I've followed just about all of your builds and admire your attitude and skills. This one really hit home - it made me pull my almost-done Honda CMX 450 powered project out of the equipment shed. My wife put it into storage 5 years ago right after I broke my leg, and half the farm eventually got stacked on top of it.. I'm pushing 72 and figured it's get it done or sell it before either it or me rots away. Fortunately I had shut the petcock off on its last start up. All I did was replace the battery, clean the tank, and ran some fresh ethanol-free gas with a squirt of techron thru the carb - didn't even take it apart. Started and ran like it was last shut off yesterday. Forgot how loud it is thru 36" curved straight pipes with megaphone ends - neighbor a half mile away came over to investigate. I finished the clutch (bent the bike's clutch lever and mounted it as a foot pedal ) and fabricated the same kind of left-side jockey shifter. Took it for first ride with the right side tire in free-wheel. Light throttle, feathered the clutch, rolled out nice and quick, then nailed the throttle and it all but stopped moving - left rear tire just went up in smoke. Waiting on new set of Ebay tires all around. Once this one is done, I have an early Honda Pilot with a 2 stroke 398cc Kaw jet ski engine that 's nearly finished - just needs a better brake and a steering rack from GPS. Hope you guys are around for a long time to come.
I remember when it was just a pre cut coffin looking for a level spot to be welded.. man that thing turned out so freaking badazz.. never doubted you guys for a moment.. I’ll say it again that is the nicest and sweetest machine y’all have built to date..
Awesome build guys! Please, don't forget to prioritize installing a firewall before further testing as I know how easy it is to be carried away and get exposed to an accident. Safety first! Keep the awesome content coming! Have fun!
When I did my cart…I did it with a CB360 motor…fuel pump…hand shifter (half of handle bar with clutch lever) homemade live axle with 3wheeler tires and a sprocket the size of the wheel!!! Lone disk from the front of the bike! Thing was sick!!!
@@retrox684 You could easily make an aluminum wing that weighs all of a couple pounds and bolt it to that suspension brace in the rear. Since it wouldn't matter aerodynamicly till over 60 mph really in any meaningful way, it would be fine. Just don't make the wing out of steel and the balance won't be any worse than now. They could also do a front F1 style front wing, and do that out of steel to make a little more front weight bias since the engine is in the rear.
I know it's boring stuff but I'd throw two easy safety remedies in the mix: one tennis/pool ball on the shifter stick two avoid eye gouging and a sort of headrest to lower whiplash damages on the neck and to the head in case of unlucky rebounds
Can't wait to see the carbs working right, great helper that Charles, although he started out a little camera shy he obviously knows his way around a shop. Dudes...............FROM THE GROUND UP AWESOME RIG!!
I was familiar with the rooster I just didn't know his name. Sorry to hear that man believe it or not. I had a rooster when I was a kid that acted just like a dog. He'd be waiting for me at the bus stop every day coming home from school. You need to catch that raccoon
My god I've been watching you guys for years now it's always a riot, from the early budget builds, to the beast you have just created you've come so far. And john thanks for keeping ike alive with the voice of reason cheers
John, Isaac, I Ride A 1993 Harley XL 1200 Sportster and its only got 20k on the clock and after watching Isaacś face the 1st 10 foot of driving made my mind up I am parking my Sportster this winter as usual pr Vermont's Snow this winter is different I am pulling the engine tranny outta the bike and buying steel I think I want A Harley Cross Death Cart thanks for costing me Money this winter from Sean in Vt
for getting the air out of the brake line , the ups and downs in the line traps the air , its still a light vehicle , just lift the rear up untill its above the level of the reserviour and start bleeding , should work a lot better
Neighbors gotta love it... I had quiet go karts and we wore down the lawn, now we're getting booted from our rental home. Interesting kart project for sure - can't help but hear the neighbors screaming silently though, for sure.
As a certified Drag Racing Nut' I am eagerly awaiting for you guys to get this thing to the drag strip! This would be something I'd love to do, a motorcycle engine & trans but with a solid rear axle built along the lines of your dragster...
