ฝัง
- เผยแพร่เมื่อ 9 พ.ค. 2014
- Video of my 5.3L 2012 GMC Sierra 1500 SLT showing the difference in acceleration as well as the engine, exhaust and drive by sounds. This is the K&N 77 series cold air intake. The performance and fuel mileage gains are very minuscule from my experience. It just made the truck sound awesome under hard acceleration. Plus I'll never have to buy a new air filter again. Sorry about the poor quality of the video. I now have a better editing program and all my new videos are in HD.
Link to this CAI:
www.autoanything.com/air-intak...
K&N Cold Air Intake Installation:
• K&N 77 Series Cold Air...
Exhaust: Flyby's and Hard Acceleration:
(Before engine swap) • 2012 GMC Sierra Exhaus...
(After engine swap) • Cammed 6.2L Exhaust: F...
Check out my Facebook page for behind the scenes stuff:
mncarguy - ยานยนต์และพาหนะ
![Cold Air Intakes Mythbusted [Naturally Aspirated]](http://i.ytimg.com/vi/xwNtjKT_1cA/mqdefault.jpg)
![Cold Air Intakes Mythbusted [Naturally Aspirated]](/img/tr.png)
![[MPD직캠] 베이비몬스터 직캠 8K 'FOREVER' (BABYMONSTER FanCam) | @MCOUNTDOWN_2024.7.11](http://i.ytimg.com/vi/ylRx8QOuGXo/mqdefault.jpg)
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 5](http://i.ytimg.com/vi/g5wpgeAIzMs/mqdefault.jpg)
Honestly one of the more solid video examples. Straight to the point
Good results, I put one in my Jeep and I definitely hear the air getting sucked into the intake in the higher rpm’s, I love it
will be getting one because of this video.
Indeed along I believe it’s called a magma flow exhaust
Me to
@@thealaskanhusky9614 I honestly suggest flowmaster
I see a lot of people bashing because the truck is too loud..... I don't get that.... with a cold air intake, the only time there is a significant change in tone is under heavy throttle... which is loud anyways. it's not so much louder as much as throatier. there is barely a difference under normal loads.
Exactly! I'm glad you understand. But hey, anything that's even 1 decibel louder than stock is considered immature and a nuisance to everyone around you these days..
@@mncarguy which is why it's time to put a Corsa exhaust on my xjs v12
@Suns Out Guns Out have you blown anyone's ears out yet? Lol that's sweet
youre right. ordered one simply for the 3 mpg difference i get now (with a lifted sierra on 35s ill take all the mpg i can get lol). the throatier sound and better throttle response under load is just an added bonus.
@@mncarguyyour truck isn’t even loud. Shes’s just got a good tone. I don’t see why people are bashing you.
Just watching this clip, convinced me to put the cold air intake back to work.
Perfect video all around. Thank you, exactly all I wanted to see and hear.
Thanks for showing the different comparisons. Love it! I'm gonna do this as my first upgrade to my 2016 Silverado.
No problem, glad I could help! Good luck with getting yours upgraded.
me too!!!
Phil Yuup
no... get the afe momentum gt.. dyno proven 36 h.p for the 6.2
Wow, so much time and effort making this video. Well done.
Probably one of the better cold air intake videos!
That sound never gets old
Love it simple, no talking, all action.
The differences I noticed were with the filter the RPM's shot up a lot more than without it, and the you could definately hear a difference when revving it
Super good video. Helps out a lot on when deciding on wether I should buy it
thanks for your effort man i really liked your video!!!!
This is insane. The transformation is out of this world. Getting one ASAP
Dylan Mason did you get one? Do you have to reprogram anything or just bolt it on?
Abdullah Al-Shimri you just bolt it on
Seems like it sounds and performs great. I will be getting one for my 96 Silverado here soon
Got one yesterday for my dodge and will be picking it up tomorrow: can’t wait!
i have the same intake in my 2011 chevy silverado 1500. i love it!
Love the video we got the point on this one😁
Great video sitting in my truck at oreillys, thought I'd do a search for a k&n thanks
Thanks, glad I could help!
