ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How To Make Pie Cuts | Quick & Easy Method - Stainless Steel Pie Cuts For Exhaust Fabrication
ฝัง
- เผยแพร่เมื่อ 31 ส.ค. 2021
- Adam walks through a simple solution to making pie cuts for your fabrication projects!
www.fabco.uk
:::::::::::::::::::::::::::::::::::::::
PIE CUT CALCULATOR
bit.ly/piecutc...
Finally someone explaining it nice and simple thank you sir 👌🏻👌🏻👌🏻
Nice and easy to follow! Nice work!
Thanks Kieran!
Awesome video, easy to follow, I used a finger linisher to clean my inside burr
Easy, simple guide! Thanks!
Notice how he changed from imperial to metric to achieve better precision.
I’ve made a few pies but still learnt more of that vid ace
Glad it helped. Thanks for watching!
Sweet! Just exactly what I was looking for!!!
You can use a length of angle iron to mark a straight line down a tube. Just lay the open side of the angle along the tube. It self centres because it sits on the 2 outer edges of the angle. Then align the edge of the angle with your centre line from using the tape.
Yeah that works well, assuming you have a good straight piece of angle kicking about that’s not been used as a pry bar!🤣
He mentioned that in the video if you watch it
I love it
Best vid on this by far
first straight to it.
Anyone know what kind of bandsaw he's using?
Baileigh BS-210
Using a square assumes that your end cut is square. Angle iron works better for this.
dont you want to keep that first piece, as a transition from straight tube to pie cuts?
Very easy work like that, when you have tools. I wanna see, how do that, if you have only angle grinder.
Easier way to get the center line is use a piece of material that puts the sharpie at exactly 1/2 of the width of the pipe and just move all along the pipe.
Ok, i have the sharpie and masking tape...now i just need the $10,000 bandsaw :)
Is the icengineworks for sale yet?
Very soon, just sorting out the last few bits of paperwork!
@@FabCoUK happy days dude
Out of stock already
Gutted
@@BobbyBrown11 Plenty of pie cuts in stock. : )
some would say its as easy as pie.
Ill see myself out.
Yeah... quick and easy if you have an expensive bandsaw that can be set to any precise angle 🤦
I’m doing basically the same thing with a $50 portaband used in the harbor freight $100 stand (that I got on sale for 25% off). That’s a lame excuse.
Or just use a rotary cut off wheel
Or a hacksaw
Chop saw works too it just eats more material unless you have a special metal blade
cały film jak cuąć rure a na konieć ita kchj z tego
At 0:54 he waves to Joe Biden.
TOO MUCH WORK.. GONNA BUY A MACHINE THAT DOES ALL THAT FOR ME..
Too much math 🙉