Kickass guys that thing rips! After she’s all fine tuned and buttoned up she definitely needs a busco beach day. Can’t wait for the next installment of the crosskart keep up the amazing work guys. BTW the silver paint on the c10 looks good.
AAAAWWWWW yeah!!!! Congratulations Fellas! NICE WORK! I'm Super Inspired!!!! I'm Definitely Building A CrossKart! I live about two hours from GoPowerSports, so I HAVE to make it up there to meet up with them n let them and Everyone Interested, WACO EAGLES MOTORCYCLE club is Building a short track for Mini Bikes, Dirt Track Karts, And Motorcycle Racing! I'd love y'all to come out and Join in on the Grand Opening near the end of this year!
You guys need to invite Roadkill or another show to come over and have some fun or take that thing to one of Cleetus McFarlands events. Those machines would win something for sure.
Just want to say thanks for another great show. Always fun to watch you guys build these amazing creations. Would be awesome if you had some sort of giveaway or a chance for someone to come and work with you for a day. As always it’s great to watch the channel keep it up.
was just scrolling through recommended videos and saw this, i missed an upload, i clicked on the video afap (as fast as possible) and watched the video to the end, i’ve been following the project from the start and it is amazing to see the progress in as little videos that you guys did it in. i am so excited to see what project is next, i know it’ll be cool. good jobs guys!
when i found out Leroy died i was like “oh sad” and thought that was the end and went on with making videos, but found myself like literally depressed and not wanting to do anything for a few days, *_R.I.P. Leroy_*
I would suggest a harness with a bucket seat and a taller head bar. And like someone else said a cluster with a thick roll cage spec tube to help in a roll over. But that ting is a freaking BEAST!
I was thinking this the whole video “they need a harness”. id listen to Charles, I mean if it was MY safety on the line I would. That thing is way to fast not to. I’d hate to hear about somebody flying out of it and it ending catastrophically. Keep up the good work guys I love this build it so awesome.
Well you 3 just walked out on stage and pulled the cover off your 750 cc Cross Kart, started with a bit of start up rhythm and broke into the fired up sound of one of the best builds on youtube , kicked ass and took names, with some carb work and a 4 into 1 collector for your exhaust my buddy the bike mechanic says you could possibly see 80/85 hp, it is a Frankenstein build and i thought you 3 could call it Phantom of the Paradise ,AKA the old movie from the 70's, your intro song could be LIFE AT LAST FOR YOUR NEXT VIDEO, and paint the side of the cart with a pissed off LEROY COMING BACK FROM THE DEAD TO GET THE RACCOON, THIS IS THE BEST YET
usually three's a crowd, But Charles adds a good dimension, the lad just was straight in, workin and chattin......nice dynamic...p.s isaac DROVE it, john n charles tried it!! nice one Isaac! ;)
WARNING: Put your front suspension >45° else it will bottom out when under load and you risk flipping over the front once the nose digs into the ground. This is why in your previous video, your suspension stuck when it was angled even more parallel to the ground. Do the head clearance ASAP. Nice work guys.
Sung to the tune of any ac/dc song....Won't you be my neighbor? Great vid guys. This is what kids do when the parents REFUSED to get them a motorized toy. lol...love it...keep up the great work. I'll tune in again later.
Side by sides can cost 20 to 30 k so building a custom jumping type cart would make for great craftsmanship, large # yt videos & views, and good old FUNXXX !!!!!!! Cars & Cameras will most likely gain tremendous exposure in many ways... Plus the right combination build just may secure (W/PROPER PLANNING & CONTACTS) some of the highest SPONSORSHIPS (DONATED PARTS) & MAYBE EVEN CAREERS DOING WHAT YOU BOTH LOVE DOING... BUILDING GO-CARTS!!!!!!
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
funny to see Charles so far back and to now see him in every video is funny. So glad he was added to the team. great work guys.
