my TT years back i used to up the pinion to 28t (robinsons) and way lower the spur gear down always found me extra speed 😁
Many thanks my bro Dave! Yeah i got it wrong this time but you can't win 'em all! Oh man, 55 with that truggy is shifting mate! Yeah it's hard to tell just looking at the car whizzing past. Thanks for the info, I'll get working on the gearing and back to the smaller wheels - cheers brudda! 🍻😎👊👍
Hiya mate. Pleased to see that you made it out for another attempt. Not the result you were hoping for though. Like you say you must have reached the limit of that set-up and it just hasn't got the power to drive that gearing and heavy wheels. Could do with some wheels with that diameter but thinner. Anyway good try and best of luck with your future attempts 😁👍👍
Thanks mate, yeah this was filmed a couple of weeks ago, I have about 4 runs in the can from then! I agree, the motor is under strain but with ze rulez we don't have too many options. Basically, I need a better motor that can either spin faster or pull harder (ooh er!) but I ain't!!! Maybe I can eek another mph or two but that's me lot! Cheers for the kind words mate. 😎🤝
Oh man brother... That's not good dude!!! I did warn you that you can't over gear brushed motors.. Try it again mate but this time (next time) use the 19 tooth pinion.. Change only the pinion and see if it's faster with the same set-up. I'm rooting for you but you know I have to give my local homie (Kevin) more rooting.... Good luck my friend and our best to the family (Rob too)....
Haha, yes my friend, I do remember you warning me about over gearing! I just thought it might be OK but it wasn't!!! I think I'll go back to the smaller wheels and try to squeeze another mph or two out of it. Thanks for the rooting, but yeah I totally understand you gotta root for Kev and Dom! Thanks brother!
Superbe pointe de vitesse 👍👍👍
Félicitations 🎉🎉🎉
Many thanks - merci beaucoup - This car will go faster!! 😎👊👍
Love the old stick controller, brings back memories.
Thanks Jay - yep I do love my twin sticks, I can't get the hang of the steering wheel controllers! Cheers!
❤very cool 😎 racer ❤
We try! Thanks! 🏁😎👌😁👊🤘👍
Goddag Mark! So happy to see you two still going strong and enjoying life and the RC World! Good attempt. Yeah, there must be a bottle-neck somewhere. Perhaps the motor yes. But 60 is wild on a brushed 14T. Think it’s about the same speed as my DT-02 with an 8T brushless. Would love to see how you changed that DT-02 if I find some time to go back in your videos. Looks very special. Well, best to you my mate. Hope the summer has been good to you. ❤
Goddag Mikael! It's so good to hear from you, I have been wondering how you are and what you are up to these days, my good friend. Ah yes, the trials of running a speed car, it's crazy trying to work out how to go faster, logic doesn't always work it seems. I know I can get this car to go a little faster though!
Life here has been very tricky lately, still lots of health and family issues but we keep on smiling! I hope all is good with you and your lovely family. Take care mate! 😎🩵👊👍
It may not be faster but your DT-02 looks epic with the big wheels and I think you'd be the winner in the "Wacky Races" class 😀👍🏼👍🏼
Thanks Derek, yeah this thing does look insane with the Wacky Races wheels, pity they didn't produce a wacky speed! All the best my good friend! 😎👊👍
Oooh.... special motor hidey place then? 😊😊
I hope to get another run next week 👍👍
Hi Glenn, this was filmed a couple of weeks ago and I've been trying since then. Seems the special motor isn't so special!!! 🤣
Good luck next week mate! 🤞😁👍
@@MarkBryanRC ah ok. Not good then. I have no speed run material backed up as yet but have 3 more motors sat waiting, plus pinion swpping too.
All good fun though.
Nah I'm not having much luck mate! Seems I'm in the same boat you were in at the start! I had a little shunt in my real car last week so not done any speed running since. Going forward I'm not throwing any more money at this so get messing with those settings and I hope you can beat my 40! Definitely good fun!
@@MarkBryanRC Aww that sucks mate. Hope it wasn't too much damage.
I am now going to play with what I have and then transfer stuff to the MF01X too...
I don't have many funds now... will power disappeared and more parcels arriving here soon 🤣🤣🤣
Car wasn't too bad but it was a hit and run, they ran into the back of us and we have a bit of whiplash to nurse!
Same here pal, all my stuff is being ported over to the MF01X, unfortunately that means no surprise increase in performance though!
Although not the outcome you’d hoped for, it does look pretty bada$$!
