Budget Shimano 1x11 Drivetrain Upgrade - 2022 Trek Marlin 5 MTB

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 109

  • @ks_dirtbiker684
    @ks_dirtbiker684 ปีที่แล้ว +11

    Huge appreciation for posting this and the parts list. Going to convert my new marlin 5.

  • @PS.sounds-il7rf
    @PS.sounds-il7rf 8 หลายเดือนก่อน +1

    Exactly the upgrade video I needed to see!

  • @LTapsy
    @LTapsy ปีที่แล้ว +2

    hey, would this crankset work on a 1x12 conversion? Hoping for a reply, Im new to mountain biking and this will be my drivetrain DIY

    • @olivermtb4596
      @olivermtb4596 ปีที่แล้ว +1

      yea it would work but you have to get a new back wheel if you run an 8 speed

    • @LTapsy
      @LTapsy ปีที่แล้ว +1

      @@olivermtb4596 im planning to use the sram NX PG1230, which I believe is a straight swap from 2x8 cassette. and then im planning to use the crankset from your video. so I dont have to replace the BB. please let me know if you think I would work.

    • @olivermtb4596
      @olivermtb4596 ปีที่แล้ว

      @@LTapsy are you using 29 and 27.5 inch wheels? Because you most likely have to get a new rear wheel because of the freehub and a 12 speed cassette wont fit on a 8 speed freehub body and is it quick release or a thru axle hub and dropouts?

    • @LTapsy
      @LTapsy ปีที่แล้ว

      @@olivermtb4596 its 29. I dont get it. I see people with 2x8 and converting it to sram NX 12 speed group set. The only thing they need is a BSA BB.

  • @bacorny5980
    @bacorny5980 ปีที่แล้ว +2

    would this work on a marlin 4?

  • @faustopastrone7111
    @faustopastrone7111 หลายเดือนก่อน

    would it also work if I wanted to fit a new Shimano Deore crankset with a 73mm BSA BB? thanks!

  • @sethdunn4412
    @sethdunn4412 ปีที่แล้ว +2

    Thanks for this. Do you know if the Shimano FC-M361 175mm 42/32/22 chainring would work if only using for the crank arms? Planning on going with the same chainring as you.

    • @PangazShed
      @PangazShed  ปีที่แล้ว +2

      Yes, it should have the same BCD of 104-64mm

  • @Y2hlc3Rlcg
    @Y2hlc3Rlcg 10 หลายเดือนก่อน +2

    what model can you recomment if i want to "upgrade" my 2023 trek marlin 4 gen 2, to a 1 x 9 or maybe 1x10 drivetrain. bit confused on the compatibilit. sorry for newbie question

    • @sergior6249
      @sergior6249 5 หลายเดือนก่อน

      If your Marlin 4 is an eight speed, you should be able to go up to an 11 speed and anywhere in between.

  • @matuskulisek5429
    @matuskulisek5429 ปีที่แล้ว +1

    Hello! Nice work, can I ask if I want to upgrade my 3x8 to 1x11 do I need new BB?

    • @PangazShed
      @PangazShed  ปีที่แล้ว

      Hi, I didn’t use a new bottom bracket because I used a crankset that allowed me to unbolt the old chainrings and put a single Raceface chainring on. This allowed me to retain the original bottom bracket.

  • @OneStepClosa
    @OneStepClosa 8 หลายเดือนก่อน

    Greets from Germany. Have all parts now at Home and will do the Same. Thx for uploading.

  • @108Hawke
    @108Hawke ปีที่แล้ว

    Firstly great video! Second I used the exact same shimano crank and my chain instantly falls off the front chain ring. I mounted my single chain ring on the inside of the crank like you did to give it the best chain line possible. Weird I used the exact same parts on a marlin 5 gen 2 and it causes the chain to drop off the front within a couple pedal strokes. The only way I can see to make it work is to actually space the front chain ring toward the bottom bracket.

    • @PangazShed
      @PangazShed  ปีที่แล้ว

      Thanks for watching. Annoying issue you are having, just a thought, is the chain compatible with your setup? Cheers!

    • @108Hawke
      @108Hawke ปีที่แล้ว +1

      @@PangazShed Thanks for the reply. I Tried the factory chain and another brand new one. Both of which should work. As soon as I put the old 2x front chain ring on the bike has no issues at all on either chain ring. When I measure the chaine link with the single chain ring its outside of what the spec is for my bike. Really odd. Again appreciate the reply1

    • @OneStepClosa
      @OneStepClosa 8 หลายเดือนก่อน

      ​@@108Hawke Did you solve your Problem?