I've followed just about all of your builds and admire your attitude and skills. This one really hit home - it made me pull my almost-done Honda CMX 450 powered project out of the equipment shed. My wife put it into storage 5 years ago right after I broke my leg, and half the farm eventually got stacked on top of it.. I'm pushing 72 and figured it's get it done or sell it before either it or me rots away. Fortunately I had shut the petcock off on its last start up. All I did was replace the battery, clean the tank, and ran some fresh ethanol-free gas with a squirt of techron thru the carb - didn't even take it apart. Started and ran like it was last shut off yesterday. Forgot how loud it is thru 36" curved straight pipes with megaphone ends - neighbor a half mile away came over to investigate. I finished the clutch (bent the bike's clutch lever and mounted it as a foot pedal ) and fabricated the same kind of left-side jockey shifter. Took it for first ride with the right side tire in free-wheel. Light throttle, feathered the clutch, rolled out nice and quick, then nailed the throttle and it all but stopped moving - left rear tire just went up in smoke. Waiting on new set of Ebay tires all around. Once this one is done, I have an early Honda Pilot with a 2 stroke 398cc Kaw jet ski engine that 's nearly finished - just needs a better brake and a steering rack from GPS. Hope you guys are around for a long time to come.
Keep Charles around! He seems to know his way around a garage and seems like our kind of people. #givecharlesaraise
+1 thumb up right here. This needs more likes.
He definitely has good energy!
Yeah seems like good dude 👍
Estevan Charrette yea #givecharlesaraise
Impresionante 👍 saludos de España
I remember when it was just a pre cut coffin looking for a level spot to be welded.. man that thing turned out so freaking badazz.. never doubted you guys for a moment.. I’ll say it again that is the nicest and sweetest machine y’all have built to date..
Charles is a cool dude. Always going out of his way to try and help people out at Mini Mayhem. Hope to see more of him on the channel.
can we all as a group say a quick prayer for John's father's grass. 🙏🙏🙏
Can we say a prayer for the Angry Spider
thats hilarious
Your not funny
@@stinkymans5002 ]
It's cool young Owen Wilson decided to help out! Great video.
I thought the same thing.
wow! That's great!
Can we have an intern day contest? Dayum it's not often you see smiles as long a s the machine they're thrashing! Lethal, abso-freaking-lethal!
You mean 'Not Sure" decided to help out, he is the smartest man left alive....lol
Yea i know it his brother, just go with it....
Wow
Charles is super natural with you guys and seems hella comfortable on camera. Keep him around! Seems cool.
I think a gauge cluster would really look nice and potentially keep you from smashing your hands if yall roll over
Need a cage put on it like a Sprint car brace it toward the front then the arm restraints would work perfect
Awesome build guys! Please, don't forget to prioritize installing a firewall before further testing as I know how easy it is to be carried away and get exposed to an accident. Safety first! Keep the awesome content coming! Have fun!
Turned out better then I imagined it would. It looks like a blast to drive and sounds good too!
I was literally going to buy that motorcycle y’all used for this kart.
HOPE it holds together! it's a cool full susp racing go kart!
When I did my cart…I did it with a CB360 motor…fuel pump…hand shifter (half of handle bar with clutch lever) homemade live axle with 3wheeler tires and a sprocket the size of the wheel!!! Lone disk from the front of the bike! Thing was sick!!!
Suggestion: F1 style fiberglass body on it... and/or a huge wing
#bigwanggang
i think a rear wing yuou be worse. all the weight is in the rear with the engine so all its gonna to is lift the front iup making it harder to steer
And a big wing dang doodle
@@retrox684 You could easily make an aluminum wing that weighs all of a couple pounds and bolt it to that suspension brace in the rear. Since it wouldn't matter aerodynamicly till over 60 mph really in any meaningful way, it would be fine. Just don't make the wing out of steel and the balance won't be any worse than now. They could also do a front F1 style front wing, and do that out of steel to make a little more front weight bias since the engine is in the rear.
