How to change Distributor cap and rotor arm on a K11 Nissan Micra
ฝัง
- เผยแพร่เมื่อ 24 พ.ย. 2024
- It looked like my K11 Nissan Micra was still running on the original Ignition system and with it being over 20 years old i thought it's probably time i changed some of the parts before they fail.
The engine is a CG13DE but it will be the same for a CG10DE.
So i changed the Distributor cap and rotor arm, i also plan on upgrading the HT leads in the near future.
The parts were bought from Euro car parts, if you just give them a call and give them your registration they will get the parts for you.
Anyway here's a detailed video of how i did it.
If you found the video useful then please hit the like button and subscribe to the channel for more K11 Micra content.
Help support the channel by purchasing an item from our store: www.leadfoottv...
Hopefully you guys found this helpful, if you did then please hit the like button and subscribe to the channel.
I promise my normal modification videos will return soon.
K11 when it warms up starts cutting out any ideas what it could be
@@Momo2k121 maybe the internal circuit...It seems not available separately, so better to look around for a spiare distributor
Interesting video...do you know if the inner and outer distributor oil seals are available at Nissan dealers? Because my 1.0l is leaking a Little bit of oil around the distributor
My 1.3 1999 Micra £150 don't start. RAC came told to change distributor cap. Ordered eurocarparts will be fitting tomorrow. Thank you for the clear instructions. Subscribed and Liked :)
No problem, hope you get it sorted 😀
My micra wont start also. But already test, the plug is spark. But i think the spark is low because the light is orange not blue. Is there possibility that distributor also problem??
Helo thanks for the video do you show how to check for fuel an spark on these micras ?
Is there a way to check the ignition coil without removing the distributor ? Thanks,
Nice vid. I have micra from 2000 series. Cap is different then yours and i have problems finding the new one. Everytime i find a new cap it doesnt fit.
Hey did you find a cap that fit in the end?
Hi, didi you find a cap that fit, me too i have the same problem
@@shakey989 Hi, didi you find a cap that fit, me too i have the same problem
Hi mate. My micra wont start. But the plug imwas spark but the colour of spark is orange not blue. Is that possibility that the distributor also problem?
What engine strut bar you got mate :) ??
It's a Gizfab brace, i have the full handling package which includes all the braces and adjustable panhard bar.
I'd highly recommend it.
www.gizfab.com
Ive changed the distributor cap and the spark plugs my car isnt even turning over? Any help
Injector?
Hi my k11 1.0 litre
When it warms up it starts cutting out any idea what to check I've check the leads already
Sounds like the coil. Try getting a distributor from the scrap yard and giving that a try.
It's a common problem with these internal coil distributors, used to get it quite a lot with my Hondas as they have a similar setup
Those aftermarket wings dont work its need original part. 3 aftermarket wings tested and doesnt work 😃 orginal whit nissan store and working