Entertaining as always fellas!👍😊
Thanks Jeremy - you are totally correct my friend! Looks good even if it's slower! We will keep trying to add those mph - cheers! 🙏😎👍
With those big rear wheels looks like Peter Perfect car out of Wacky Races 🙂At the limit of the car.
Haha you got that right Mal! Definitely pushing the limits but hope there is a bit more in this car! 😎👍
Hi Mark, what you need is a bigger pinion and smaller spur not the bigger wheels, they just makee it harder for the motor to cope with. I have some experience with that experiment and it doesn't work. Back to the drawing board and see whats possible. Good luck mate.😊😊😊😊😊
Many thanks for the sage advice, Allan, really appreciated! Yep, the motor sure was straining with the big wheels. We are not allowed to change the spur but I can use a slightly bigger pinion, I'll give it a go when I get the chance. Cheers mate! 🍻😎👊👍
Hello Mark!! Hello Rob!! First comment!
Hello McPaul! Definitely FIRST 🏁across the comments line pal!
Oh no, hit the limits what it will do. I wonder if the HW ESC is restricting the amperage to the motor? Maybe a higher amp ESC may give it the kick in the pants it needs to wind out. Best of luck with it Mark, I know that was a bit deflating but I am sure you will get it sorted and bust past that 40MPH wall! Take care and have a great week!
Hi Addam and thanks for the thoughts! Yeah I was wondering about the ESC but I don't have anything else that will run down to a 10T motor, time to get head scratching! We will come back fighting soon my friend, all the best mate! 😎👊👍
Nice try mate, thanks for your upload mate 👍🙏🐱
Thanks Cat 🐈⬛ Yeah we will keep trying, it's all we can do as there are some much faster cars out there now... it's a lot of fun though! Cheers pal! 🍻😎👌👍
Nice run bud. Dom and I haven't been able to get back out but hopefully today is the day. We have some secret weapons as well.
Thanks Kev - yeah it's all for fun really. It will be good to see Father and Son out again, I have no secret weapon so you got me beat already - now go and smash 50!!!! Good luck!
@@MarkBryanRC we have one more run in us so it will be all in good or bad. A friend let us borrow a little something. To be continued. It is all fun that's why I haven't touched the radio. It's nice to see my little buddy have a go at it.
Good to hear, pal! I think I can guess who that friend is! It really is good to see you and your little buddy enjoying the hobby together, this is what memories are made from!
Sorry, it didn't turn out as planned. Bigger wheels should add more speed at one turn of the wheel, but they also need more torque from the motor and add roll resistance at the same time. Maybe a 21T motor or higher might improve the missing force.
One question: runs the car more stable now?
Beside that, the car looks really cool. Have a great Sunday Mark.
Many thanks for the advice, Dirk! Yes, bigger wheels need more torque to turn them, my motor was not strong enough. I need to keep trying different options, lots of trial and error! My Sunday was good, hope you are having a great week! 😎👌👍
Looks like a proper dragster with those rear tyres Mark 😊. Watch your fingers on that motor lol. Top stuff mate
Cheers Tibs! Yeah I'm definitely going for the dragster look! Not touching that motor again 🤣👍
Ah mate..... The look on your face when you got that speed up on screen.....😩
I feel your pain mate, that's gutting.
It was definitely worth a try, but it obviously wasn't liking that gearing, and the burnt pingies were a harsh notification of it.
I'm sure someone of your knowledge and Wisdom will be able to come back with something better buddy.
It's tough at the top!! 😉
👍 👍 👍
Cheers James - I know mate, you can read my face like a book! 😅
Not to worry though, I still got a few things to try, hope not to burn my fingers next time though!
No way am I winning this though mate, I know there are some special motors up one or two sleeves out there! Fun taking part so it's all good! Cheers! 🍻😎👊👍
Never mind Mark 😊 better luck next time. It still was a brilliant video, you pair make me laugh 😅 love to you & your lovely family 😊
Thank you so much Kim! 😁 Yes I will keep trying and hopefully keep smiling too! Love to you and yours too my friend! 😘🙏🩵👍
Nice one. Maybe the wheels were a bit too big, we could sense it did not want to go 😢 It was worth a try 👍🤝
Been there done e that with my Rustler, doesn't work well just overheats the motor. Worth a try, in theory it should go faster but doesn't work in practice.😢😂😂
Thanks a ton, Gabriel! Yes I think you are correct. The motor was definitely overheating and I could feel the car was being held back. As you said, I think it was worth a shot. Need a more powerful motor! Cheers! 🍻😎🤝
Cheers Allan - too right, theory and practice don't always match up! 😅👍
Great run guys and fun as always!
