Thanks for the update on the Ol' WHITE clutch replacement. Oh the joys & aggravations of equipment maintenance. 😁 Hope you're able to get a few winks of sleep in between all of the things you guys have going on there. 👍🏻👍🏻🍻🍻🍻🍻
That blue tin can you have as a cover made me chuckle. My 2-105 has had a tomato soup can since long before I got it and I saw my neighbour’s white uses a rag with a hose clamp.
How's a guy gonna find out how a thing works if he doesn't take it apart 🤔😃 glad to see Billy keepin the radiator warm 😂 hope all goin well wi the calvin 👍👍
You can take the engine out without the power shift making sure the power shift doesn’t pull out cause there’s an oring there pull the fitting out of the power steering box on top cause you’ll break it off when you pull the engine.. I’ve taken the front ac and oil cooler out just to have more room when pulling the engine
I've always pulled the 3 speed with the engine, although I've heard of guys doing it the way you are. Youu need to support the 3 speed somehow, because the rear coupler is a floating one, it just slides in and out, not enough support to hold up the weight of the unit. They had everything tucked in tight on that model, it can be a pain to get it all apart.
Well we got er out. You are right it's a pain. But I found it easier to take it all out together. There was no way I could get it back far enough to just take the engine. Thanks buddy
@@straightpipeacres6365 last one I did i had to loosen the cab mounts and jack it up a little to get the tank out. Pain in the rear, but it sure makes the rest go easier.
Comment #47, like #222.kind of a pain in the ass ,the amount of shit you have to remove to do a clutch. Lucky you have lots of spare time! Lol!!! Great channel,great videos.
Heh go check out "that Oliver guy" his name is Chris Lousey I think. Some of his videos would help you. The least on I took apart with the hydropower with it.
I thought pulling that shaft would be like taking the tonsils out of a calf before it dropped from the cow! Lol I had one of those tanks split in the bottom. I had good luck with two coats of Flex Seal spray. It's been holding for 3 years, (Knock on wood ). Doc
Hydropower comes put wit the motor when yo get it on the floor then you remove it. You'll also need a clutch alignment tool , I got one, you could borrow but I'll need it returned, You may want to do the water pump as well it will be easy to get at. What year is it mine is a 74
What the hell go to town and get cat food LOL, ain't no mice or rats around there for them cats to catch 👍 🍺 🍺 🍺 doing a hell of a job there straight pipe 👍🍻🍻🍻 🇨🇦
Losey is a good guy to talk to he knows his stuff on white tractors. I love these repair videos. Have a good one
Thanks
Nicks on Part 8 tonight on the 5020. It's good to get to know your tractor, you can do it!!
Oh gosh yes!!
Lol
Thanks for the update on the Ol' WHITE clutch replacement. Oh the joys & aggravations of equipment maintenance. 😁 Hope you're able to get a few winks of sleep in between all of the things you guys have going on there. 👍🏻👍🏻🍻🍻🍻🍻
You bet Ron. Not a whole lot of sleep but we are getting er done a couple hours at a time hahahah
Congrats on the 6K buddy, nice work on the White.
Thanks
That blue tin can you have as a cover made me chuckle. My 2-105 has had a tomato soup can since long before I got it and I saw my neighbour’s white uses a rag with a hose clamp.
Lmao. It was on there when I bought it too hahah
A farmer must be everything from computer technicians
to landscape architects and everything in between.
Hahaha pretty well sums it up
@@straightpipeacres6365 Jeupp.
Good video Ryan like the details. Congratulations on making it to 6000 that’s great!
Thank you sir
Always fun splitting tractors....
You should get ivsn to come give you a hand👍😎
Hahaha 👌
The first time is always the toughest. Once you've done it once then it becomes EASY. Keep up the hard work Sir, you're doing good so far.
Thanks
Dam it Ryan, I forgot to congratulate you on the 6k+ subs!
CONGRATULATIONS!
Doc
Thanks buddy
White Tractors are worth the time and effort to keep running . Grew up around John Deere and White tractors .
Agreed
How's a guy gonna find out how a thing works if he doesn't take it apart 🤔😃 glad to see Billy keepin the radiator warm 😂 hope all goin well wi the calvin 👍👍
Lol thats right
How are ya now Iam fucking late love your channel Buddy been cutting trees and fixing fence all day now Iam 🍻🍻🍻🍻
Hahahah thanks
An also congrats on 6k subs u deserve them 💪💪
Thanks buddy
You can take the engine out without the power shift making sure the power shift doesn’t pull out cause there’s an oring there pull the fitting out of the power steering box on top cause you’ll break it off when you pull the engine.. I’ve taken the front ac and oil cooler out just to have more room when pulling the engine
Thanks
awesome Vidjah
Thanks
G'day Baby shark great video mate
Thanks buddy
6000 subs is worth a cheer or two.
It is good to hear.
Thank you my friend
Congratulations on 6000🎉🎂🍿🍨🍻🍻 👍
Thanks bud
No rest at calving time for a good herdsman (and his wife). Admire your efforts.