    • @108Hawke
      @108Hawke 8 หลายเดือนก่อน

      @@OneStepClosa I did. It was actually the cheap chain ring that was the issue. I had used an Amazon chain ring. When I replaced it with a brand name one the problem was fixed. Likely just got a bad one as I’ve used other Amazon chain rings and haven’t had an issue.

  • @nelsonenaccion4x424
    @nelsonenaccion4x424 8 หลายเดือนก่อน

    Outstanding UPGRADE no just becose the color the way the bike is going to Performance now

  • @nyreppin1
    @nyreppin1 ปีที่แล้ว

    I'm confused as to how your Marlin came with an 8sp freehub when all the Marlin 5's come with 7sp freehubs. I'm having the worst time figuring this out. I have no idea what driver fits in the dc-27 that i have

    • @PangazShed
      @PangazShed  ปีที่แล้ว

      My Marlin 5 was a 2022 model (it was bought mid- late 2021) so that’s probably why is has the dc-22 hub. Mines not technically a gen 2 Marlin but perhaps these are the differences between the 2021 Marlin 5 and the 2022.

  • @martinp6926
    @martinp6926 ปีที่แล้ว

    Lovely to watch. Have you considered a work stand? Really takes the irritation out of maintenance and repairs.

    • @PangazShed
      @PangazShed  ปีที่แล้ว

      Yes, I missed out on a cheap used Parktool stand once! Thanks for watching

  • @gabeissaucywitit
    @gabeissaucywitit 7 หลายเดือนก่อน +1

    Great video dude and the bike looks sick! I'm probably going to do this mod myself but without the 11speed conversion on the back. Was just wondering how easy it was to do the conversion to 1x on the front and if you needed any weird tools. Or if you have any other tips it would be much appreciated.

    • @PangazShed
      @PangazShed  7 หลายเดือนก่อน +1

      Changing the front chainring should be straight forward. Normal tools to remove the front chain guide, crank arms etc. The chain might need to be changed to suit the teeth of the new single chainring (if it’s narrow-wide). If you want to change the crank assembly to something more exotic then you will need a bottom bracket tool to suit. But if sticking with simple taper bearing as I have then proceed! Cheers!

    • @mattnielsen7639
      @mattnielsen7639 6 หลายเดือนก่อน

      ​@@PangazShed I followed this and used the exact same stuff....it aint working wtf. The derailleur wont shift to the lowest 2 gears no matter I do and im frustrated

    • @sergior6249
      @sergior6249 5 หลายเดือนก่อน

      @@mattnielsen7639 Check your high limit screw on the derailer.

  • @CharlieLe-Wechner
    @CharlieLe-Wechner ปีที่แล้ว +1

    Did you have to change the wheel?

    • @PangazShed
      @PangazShed  ปีที่แล้ว +1

      No, the wheel and rear hub remained the same

    • @danl5632
      @danl5632 ปีที่แล้ว +1

      ​@@PangazShedIm planning to do the same. You mean its a direct bolt on. I dont need a new hub or wheel?

    • @PangazShed
      @PangazShed  ปีที่แล้ว

      I have successfully done this conversion with the original wheel and hub, so that’s correct, direct bolt on.

  • @Freeman-cb2zl
    @Freeman-cb2zl 11 หลายเดือนก่อน

    Love what you did with your Trek Marlin 5 going single chainring! Planning to do the same soon. Any issues with chain derailment since you switched? Would appreciate any insights!

    • @PangazShed
      @PangazShed  11 หลายเดือนก่อน +1

      Hi there! No issues with derailment! The only thing I had to do was retune it slightly to make sure all the shifting was spot on. I didn’t have it set up quite right once the vid was finished. Followed a tune walkthrough and it’s been perfect since.

    • @Freeman-cb2zl
      @Freeman-cb2zl 11 หลายเดือนก่อน

      ​@@PangazShed This is awesome! Great job also on choosing the optimal parts for the conversion, without the need to change the rear free hub and pedal bearings!

    • @PangazShed
      @PangazShed  11 หลายเดือนก่อน

      Yep budget friendly! When the OEM parts fail I’ll replace them with better. But hey, I might even replace them with OEM! I just like the ease of conversion. Thanks for checking out the vid. Cheers

  • @darylneo1832
    @darylneo1832 2 ปีที่แล้ว +2

    I got the marlin 5 with 2x8 drive train currently in the lowest gear is it a lot easier than the current lowest of 2x8?

    • @PangazShed
      @PangazShed  ปีที่แล้ว

      In theory yes, having more teeth on the cassette cog. Of course your application depends on what chainring too. Cheers!

  • @nickmorales3397
    @nickmorales3397 ปีที่แล้ว

    Is it possible to only upgrade to a clutch derailleur? I want to stop my chain from flying everywhere but don’t wanna replace everything.