Thanks for a great comparison video.Got one for Christmas,putting it on my Silverado tonight.Should sound nice paired with my flowmaster 40.
Yeah buddy! I had a super 40 on mine too and it sounded great with the CAI!
I beg to differ. I put a K & N cold filter on my 2015 Silverado with a 4.3 V 6. I'm getting 21mpg highway. My city mileage is around 17 mpg up from 14 mpg. Now I also run dura lube in my oil pan, by advise of my buddy who is a pro mechanic. I run Castrol synthetic. Also I beg to differ on sound, its not that loud even when accelerating. It is however way more responsive, thus faster and quicker. Having a steady foot on the gas pedal or using cruise control helps as well. In my own opinion, I am very happy with my results.
K & N does make a difference in sound. I would only assume it would give more power since it pulls in more fresh cold air. Mine sounds great.
Mine makes it sound different in sound, guess it depends
Is there a certain intake that can make your car louder?
Agreed I installed one on my 2015 Camaro yesterday and it’s way louder and the response time is oddly better
Just did this to my silverado and didn’t get to send it to the max because of the snow but from what I heard I loved it
Best intake video out there thanks for making it!
You're welcome
@@Jalisco38 you’re sexy.
I added a K&N drop in air filter to my 09 f150 4.6l v8 3v and a high performance exhaust. It did help the power and the mileage ... It just depends. Also I plan to possible have it tuned as well.
Awesome video and it sounds like you got a little bit more engine response sweet deal I'm going to put one in my 97 4.6
Great video. All the facts needed. No BS. Thanks alot
Great video this is exactly what us cant deciders look for 👍🏿
It sounds good ! I was looking at a TRD intake for my 2016 Tundra, watched both here, had K&N CAI on my last 3 Fords, I'm gonna stick with them for the Tundra. I just think they're better, definitely sound better ! PS, 2008 F-150 4X4 still runs great, wife drives it, 200,000 miles ! With Castrol synthetic & K&N. Gonna be pretty tough to beat that record. All I've done to it besides K&N CAI is brakes, tires ! Excellent Trucks !
Videos don’t do justice trust me. This stuff is legit
Love how your truck sounds
Thanks!
i did like my old one thinking on getting another ;)
sounds great , nice truck.
What are your thoughts putting the k & n intake on a 2007 yukon denali xl? Im more interested in increasing gas mileage, but after watching your video, i wouldnt mind even more growl and quicker pick up before 3rd gear.
I just got my KNN today UPS. Thanks for the video, your truck sounds aggressive. War Eagle
Great video👌🏽
My cam and this intake will be super nice
How was the performance between stock and modified?
It definitely made a difference for a big body truck 👍👍
I bought the $300 kit for my 03 Sierra and it did kinda sounded a bit good despite I bought the truck with an old Flowmaster on it at the time but I switched up the Flowmaster and sounds alot better but performance wise I need to get my truck tuned
Nice truck, I love the interior on the 19 gmc’s!!! Oh wait sorry dude looks just like an 19
My 2006 F150 is 11 yrs old..I put this intake in 07....my truck now has 140k miles and still going strong....I clean the filter every 6 months and clean my throttle body every year. No problem with my old truck.
Los Critics Supreme
amazing comparison video...thank you
+ExS Turned On No problem. Thanks for watching!
I should thank you for this video!
Thanks for the video
Sounds great
Can anyone tell me if by installing this mod if I will get any check engine codes popping up on me . I've heard of this happening before and don't wanna waste money if there's even a chance. I live in Massachusetts and they're stupid strict on inspection bullshit.thanks!
Just got mine, it’s shipping now 😋😋😋
Seems like all cai extend how long a vehicle holds revs. I love that sound. God, it sounds sooo much more throaty, too. Damn, I love these fuckin things.
Really?
Awesome video. I'm about to buy one of these for my Chevy and I'm glad I saw this. What were the major changes, as far as mileage and acceleration? Again, thank you for them demonstration!
+Kevin Martinez Thanks for watching! I didn't notice much of a difference except for gaining maybe 1 mpg and one hell of a badass sound coming from under the hood. I've put around 17k miles on it since installing it and nothing has come loose or anything like that. It's definitely paying for itself. Hope yours turns out how you want.