I came down here to suggest a big gnarly wing lol
I know it's boring stuff but I'd throw two easy safety remedies in the mix: one tennis/pool ball on the shifter stick two avoid eye gouging and a sort of headrest to lower whiplash damages on the neck and to the head in case of unlucky rebounds
Can't wait to see the carbs working right, great helper that Charles, although he started out a little camera shy he obviously knows his way around a shop. Dudes...............FROM THE GROUND UP AWESOME RIG!!
Wow, that thing sounds awesome and looks like a blast but also borderline spooky in that grass
Big wing and some slicks. This would be a track beast. It can be a cross kart and a track kart with a simple change of tires
ricer
SO2002 that’s not ricey though
A wing? Hahaha, yeah, not how aero works, but ok.
@@SMDTURBO you never know 🤷🏾♂️
SMDTURBO yeah but at speed it works, depending on the angle and size of the wing and extra aero, then yes that is how aero works
This is your finest work. Great looking cart.
Holy crap that sounds amazing!! Great job 👍👍
I would totally drive this!
It will be too fast
Hot dungus man I haven’t seen you since I seen the Xbox video with metal jesus
Nice build! I'm glad Owen Wilson was there to help out! ;)
I think this is your most badass build yet
Yall have to put a large functional or dysfunctional spoiler(wang)
B I G W A N G
@@crxstalline_ correction. B I G W A N G G A N G
Black panthaa
B I G T H I C C W A N G G A N G
I can't get over how good it sounds.
THE CROSS KART IS ALIVE!! I have to say though, Ike's face at 15:40 has to be my finest work yet😂
Lol
You guys needs to hook the old rpm gauge up on it seeing its cable drive it needs to be done
Again I ask who is Leroy
@@tebeardenkahboom1 Our rooster who was recently murdered
I was familiar with the rooster I just didn't know his name. Sorry to hear that man believe it or not. I had a rooster when I was a kid that acted just like a dog. He'd be waiting for me at the bus stop every day coming home from school. You need to catch that raccoon
My god I've been watching you guys for years now it's always a riot, from the early budget builds, to the beast you have just created you've come so far. And john thanks for keeping ike alive with the voice of reason cheers
John, Isaac, I Ride A 1993 Harley XL 1200 Sportster and its only got 20k on the clock and after watching Isaacś face the 1st 10 foot of driving made my mind up I am parking my Sportster this winter as usual pr Vermont's Snow this winter is different I am pulling the engine tranny outta the bike and buying steel I think I want A Harley Cross Death Cart thanks for costing me Money this winter from Sean in Vt
SEAN BENWARE I wanna see videos about that
Look up "stunt freaks team"and"grind hard plumbing" idk if you have. But there builds are badass! great Inspiration!
Fucking bad ass
The TruthSayer Dude, I take it that you have skipped school. You grammar often?
I left a comment on a previous video of this build on how I'd love to see something like this with a Sportster motor lol.
You guys was just to excited on this episode. Just so!!
Called it. 5 point. Not a bad investment plus you can get a full back seat to block the heat. Bad ass guys.
Glad to see music back in the videos!!!!
for getting the air out of the brake line , the ups and downs in the line traps the air , its still a light vehicle , just lift the rear up untill its above the level of the reserviour and start bleeding , should work a lot better
That thing sounds bad ass even though the carbs still need tweakin'. The smiles tell me how fun she is. : ) Stay safe guys.
U guys need an actual racing bucket seat it will help alot
james knocke They need to be strapped in lol. It looks like if you got ejected, the bar supporting the steering wheel would snap your femurs in half.
Absolutely!!
Neighbors gotta love it... I had quiet go karts and we wore down the lawn, now we're getting booted from our rental home. Interesting kart project for sure - can't help but hear the neighbors screaming silently though, for sure.
Looking great, and the welds might not be the prettiest, but they are functional. Cheers.
As a certified Drag Racing Nut' I am eagerly awaiting for you guys to get this thing to the drag strip! This would be something I'd love to do, a motorcycle engine & trans but with a solid rear axle built along the lines of your dragster...