    • @PangazShed
      @PangazShed  ปีที่แล้ว +1

      Pretty sure you’d new shifter to suit also

  • @ngalone8241
    @ngalone8241 ปีที่แล้ว +1

    Hello,bro I have the Trek Marlin 5 2022,I also want to change the 2by8 drive train to 1by 10 Shimano Deore.My question is should I have to change the rear free hub for higher teeth cassette or the 2022variant don't require any hub change to add 10-46T cassette? Please tell

    • @PangazShed
      @PangazShed  ปีที่แล้ว +2

      I didn’t have to change the hub, I believe if you go Shimano 1x12 then yes you would have to.

    • @ngalone8241
      @ngalone8241 ปีที่แล้ว

      @@PangazShed Can you suggest some basic 1by drivetrain upgrades which will not cost to change the hub

  • @adambokker1246
    @adambokker1246 8 หลายเดือนก่อน

    What size cassette tool did you use to take off the 7speed cassette. My is too big too fit.. do you have the tool spec?

    • @PangazShed
      @PangazShed  8 หลายเดือนก่อน

      I don’t have the tool spec, it was just a generic cheap one from eBay (comes in a 5 or 6 pce kit). It’s got 12 splines if that helps.

  • @aznpanther98
    @aznpanther98 7 หลายเดือนก่อน

    Did you have any issue with noisy derailure when shifted to the highest gear? I think i got everything to your setup and just did mine and angle of the chainring to the largest gear is pretty big angle, is it normal to have it noisy?

    • @PangazShed
      @PangazShed  7 หลายเดือนก่อน

      I don’t have any unusually loud noises that are of concern, I did spend a lot of time trying to get the tuning spot on though.

  • @Ljf2000
    @Ljf2000 ปีที่แล้ว

    Is it possible to put mechanical breaks on here

  • @mattnielsen7639
    @mattnielsen7639 6 หลายเดือนก่อน

    I followed this and used the exact same stuff....it aint working wtf. The derailleur wont shift to the lowest 2 gears no matter I do and im frustrated 😑

    • @lazarofernandez3663
      @lazarofernandez3663 3 หลายเดือนก่อน

      Did you figure out the problem?

    • @mattnielsen7639
      @mattnielsen7639 2 หลายเดือนก่อน

      @@lazarofernandez3663 Yes It was limit screws and tension. I started too tight. Backed it way off lengthened the cable and then slowly worked it from there and eventually got if.

  • @tomacheteful
    @tomacheteful 2 ปีที่แล้ว +1

    Hello and thank you so much! Which raceface chain ring did you use? 30T?

    • @PangazShed
      @PangazShed  2 ปีที่แล้ว +1

      Yes, 30T. Thanks for looking, cheers

    • @tomacheteful
      @tomacheteful 2 ปีที่แล้ว +1

      One more question.. will the xt m8000 derailleur work with the slx m7000 cassette? Im having a hard time getting the m7000 derailleur quickly.

    • @PangazShed
      @PangazShed  2 ปีที่แล้ว +1

      By the look of it, the m8000 is also an 11speed rear derailleur so yeah should work! The m7000 might be low on stock as it’s perhaps becoming discontinued? Not entirely sure, sorry. I only bought the m7000 because it was cheaper haha

    • @tomacheteful
      @tomacheteful 2 ปีที่แล้ว

      Hey Im working on this chainring and the original shimano bolts seem to be a tad too long for the single raceface chainring. Did you use different bolts or am i missing something lol

    • @PangazShed
      @PangazShed  2 ปีที่แล้ว +1

      I used the bolts that came with the crankset that I bought, I didn’t have an issue

  • @phazon4
    @phazon4 ปีที่แล้ว

    Did you have to replace the rear hub when upgrading the cassette ?

    • @PangazShed
      @PangazShed  ปีที่แล้ว +2

      Not with the selection of parts I’ve used here

  • @runtz61
    @runtz61 9 หลายเดือนก่อน

    is the shifting smoother and better than the old altus shifter ? Ive had mine for about 2 weeks and want to upgrade but i really like the altus shifter .

    • @PangazShed
      @PangazShed  9 หลายเดือนก่อน

      I’m loving the combination of parts. It’s smooth and less clunky than the original 2x system

  • @josephsowinski6960
    @josephsowinski6960 ปีที่แล้ว

    If crank set off Amazon

  • @fransandtory
    @fransandtory 2 หลายเดือนก่อน

    What is the total cost of this upgrade?

    • @PangazShed
      @PangazShed  2 หลายเดือนก่อน

      Around mid $300’s at the time. Bought during online sales

  • @xm7mdddx
    @xm7mdddx 2 ปีที่แล้ว

    doesn't the rear hub only support up to 10 speed Cassette?