Thank you for sharing this. I'm a female and wasn't sure what the difference would sound like and if I'd like it in my new truck. This was perfect and definitely what I needed to see. Thanks again! 💯
Why does your gender matter
@@lethargicstove2024 what I said
@@zmrq I know kind of stupid
The next step to get full benefits from a cold air intake is a larger throttle body which also involves a larger intake manifold 😊 then exhaust then a cam which inevitably leads to a bigger displacement motor...😅
I prefer the drop in filters that use your stock system since this type of air filter can actually suck in more hot air than cool because of its shape! But this is a good video
Great demonstration
Thank you sir! I'll have a before and after demo of my DiabloSport Trinity T1000 tuner coming soon.
So the Intake made the tone of the exhaust change correct?
A cold air intake without a shield isn’t really “cold”.
Atleast it has the sides lol. It has rubber around it so it might fit to the hood
With the rubber seal on top once you close the hood it makes a box
@@2jzfrank thank you that’s what I was tryna get out lol
it has a shield.
@@Schwifty1055 Its got the shield , bottom is right off the front, top seats to the hood, Got one on my 2018
This vid actually helped me
Glad to hear!
mncarguy what did it cost yu?
Around $250.. It sounds good and I'll never have to replace it's pretty overpriced.
That sounds way better.
good video man, thanks !
No problem!
Where did u buy it
How much does it improve fuel economy if it does?
Did you also get a dyno tube?
Badass truck.
It's real simple..the quicker you can get air and gas into the engine the more H.P. The K&N intake is much less restrictive air flow and it sounds Grrrreat.
Aren't cold air intakes bad for your car in the long run?
Well I see I’m a lil late to the party, 7 yes looking at the date but better late than never.
Really appreciate this video had a lot of questions and concerns and this answered them all, have a 1995 Chevy short wide had with a 4.3 and 345k on the motor 200k we’re mine personally it finally gave up on me, i got a 305 from a guy at work for the price of hauling it off it had 62,000 thsnd when pulled, threw it in my truck on a wknd. It’ll be a DD nothing special everyone said throw a cold air intake on it if I’m not gonna sell it to any at work or Ls swap it like everyone is doing and just Roll it till the wheels fall of or this motor goes out
What’s the difference between a cold air intake and a gas air intake
You need a programmer to change your shift points.Mine shifts at 6200 rpm instead of your 5400 rpm.If you really like to go fast.And an exhaust system that flows.Plug and play stuff....
matt schenden what motor do you have? Not worried about that being a little high for the motor? Really close to valve float I think for the Ls 5.3
@@LWNDmax valve float? Lol ok. You can turn that motor 7k with no problems.
randy schmidt there's no way with stock springs dude
@@LWNDmax you are right but I think dude is confused about valve float
How tf do i do that with my car lmao?
For anyome asking or commenting on noticeable differences. The only noticeable difference an aftermarket intake is ever going to make is sound. That's going to be it %99.99 of the time. If by chance you end up getting better gas mileage it will be negligible. As far as acceleration is concerned, especially on an otherwise stock vehicle you might actually notice it being slower. This was actually true for me once, a few years ago on a BMW 335i. I had ordered a mountain of parts all at once. I was planning on doing some of the installs myself and started with new brakes and the cold air intake. I shit you not there was a noticeable difference in acceleration from a stand still. It was slower. Not long after I had full exhaust (not headers) and tune done. After all of that I had a pretty sizeable hp increase and better acceleration as well as sounding awesome. You can find people all over TH-cam doing actual dyno runs and tests with just a CAI and sadly the results show that the majority of us have been taken, bamboozled, conned (u get the picture) for years. Albeit, adding an intake will typically sound pretty good. Oh, and to the owner of the truck, that's definitely a nice good looking truck, and sounds great man. Honestly that change in sound with just the intake is pretty impressive. That's definitely a cheaper route to get some sound out of it than an exhaust system. I guess, depending on how loud you want to be.
Chris Brewer i agree with you, i was eager to get this gear as a truck guy but honestly all it does is to change the sound. just look and hear cool
+dide quen "hear" ?? You mean "sound" ??