Thank you so much buddy! Slower but still good fun trying! Cheers! 🍻😎👍
Ooooohhh ☹️ bummer 👎 i wasnt expecting that ... the numbers went down instead of up.
Hope you're feeling better and a case of back to the drawing board with lots of head scratching 👍
I will pop out later for another test run after the update video.
Fingers crossed it will be a better attempt than what i currently have.... 🤔🤨🧐
I know Peter, bummer indeed, I was hoping for a better result but that's how it goes with speed runs!
This was recorded a couple of weeks ago pal - still suffering from a bit of whiplash but it's getting better.
Good luck with your run mate, these pesky brushless boys are ramping the speeds up! 😮
Fingers and toes crossed for ya, pal! 🤞🤞👌👍
Hi Mark,
Thats was a nice try for testing out what those bigger tyres will do.
I tried some 2.8" wheels and put them on my Aqroshot and it went like a missile 🏎
Just watched the F1 race, and as you know i am a McLaren fan so i was happy they won. But not the way it was done. Team orders suck 😉😞
Hi Are! Yes I have learnt a lot with these tests. I had bigger tyres on my Aqroshot and a 19T pinion, also very fast but the 12T motor overheated!
Oh yes, the F1 race, I was willing Lando to keep going and ignore the team instructions. Bloody ridiculous! 😡
Hi mate, I laughed out loud when the vid started and there you were holding that bloody dragster...😂🤣. It's starting to look like Peter Perfect's car from Wacky Races. Tough luck on the 37mph, but I reckon you'll be back stronger than ever. I still think you'll win this. Have a good weekend, what's left of it..🙂👍🏻.
So good to hear it gave you a laugh, mate, we aim to please! 😅 Don't worry though, this failure means I'll be reverting to "non Whacky Races" wheels! Sometimes you gotta go backwards to go forwards... a little bit forwards at least. No way am I able to win this judging by what others have up their sleeves, I just got off to a good start mate! Thanks for the faith in me though - cheers! 🍻😎👊👍
Nice idea Mark but you gotta watch that overheating pal 😂🤣 Keep pushing it buddy! There is more in this chassis yet bud
Tell me about it mate, nearly burnt my fingers off! Not using those wheels again, lesson learnt! Fingers crossed I can squeeze another mph or two out of it Craig, cheers! 🍻😎👍
At least the big wheels might help you speed through all the rubbish, ha ha!
It actually drives really well, straight as an arrow, very nice! Too bad with the overheating issues... I guess you need to break out that secret motor you got hidden away, ha ha!
I need to hurry get an entry done for Peter, and after that it's all Poorboys speedgame, ha ha!
Oh that rubbish Mads, yes that was the idea!!! 😅 But yes, I'm chuffed with how well this extended chassis drives, it's so easy to keep on the straight and narrow. I knew this would get hot as all the motors I've run in this car have, it just got hotter though! That 10T motor is coming next my friend...
Same here, gearing up for the PBRC SRC!!!! 😎👊👍
You need a longer runway buddy
Many thanks, Thad, we are working on that one pal! 😎👌👍
G'day me Mukka👩🤠, that's not what we expected mate, on the bright side it looks sensational Cobber👌, your front spoiler looks quality!. Good luck on your next pass mate🏁. Sheila says hello Mark🤩. Thanks for sharing your run video mate👍👧😁🦘🇦🇺
G'day me Ozzie mate! I know, it was a disappointment but we live and learn. Haha yeah it does look pretty cool all the same! We need that spoiler to keep the nose down my friend. Thanks for the good wishes and hello to Sheila too. 🩵 Thanks for the awesome support me Mukka! All the best from us up here in the Northern Hemisphere! 🙏😎👊👍
@@MarkBryanRC
Sheila said " Hello me pomy mate😍" . Thanks Cobber👍. I was thinking the same thing, if it was that straight forward it wouldn't be called a challenge. Good luck mate👍.
Many thanks Bruce, and Sheila too of course!!! 🙏😎🩵👊👍
😎👍starting to look like something out of mad max 😂
You got that right, Chris - crazy isn't it?!?!?! I'm going back to the smaller wheels! 🤣👍
Well, errrr... It's certainly unique.! 😉
It's a blunt instrument Alan, that's for sure!!! But it's function over beauty for speed runs! Cheers mate! 😎👊👍
@@MarkBryanRC As long as you're smiling, you're doing it right mate.!!