    • @PangazShed
      @PangazShed  2 ปีที่แล้ว +4

      This particular 11sp cassette is compatible with the 8/9/10 Shimano freehub. Same spline and don’t need a longer one. It’s the 7 speed and down that the hub needs to be changed. I made sure of this before I bought everything. Thanks

    • @isivaldivia8463
      @isivaldivia8463 ปีที่แล้ว

      @@PangazShed Is it the Shimano FH-RM35??

    • @brozdowskiracing8777
      @brozdowskiracing8777 3 หลายเดือนก่อน

      @@PangazShedI ordered all the same exact parts. Have a 2020 Marlin 5 the cassette only fits 10 of the 11 gears on rear hub. Idk what the issue is. Do you have any suggestions?

  • @k-kgeri8085
    @k-kgeri8085 4 หลายเดือนก่อน

    How much did this upgrade cost?

    • @PangazShed
      @PangazShed  4 หลายเดือนก่อน +1

      About mid 300’s. I bought during an online sale

  • @adelaideinvigilation5230
    @adelaideinvigilation5230 2 ปีที่แล้ว +1

    Enjoy

  • @marlin_roby_5
    @marlin_roby_5 7 หลายเดือนก่อน

    Can i change a 2x8 to a 1x8??

    • @PangazShed
      @PangazShed  7 หลายเดือนก่อน

      Yes would be a straight forward mod

  • @nonzpkff1671
    @nonzpkff1671 ปีที่แล้ว

    Do I need to change the hub for 1x11 or 1x10

    • @PangazShed
      @PangazShed  ปีที่แล้ว

      No hub change required

  • @asmrlogic9412
    @asmrlogic9412 ปีที่แล้ว

    Is this the Gen 2 Marlin?

    • @PangazShed
      @PangazShed  ปีที่แล้ว

      I purchased this in the end 2021 as the new 2022 model, so it’s gen 1

  • @Sāxōn.Hinċks
    @Sāxōn.Hinċks ปีที่แล้ว

    How much was that all together

    • @PangazShed
      @PangazShed  ปีที่แล้ว

      On sale was about $350aud if I recall

  • @Vlad-in8ne
    @Vlad-in8ne 2 ปีที่แล้ว

    Love your work mate! I have the same bike 2022 marlin 5 same color as well. I really love to upgrade to 1x.. can you please send me all the parts you used for this , prices and where did you buy it? Thanks heaps..

    • @PangazShed
      @PangazShed  2 ปีที่แล้ว

      Cheers! 1x is so much nicer! I have listed all the parts in the description, I bought all my parts online as I found availability and stock levels of local shops a bit hit and miss.

    • @Vlad-in8ne
      @Vlad-in8ne 2 ปีที่แล้ว

      Cool! Thanks mate

    • @eyefishinggunkchannel1011
      @eyefishinggunkchannel1011 2 ปีที่แล้ว

      ye i have the same bike 2021 1 though basifly the same but i want the 1x even the 7 on the back is fine i dont wanna upgrqde anything els so i also need a list cos thr list this guy has i dont no what is for the 1x or for other upgrades i think itsjust the shimano budget box am i rite plz cos my local nlbike dhop bloody 20 miles away said it can jot be done

  • @noneya533
    @noneya533 2 ปีที่แล้ว

    Any other chainring options for this particular Marlin 5?

    • @PangazShed
      @PangazShed  2 ปีที่แล้ว +2

      Yep, 104BCD is the bolt pattern needed if you use the arms I did. Although if you want to use completely different crank arms you can with whatever sealed bearing bottom bracket you like. Heaps of options.

  • @anthonycordero5050
    @anthonycordero5050 11 หลายเดือนก่อน

    Now your mountain bike is a real mtb

    • @PangazShed
      @PangazShed  11 หลายเดือนก่อน

      Except the “shocks”

  • @CX_D
    @CX_D ปีที่แล้ว +1

    461 dollars ZAMMM🤑🤑🤑🤑🤑🤑🤑🤑

  • @weslee6637
    @weslee6637 ปีที่แล้ว +1

    Wouldn't it have been better to just get a marlin 6??

    • @matuskulisek5429
      @matuskulisek5429 ปีที่แล้ว +3

      His components are better then on marlin 6

    • @viccc903
      @viccc903 ปีที่แล้ว

      @@matuskulisek5429what perks do you get when upgrading these parts ?

    • @PangazShed
      @PangazShed  ปีที่แล้ว +1

      For me: cleaner aesthetic, light weight, less moving parts, better & easier gear selection and in the case of the pedals, better grip. More importantly: personalization 👍🏻

  • @eamytb
    @eamytb 10 หลายเดือนก่อน

    That hand is very annoying