1970 NOVA IGNITION CYL INSTALL AND REMOVAL

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ส.ค. 2024
  • removing the ignition cylinder on a GM steering column this is a 1970 CHEVROLET NOVA
    #chevrolet #chevroletnova
    #bigblockchevrolet

ความคิดเห็น • 41

  • @pylmanryan3900
    @pylmanryan3900 ปีที่แล้ว +1

    Extremely helpful thanks..1970 Impala..here

    • @GAMALA194
      @GAMALA194  ปีที่แล้ว

      Thank you for watching this video

  • @sparlin88
    @sparlin88 5 ปีที่แล้ว +1

    Thanks so much . I just changed my ignition in my 69 El Camino. So much better now . I was also putting on a new Grant steering wheel and wanting to make the horn work. After watching your video here I see mine is missing horn parts so will need to take it apart again. But now I know how. Thanks

    • @GAMALA194
      @GAMALA194  5 ปีที่แล้ว

      THANK YOU FOR WATCHING

    • @JesusGarcia98.F
      @JesusGarcia98.F ปีที่แล้ว

      Hey brother, I got a 1970, you didn’t have to program the new cylinder lock right?

    • @sparlin88
      @sparlin88 ปีที่แล้ว

      @@JesusGarcia98.F I sure didn't have to .

    • @JesusGarcia98.F
      @JesusGarcia98.F ปีที่แล้ว

      @@sparlin88 yeah I figured it out I need a new sector gear

  • @juanrodriguez9565
    @juanrodriguez9565 3 ปีที่แล้ว +1

    Yea thanks for showing us how to get it done really appreciate the help

    • @GAMALA194
      @GAMALA194  2 ปีที่แล้ว

      Thank you so much for watching this video I appreciate you

  • @MHTownsend57
    @MHTownsend57 3 ปีที่แล้ว +1

    This was so helpful, thank you so much. I am going to attempt this now due to your video. Thank you and yes it helps a ton.

    • @GAMALA194
      @GAMALA194  3 ปีที่แล้ว

      Thank you so much for watching i haven't posted much content lately I have allot of videos to edit thanks again. If you can please subscribe to my channel I will really appreciate it

  • @powerlinemodelcarsandhands524
    @powerlinemodelcarsandhands524 5 ปีที่แล้ว +1

    thanks man the video did help me out just realizing I didn't have the locking plate and the 3 screw cover I have a 75 impala

    • @GAMALA194
      @GAMALA194  2 ปีที่แล้ว

      Thank you so much for watching this video I appreciate you

  • @drunkn4769
    @drunkn4769 5 ปีที่แล้ว +1

    now this is a good video. way better than that fool who drilled through his plate
    thanks man
    nice car

    • @GAMALA194
      @GAMALA194  5 ปีที่แล้ว

      thank you for watching

    • @theshark2804
      @theshark2804 5 ปีที่แล้ว

      @@GAMALA194 my issue is that my shifter wont move and the key wont turn. The shifter is not connected to the transmission. What should i be looking at to get this fix

  • @superstarmj1
    @superstarmj1 2 ปีที่แล้ว +1

    Thanks very much

    • @GAMALA194
      @GAMALA194  2 ปีที่แล้ว

      Thanks for watching this video I appreciate you

  • @newbeetle5413
    @newbeetle5413 5 ปีที่แล้ว +1

    Good video btw nice Nova and it's a manual
    makes it better

    • @GAMALA194
      @GAMALA194  5 ปีที่แล้ว

      thanks for watching

  • @JseMagana
    @JseMagana 4 ปีที่แล้ว +1

    Can you post a video of how you installed that steering wheel?

  • @cuelab
    @cuelab 5 ปีที่แล้ว +1

    Cool video. I was hoping to see you replace the horn contacts and center cap, as I just purchased this same unit, but have realized that the standard Grant adaptor kit does not work with these low profile caps... I cant find any videos on youtube installing this horn either. Cheers

    • @GAMALA194
      @GAMALA194  5 ปีที่แล้ว

      i will up load a video on it, these after market horn contacts are really weak

    • @cuelab
      @cuelab 5 ปีที่แล้ว

      That would be fantastic! Thanks @@GAMALA194

    • @theshark2804
      @theshark2804 5 ปีที่แล้ว

      My issue is that my shaft is not seated. What do I need to do to fit this. I’m thinking replace both bearings

  • @jacksongin831
    @jacksongin831 4 ปีที่แล้ว

    Hey this has helped me a lot but the gear piece or acutator is broken how would you change that so ignition cylinder can turn over

  • @Kato1559
    @Kato1559 4 ปีที่แล้ว

    How do you remove the sector gear that the cylinder comes in contact with

  • @MHTownsend57
    @MHTownsend57 2 ปีที่แล้ว +1

    I got a brand new key cylinder for the 70 Nova and all of the sudden when I go to turn off the car, it stays running. I have to figit with the key and press in really hard and then turn off to get the ignition to go off. What would be the problem here?

    • @GAMALA194
      @GAMALA194  2 ปีที่แล้ว

      Check the lever that pushes the switch or the spring on the switch is sticking. Thanks for watching this video I appreciate you

    • @MHTownsend57
      @MHTownsend57 2 ปีที่แล้ว +1

      @@GAMALA194 What do you mean by lever? Do you have a Facebook and messenger I might be able to contact you and go through this?

    • @GAMALA194
      @GAMALA194  2 ปีที่แล้ว

      @@MHTownsend57 javier gamala

  • @MrCubanski
    @MrCubanski 5 ปีที่แล้ว +1

    what is the tool called?

    • @GAMALA194
      @GAMALA194  5 ปีที่แล้ว

      thanks for watching this is the way you can find it on ebay "Steering Wheel Lock Plate Removal Tool"

    • @MrCubanski
      @MrCubanski 5 ปีที่แล้ว +1

      @@GAMALA194 Thank you brother. Can you also make a video on how to change a distributor from points to HEI? I have a 1970 chevy nova I6 just got it and needs a lot of work. thank you in advance

  • @davidrossmiller8349
    @davidrossmiller8349 4 ปีที่แล้ว +1

    You have the key why would you take it a part in 5 min you could have replaced it with a paper clip

    • @GAMALA194
      @GAMALA194  4 ปีที่แล้ว

      Paper clip? Can you please post a video of how you do it in 5 minutes with your paper clip? Thank you

    • @davidrossmiller8349
      @davidrossmiller8349 4 ปีที่แล้ว

      @@GAMALA194 I'm slamed with work but this may help. Some have 2 button holes also but this guy showes the crosses AS LONG AS YOU HAVE YOUR KEY.
      th-cam.com/video/LqgRxxU-0OA/w-d-xo.html

    • @GAMALA194
      @GAMALA194  4 ปีที่แล้ว +1

      @@davidrossmiller8349 that's a totally different system and not the same on a GM CAR OR TRUCK WITH THE IGNITION CYL ON THE STEERING COLUMN. but thanks for watching my videos.

    • @davidrossmiller8349
      @davidrossmiller8349 4 ปีที่แล้ว

      @@GAMALA194 ahhh got you. Good video anyway

  • @zero86if
    @zero86if 3 ปีที่แล้ว

    Where did u get the Steering wheel

    • @GAMALA194
      @GAMALA194  3 ปีที่แล้ว

      I got it at Pomona swap meet. Classic industries sells them also