Thank you sir
Been waiting to see the bastard in action, always wanted one of these tractors
👍
I've always pulled the 3 speed with the engine, although I've heard of guys doing it the way you are. Youu need to support the 3 speed somehow, because the rear coupler is a floating one, it just slides in and out, not enough support to hold up the weight of the unit. They had everything tucked in tight on that model, it can be a pain to get it all apart.
Well we got er out. You are right it's a pain. But I found it easier to take it all out together. There was no way I could get it back far enough to just take the engine. Thanks buddy
Looking forward to the next installment!
👍🍻 it's alot of parts to remove hey. I think the fuel tank removal was the worst so far hahahaha
@@straightpipeacres6365 last one I did i had to loosen the cab mounts and jack it up a little to get the tank out. Pain in the rear, but it sure makes the rest go easier.
@@ThatOliverGuyChris that's exact what I did too
Comment #47, like #222.kind of a pain in the ass ,the amount of shit you have to remove to do a clutch. Lucky you have lots of spare time! Lol!!! Great channel,great videos.
Hahahaha ya sure lol
Great video
Thanks
We had a 105 and I pulled a Wight combine behind it when I was around 13 years old .we sold in are farm action at cutkife SK in 79 or 80
Hahaha cool
Heh go check out "that Oliver guy" his name is Chris Lousey I think. Some of his videos would help you. The least on I took apart with the hydropower with it.
Already watch him lol
Wwll now your going to be the next Oliver guy lol👍👌
Hahaha
At least there green haha
I thought pulling that shaft would be like taking the tonsils out of a calf before it dropped from the cow! Lol
I had one of those tanks split in the bottom. I had good luck with two coats of Flex Seal spray. It's been holding for 3 years, (Knock on wood ).
Doc
Lol 👌🍻🍻
I fly by the seat and pants all the time good vida buddy
Hahaha 👌
Party time 6000 plus😁😁😁
Lol 🍻🍻🍻
Welllllll....you are doing everything I would do so far lol. I've talked to a couple guys that just lift the tank and such. Take care
I had to take the tank right out. What a pain
@@straightpipeacres6365 oh that would suck
Stright Pipe you have to train Billy to be a mecanik so he can do the shopwork for you
Lol that would be nice
Great video as usual. How is your bale wind brake working ?
Thanks. Haven't used it yet
Hydropower comes put wit the motor when yo get it on the floor then you remove it. You'll also need a clutch alignment tool , I got one, you could borrow but I'll need it returned, You may want to do the water pump as well it will be easy to get at. What year is it mine is a 74
I'm pretty sure ours is a 78
Try using the outside pulleys on the crank and the fan, It will straiten out the belts. You have them on the inside.
Ya I never noticed that they were like that till the other day
Is a 1070 restoration next? Good n u?
Hahaha fuck no lol
6000 subs. Nice!
Thanks
How many cats you running at the minute Ryan??🤔😂🤣🐈👏
Just a D9 buddy
@@straightpipeacres6365 one's with fur on I meant lol🤣
@@andrewwoodhead8305 hahaha I know lol.
@@andrewwoodhead8305 I think there is 7 or something. Haven't seen a live mouse in over a year anyway
@@straightpipeacres6365 top them up with cat food is what we do.ours had big rat last week!!🐈👌👍🐀
I am subscribed here is your 👍 and comment all in one lol.
You know I had to do do it lol.
Hahahaha right
🇨🇦👌Hey bois!
👌🍻
Damn buddy not much you can'r do id there lol? Hope calving is going ok. Been awhile you take care Ryan.
thanks tom. you too buddy
What the hell go to town and get cat food LOL, ain't no mice or rats around there for them cats to catch 👍 🍺 🍺 🍺 doing a hell of a job there straight pipe 👍🍻🍻🍻 🇨🇦
Thanks buddy
You gonna start work on John Deere tractors now too?
Anything is possible
]👍👍
nice
Is this the one that has the rod knock or do you have 2 of them or more lol
No this is a good one lol
🥇
The shaft has to be out far enough that it’s out of the hydro power
It was out 3ft
I pulled mtr on a 2- 155 bout 20 years ago and dont remember pulling power shift out to get mtr out
🤷♂️ she won't go the sum bitch
Did you talk nice to it 😊
Never seen a cat that wanted to be on video that bad.
Lol damn billy
Good n u
not'sa bad
Not sa bad
I knew it the cat do help you :)
Lol
Silver medal 🥈
Nice budz
@@straightpipeacres6365 Friggin EH 👍
Weld a piece of rod on a bolt for a puller
For what?
@@straightpipeacres6365 well you said that reddyrod may not be long enough
@@joeysharp7786 oh ya it was good
U got a cowcam? If u want one we got one fore sale.
Is it wireless
@@straightpipeacres6365 it sure is. Like the camera goes to a box with an intena then its wireless.
@@pistonringfarms8107 ok how much
@@pistonringfarms8107 and can it turn 360°
@@straightpipeacres6365 yup.
A comment👌
All just to change a clutch lol faaaaaack
Oh it's lost o fun
5020 vs white
I like 5020 better 😂
Lol