Btw, I'm absolutely loving the TA02S chassis, it's so smooth.!!
A real pleasure to drive & the 037 body looks 👌 👌 (well, it would if it was done in the correct Martini livery, but I'll rectify that as soon as I get over this bloody covid bug) 😉
@@alantaylor353 Oh man, sorry to hear you got Covid - it seems to be on the rise again, god help us! Hope you're feeling better soon!
@@MarkBryanRC Cheers Mark.
Yeah, the whole village seems to have it at the moment.!! 🤯 😲.! There are only about 60 people living in it though, so it's not as bad as it sounds! 😉 😂
We only have one shop/PO/petrol station (next shop is 20 miles to the west or 40 miles to the east) so if one person has it & goes to the shop we're all likely to catch it.!!
This is actually the first village wide covid outbreak.!!
It's taken over 4 years for it to reach us.!!!
You got the MF01X for Fil's SRC too, great stuff glad to know your going for it this year too, just ordered mine today, hope it comes in time, with the bug body it should be fun. By the way which class you going to be running in this year, hope it's the brushless, we'll just have to wait and see.😊😊😊
Hi Allan, oh yes lots of us are joining in the fun this year, it's great! Hope to see you out there. I think I'll stick with brushed as usual. Good luck! 😎👊👍
good attempt marky bro that rear wheel diameter holding you back there brudda 😪😪i can hit 55mph on 6s with the truggy if i put smaller wheels i get about 40mph even though it looks faster etc if i put MT wheels its like 35 haha 😂😂theres some good gearing charts online too mind 👍when i had my TT years back i used to up the pinion to 28t (robinsons) and way lower the spur gear down always found me extra speed 😁
Many thanks my bro Dave! Yeah i got it wrong this time but you can't win 'em all! Oh man, 55 with that truggy is shifting mate! Yeah it's hard to tell just looking at the car whizzing past. Thanks for the info, I'll get working on the gearing and back to the smaller wheels - cheers brudda! 🍻😎👊👍
@@MarkBryanRC yeah i didnt realise you cant change spur sorry brudda weight saving i guess?
@@fpvDRE I could try a little less weight but brudda, I NEED MORE POWER!!! 😅😅
Hiya mate. Pleased to see that you made it out for another attempt. Not the result you were hoping for though. Like you say you must have reached the limit of that set-up and it just hasn't got the power to drive that gearing and heavy wheels. Could do with some wheels with that diameter but thinner. Anyway good try and best of luck with your future attempts 😁👍👍
Thanks mate, yeah this was filmed a couple of weeks ago, I have about 4 runs in the can from then!
I agree, the motor is under strain but with ze rulez we don't have too many options. Basically, I need a better motor that can either spin faster or pull harder (ooh er!) but I ain't!!! Maybe I can eek another mph or two but that's me lot! Cheers for the kind words mate. 😎🤝
Good effort mate 👍 but shame you didn't get over the 40🤷 better luck next time dude 🍻🍻
Thanks Mark, I know, it can go faster but not with huge tractor tyres - lesson learnt! 😅 All the best! 😎👌👍
Tighten your wheelnuts! What would you change in terms of gearing with the bigger wheels to offset the overheating?
Haha - wheelnuts tight!!! 😅 Cheers my friend, I think it needs a smaller pinion but I'm switching back to the buggy wheels, lesson learnt! 🤣😎👌👍
Great video as usual folks. What speed devices are being used here please? I'd like to have a go myself, cheers
Nevermind, I've found it 🙂
Glad you enjoyed it and found the GPS speed meter! Have fun with it! 😎👊👍
Oh man brother... That's not good dude!!! I did warn you that you can't over gear brushed motors.. Try it again mate but this time (next time) use the 19 tooth pinion.. Change only the pinion and see if it's faster with the same set-up. I'm rooting for you but you know I have to give my local homie (Kevin) more rooting.... Good luck my friend and our best to the family (Rob too)....
Haha, yes my friend, I do remember you warning me about over gearing! I just thought it might be OK but it wasn't!!! I think I'll go back to the smaller wheels and try to squeeze another mph or two out of it. Thanks for the rooting, but yeah I totally understand you gotta root for Kev and Dom! Thanks brother!
two steps forward , one back . nevermind . anything you can do with the aerodynamics . 🤷♂️👍
Too right Dom! It's all trial and error, but mainly error I'm afraid! 😅 It's about as streamlined as I can get it pal! 😎👍
@@MarkBryanRC yeah it’s like a dragster 😂👍