A fire wall, some more bracing, and you'll be good to go
Need bigger wheels also .... thing looks silly....looks bad and hurts the carts performance
Looks scary fast and a whole lot of fun. Thanks.
Kickass guys that thing rips! After she’s all fine tuned and buttoned up she definitely needs a busco beach day. Can’t wait for the next installment of the crosskart keep up the amazing work guys. BTW the silver paint on the c10 looks good.
I think this is the best project of CaC !
AAAAWWWWW yeah!!!! Congratulations Fellas! NICE WORK!
I'm Super Inspired!!!!
I'm Definitely Building A CrossKart!
I live about two hours from GoPowerSports, so I HAVE to make it up there to meet up with them n let them and Everyone Interested, WACO EAGLES MOTORCYCLE club is Building a short track for Mini Bikes, Dirt Track Karts, And Motorcycle Racing!
I'd love y'all to come out and Join in on the Grand Opening near the end of this year!
the overdramatic sequence with ike getting into the kart was AMAZING. more like that!!
Awesome, it’s gonna smash the record around the yard track 👍
You guys need to invite Roadkill or another show to come over and have some fun or take that thing to one of Cleetus McFarlands events. Those machines would win something for sure.
Just want to say thanks for another great show. Always fun to watch you guys build these amazing creations. Would be awesome if you had some sort of giveaway or a chance for someone to come and work with you for a day. As always it’s great to watch the channel keep it up.
Loved the slow mo retro start of the cart. Had a cool 70s vibe!
This is freaking awesome guys! I have enjoyed every bit of this build.
Not gonna lie, I love this so much. The look of the car. The tune of the motor. I love it
Now I gotta start building 1. That looks like a blast, you guys rock 🎸👍
Really cool edit of starting the kart up
when does it stop being a go cart, and becomes a dune buggy ? Whatever it is I love it ! ! !
robert miller this is boarder line I’d say, but it’s perfect
not even a bit dune buggy, dune buggies are built for dunes...
Usually it becomes a mini buggy when you add suspension.
Buggys tend to use car motors and tranys long travel suspension and full size tire wheels and breaks.... not those timy wheels
I mean my lawn mower has bigger wheels
was just scrolling through recommended videos and saw this, i missed an upload, i clicked on the video afap (as fast as possible) and watched the video to the end, i’ve been following the project from the start and it is amazing to see the progress in as little videos that you guys did it in. i am so excited to see what project is next, i know it’ll be cool. good jobs guys!
with the tire set up and the flat arms it looks like a formula 1 racer. WOW is that thing loud!!
Hell yeah cars and cameras that's one badass ride
when i found out Leroy died i was like “oh sad” and thought that was the end and went on with making videos, but found myself like literally depressed and not wanting to do anything for a few days,
*_R.I.P. Leroy_*
Super dope kart guys love it. Thinking about building one for my self and my young boys!!
Awesome guys . It should be called "The Widow Maker"
You guys are the best. Perhaps a bulkhead between the driver and the headers.
Sounds like a Group B rally car. :-D
Or a older wrx
The casual professionalism is awesome love your content.
I feel like if you put some sand tires on that thing it would be insane on some sand dunes.
And bigger tires those tiny thing would sink
It already looks like fun, can't wait to see a full rip on the next video
Think ya may have another winner on the Grand Prix Course! Ya gotta get a time on it!
Awesome video and build.
Charles, more Charles. You guys are great too.. awkward. Great video gang.
My favorite build thus far. Only thing it needs is a paint job and taller tires. I honestly think something like off a UTV would look sweet!
Looks so good,!!! That thing is crazy fast. And so much torque, looks great out there
I would suggest a harness with a bucket seat and a taller head bar. And like someone else said a cluster with a thick roll cage spec tube to help in a roll over. But that ting is a freaking BEAST!