So you're contention is that the hundreds (maybe thousands?) of independently-made videos showing dyno tests of 10-15hp increases are all fake? I literally have yet to find even one single video of a dyno test that shows there's no or negligible difference after installing a cold air intake system.
* Waste, you idiot
DARK OVERLORD depends... stock air boxes are restrictive due to manufacturers & that depends on the vehicle as well. But if people want better performance you can go cold or short ram but you only gain performance if you have cooler air reaching the engine. Best thing to do is wrap the air intake tubing with a reflective heat sheet or wrap and an build your own heat resistant air box. The metal and plastic pieces of crap some manufacturers sell don’t really reflect he they are for looks & the further you can move you air intake from the engine the better. Air intakes do add performance! But only if done right!
Better response
hi bro, I think you have to go to the dyno and do all the tests to see the difference between the stock intake manifold and the new brand intake because I can't see much difference before and after installing the new intake .
peace.
Nice video man. Besides the K&N do you have anything else installed. Like a flowmaster for example.
Yup, I have a true dual Flowmaster exhaust system with shorty Pacesetter headers. It was installed after this video so you can hear and see it here:
th-cam.com/video/31QPxQ2oSf4/w-d-xo.html
To be honest it looks exciting and makes the muffler sound deeper but that’s it nothing else , it’s all in our minds
What cold air intake would you recommend for a 1993 Chevy C1500 350 engine. Only looking to pay around $150 or less.
I think this would be your best bet since it's a direct fit kit Sorry I'm not much help. I just prefer easy installation..
www.autoanything.com/air-intakes/kn-63-series-aircharger-high-flow-intake-kit
It sounds a lot better with k&n.
Looks whole lot faster
What is the pinging sound?
It does alow more air in,but what about filtration
If I have a flowmaster super 10 series on my truck, would a cold air intake make it sound better?
It'd make your truck sound better both coming and going. You can hear the roar of the engine much more with the cold air intake.
Sounds identical to me when I play 1:00 and 1:20 back to back.
I just got rid of the resonator in my 2006 Colorado 5,3 and I’ve noticed more torque
True. But don't ever remove the catalytic converters; you'll lose all torque.
I like that truck damn
Thanks! It's a Heritage Edition so it's a semi rare color :)
I tell you what, them oil bath filters are MESSY! I need to get me one of these!
definitely sounds better....not sure about any HP though on a gas engine
Dude cold air intakes makes your car sound better and you could hear your engine and you could also hear it sucking air and you could see that the revs go faster a little
Gain any hp?
I don’t think they address the issue of life of engine decline due to added stresses
I hear the difference
Since the install has your check engine light come on?
I never had it come on
What did you do to the vacuum line that plugs into where the old intake goes over top the motor?
If you're referring to the crank case vent tube, there's a spot for it to plug in on the K&N intake.
mncarguy I didn't get a K&n I got an eBay one and it doesn't fit
Yeah, ebay is not the best. I don't think you technically have to have the hose plugged into the intake anyway.
You have a 2012 GMC and it's still running? wow-what happened?
Oh that's to bad, thanks man
No problem!
Did you had to drill any holes for installation?
I did for the mounting plate. Here's the installation video.
th-cam.com/video/PnnKXpjup7A/w-d-xo.html
El filter k&n funciona bien
Engine temp change with cold air intake ?
wondering same.
Not a very fair video. The before portion was from a dead stop while the after portion you did a brake start. That in itself, even without the cold air intake, makes a big difference in acceleration. Can't fully rely on the beginning of this video. You can definitely rely on the noise differences though.
Did you find you got better gas milage as well ? Thanks
I maybe gained 1 mpg.. I was disappointed but it still makes the truck sound amazing.
What was that noise after he installed the cold air intake that sounded muffled when he had the hood open ?
That hiss sound when the truck turns off is the crank case vent tube. You can hear that sound in most vehicles with a cold air intake.
mncarguy I just recently installed one on my 2016 Yukon Denali 6.2 makes the same noise when in park and revving up the engine just making sure thanks !
mncarguy and I mean the sound on video time 2:36-2:37 ?