I've watched a few of your videos regarding the Nissan Micra as we have just recently got one. Your attention to detail is superb. I'm truly impressed that absolutely every little bit of disassembly and reassembly is covered with text information too. Even bolt sizes and part numbers. Just brilliant. Thank you.
The video assisted me very much.I own nissan micra/march k13 2013.it started with engine light staying on.I changed one of ignition coil and spark plug which were burnt.The light dissapeared and acceleration and power improved
Thanks a lot for your videos mate i have just bought a Nissan micra k12 watching your videos im doing service the car on my own i appreciate your help 🙏🏻
Good day I have a k12 about 3 month and your videos are so very helpful for me servicing the vehicle and I thank you for your time and effort. Question, what's the part number for the coil packs please. Thanks again.
Thank you again. Why did Nissan designed the air cleaner assembly to cover the engine? Long are the days we can see the engine when we open the bonnet!
hi ive got the same 1.2 but under light accerlation it starts to make a chatter noise @ low rpm but under heavy accerlation its fine just not as strong. also no check engine light on
Hey i have a 2002 one and having problems with it starting. It starts sometimes and runs okay then others it winds up but doesnt start and is having problems with cutting out. My dad thinks it may be a relay
hello, can you please answer, I have a long start on a nissan micra 12 petrol, what could it be, it starts very hard, I changed the engine starter and it still starts hard, thank you
scanner detected code is not trustable??? simply replace bad with good. remove connectors and bolts, then replace the coil, install again connectors and nuts, then again remove connectors and bolts, put the good coil in cylinder 4, finally put the connectors and bolts back
Can you please help me. I have a 2003 micra k12 with the same problem but on cylinder 3. I have change the Ignition coil on the cylinder 3 but when i start the engine again the car still work exactly like before. The engine shaking. What have i doing wrong. I have change the sparkplug and the Ignition coil but still the engine is working bad. Please help me.
@@screwsnutsandbolts Yes, my diagnosis showed that cylinder 3 has misfires. And i have change the Ignition coil on and the sparkplug but still the engine work like before
There could be a problem with the injector or some other issue. Check this link: www.breakerlink.com/blog/maintenance/engine-misfires-the-main-causes-and-the-symptoms-of-misfiring-you-must-not-ignore/
Hi there , i have got a problem with the car engine I tried to change all the sensor ( crank sensor, cam sensor, oxygen sensor and the maf sensor) the engine can run for 1 to 2 minutes than stop itself. I try everything but no solution My car is an nissan micra 2004 please help me!
@@screwsnutsandbolts yes the engine warning it shows on the dashboard I'm really struggling to fix this issue And the engine keep swinging when I try to start it
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
I've watched a few of your videos regarding the Nissan Micra as we have just recently got one. Your attention to detail is superb. I'm truly impressed that absolutely every little bit of disassembly and reassembly is covered with text information too. Even bolt sizes and part numbers. Just brilliant. Thank you.
Thank you very much !
The video assisted me very much.I own nissan micra/march k13 2013.it started with engine light staying on.I changed one of ignition coil and spark plug which were burnt.The light dissapeared and acceleration and power improved
Thanks for watching !
Thanks a lot for your videos mate i have just bought a Nissan micra k12 watching your videos im doing service the car on my own i appreciate your help 🙏🏻
You're welcome, thanks for watching !
Excellent - I should have watched this a few days ago before my trip to the garage .
Thanks !
Good day
I have a k12 about 3 month and your videos are so very helpful for me servicing the vehicle and I thank you for your time and effort.
Question, what's the part number for the coil packs please.
Thanks again.
You're welcome. The part number is NISSAN 22448-AX001
@@screwsnutsandbolts thanks alot 🙏🏾
Good diagnising and repecing coil. I like this vidio.
Thank you very much!
Thank you again.
Why did Nissan designed the air cleaner assembly to cover the engine?
Long are the days we can see the engine when we open the bonnet!
Yeah the K11 was so much easier. Progress eh.....lol
Excellent contents. Thank you.
You're welcome, thanks for watching !
Thanks a lot.
You're welcome !
thank you
You're welcome
Can i do a coilover guide for the micra? Want to replace mine as the rubber inside is ripped. Or cv boot as well
Nice video brother
Thank you !
hi ive got the same 1.2 but under light accerlation it starts to make a chatter noise @ low rpm but under heavy accerlation its fine just not as strong. also no check engine light on
Is the noise definitely coming from the engine ?
Thanks
You're welcome
I have a Nissan March but the problem is that it is burn or damage coils once it starts, what could be the problem?
Hey i have a 2002 one and having problems with it starting. It starts sometimes and runs okay then others it winds up but doesnt start and is having problems with cutting out. My dad thinks it may be a relay
That could be a lot of different things. You'll probably have to have a mechanic take a look at it and diagnose the problem.
hello, can you please answer, I have a long start on a nissan micra 12 petrol, what could it be, it starts very hard, I changed the engine starter and it still starts hard, thank you
Anybody found a cheap obd scanner that works on k12 the one in the description is no longer available.
Hi. My 2003 micra engine won't start no spark. RAC couldn't find fault and towed to garage. Do you think it could be crank sensor?
That's one possibility
@@screwsnutsandbolts It was the cam sensor. Thanks
Got a p0300 code on mine at the moment, it’s 2010 year. What could be the cause of this code? Resistance on all the coil packs are1.7ohms
It could be faulty spark plugs, a faulty sensor or something else. You'll probably have to have a mechanic diagnose the issue
scanner detected code is not trustable??? simply replace bad with good. remove connectors and bolts, then replace the coil, install again connectors and nuts, then again remove connectors and bolts, put the good coil in cylinder 4, finally put the connectors and bolts back
Can you please help me.
I have a 2003 micra k12 with the same problem but on
cylinder 3. I have change the Ignition coil on the cylinder 3 but when i start the engine again the car still work exactly like before. The engine shaking. What have i doing wrong. I have change the sparkplug and the Ignition coil but still the engine is working bad.
Please help me.
Did you confirm that the problem is with cylinder 3 ?
@@screwsnutsandbolts Yes, my diagnosis showed that cylinder 3 has misfires. And i have change the Ignition coil on and the sparkplug but still the engine work like before
There could be a problem with the injector or some other issue. Check this link: www.breakerlink.com/blog/maintenance/engine-misfires-the-main-causes-and-the-symptoms-of-misfiring-you-must-not-ignore/
@@screwsnutsandboltsThank you for the help i appreciate it
What size bolts are they
They're all 10mm bolts
Hi there , i have got a problem with the car engine
I tried to change all the sensor ( crank sensor, cam sensor, oxygen sensor and the maf sensor) the engine can run for 1 to 2 minutes than stop itself.
I try everything but no solution
My car is an nissan micra 2004 please help me!
That could be a number of issues. Are you getting an engine warning light on the dash ?
@@screwsnutsandbolts yes the engine warning it shows on the dashboard
I'm really struggling to fix this issue
And the engine keep swinging when I try to start it
All symptoms no codes frustrations micra k11. 2004. Petrol
Coll