I was thinking this the whole video “they need a harness”. id listen to Charles, I mean if it was MY safety on the line I would. That thing is way to fast not to. I’d hate to hear about somebody flying out of it and it ending catastrophically. Keep up the good work guys I love this build it so awesome.
Weight Reduction
If Charles has any future free time I really enjoyed him chipping in, seems like extra hands for projects like this really helps
HE'LL YEAH THAT SUCKERS A SUPER MONSTER! Man I can't wait to see some bigger tires and the finish product!
Way to go dudes! Well done on a great build so far. Hope to see more of Charles! He has what it takes!
I call it the Miatonda kart, part miata, part honda in a kart.
Well you 3 just walked out on stage and pulled the cover off your 750 cc Cross Kart, started with a bit of start up rhythm and broke into the fired up sound of one of the best builds on youtube , kicked ass and took names, with some carb work and a 4 into 1 collector for your exhaust my buddy the bike mechanic says you could possibly see 80/85 hp, it is a Frankenstein build and i thought you 3 could call it Phantom of the Paradise ,AKA the old movie from the 70's, your intro song could be LIFE AT LAST FOR YOUR NEXT VIDEO, and paint the side of the cart with a pissed off LEROY COMING BACK FROM THE DEAD TO GET THE RACCOON, THIS IS THE BEST YET
"Little poop came out" lmao that thing looks fun as hell guys. Great job!
Isaac- "I wont break it"
2 seconds in- throttles it up, dumps the clutch.. 😂😂😂.. I friggin love it.. Awesome build, gentlemen.. 🍻🍻🇺🇸🇺🇸 salute..
usually three's a crowd, But Charles adds a good dimension, the lad just was straight in, workin and chattin......nice dynamic...p.s isaac DROVE it, john n charles tried it!! nice one Isaac! ;)
Loved this build. Best gokart on the channel imo. More of these please lol. Next do a mini rail with long travel suspension.
You have to dub it Leroy! In the “slowmo” it even goes “b’cah b’cah” just before firing up! Haha. I am being humorous but also serious. R.I.P. Leroy.
OMG YES!
That is a beast. One of the best on TH-cam yet.. Now to really stamp that down you should put a body and a functional cluster...
your neighbors most love you, sick ride
That looks like fun! I haven't wanted to ride anything this bad since the rat rod wagon, black widow, or the racing mower.
Best build u guys have done so far. Keep on going!
Great episode! Please get those safety upgrades done!
I think yall should put the guages from donor bike on there. It would be badass
You need to bring this to Pikes Peak.... Awesome cart
that was a blast,
Whats the engine?
That thing is a beast
DUDE!!!!!!!! I’m jealous! I’m making one of my own but the biggest motor at first will be a 212cc
This is the most Mario kart like one I’ve ever seen
Awesome build and another ripper episode, Charles seems cool and knowledgeable, it'd be great to see him in some future projects guys.
dont get impaled on that shift lever
WARNING: Put your front suspension >45° else it will bottom out when under load and you risk flipping over the front once the nose digs into the ground. This is why in your previous video, your suspension stuck when it was angled even more parallel to the ground. Do the head clearance ASAP. Nice work guys.
Damn I'm impressed it's like a little Formula 1 car.
Charles is cool! Nice work guys!
Been waiting for this video since the teaser video on FB...
Sung to the tune of any ac/dc song....Won't you be my neighbor? Great vid guys. This is what kids do when the parents REFUSED to get them a motorized toy. lol...love it...keep up the great work. I'll tune in again later.
Side by sides can cost 20 to 30 k so building a custom jumping type cart would make for great craftsmanship, large # yt videos & views, and good old FUNXXX !!!!!!! Cars & Cameras will most likely gain tremendous exposure in many ways... Plus the right combination build just may secure (W/PROPER PLANNING & CONTACTS) some of the highest SPONSORSHIPS (DONATED PARTS) & MAYBE EVEN CAREERS DOING WHAT YOU BOTH LOVE DOING... BUILDING GO-CARTS!!!!!!
That is definitely your best sounding project ever!