You could have added one motor on each wing to turn and one main motor for forward and backward. You could have covered the extra wiring hanging out but anyways much much better than the previous planes made out of cars etc. great job fantastic.
Next model put some dihedral on it and make it fly by radio control with rudder and elevators,forget the servo tester those are not supposed to be attached to the model,you are getting there.
Two more servos mounted up front with rods extending toward the back and you can have an elevator and Rudder that works and you can fly the plane, all day!!!! And it will work!!!CLASS DISMISSED!!!
You know why this plane could not fly, because the weight of components is on one side only, so it gets tilted and imbalanced.you must be knowing that. Secondly, since you have all these perfect components then why thermocol used for fuselage? There is a very light weight wood out there. Try willow wood from discarded cricket bat. I am not sure about. Find it out. Any way, good job. Keep it up. Bye.
Why would you leave out the servos? It's pointless even flying without them. And the manual speed controller running off your ESC just defeats the purpose.
1000kv motor with esc : www.flyrobo.in/1000kv-a2212-brushless-motor-with-30a-esc-for-rc-airplane-quadcopter-multirotor?tracking=5cab038fc6dtt
Servo tester: www.flyrobo.in/multi-servo-tester-esc-tester?tracking=5cab038fc6dtt
Propeller: www.flyrobo.in/1045_propeller_10in_10x4.5_for_drone?tracking=5cab038fc6dtt
Lipo Battery: www.flyrobo.in/zop-power-lipo-battery-11.1v-2200mah-3s-30c?
tracking=5cab038fc6dtt
Charger: www.flyrobo.in/imax-b3-lipo-balance-charger-for-2-3-cell-lipo-battery?tracking=5cab038fc6dtt
Remote control with receiver: www.flyrobo.in/flysky-fs-i6-2.4g-6ch-afhds-transmitter-with-fs-ia6b-receiver-for-rc-fpv-drone?tracking=5cab038fc6dtt
وربي تقنت الصنع وربي طائره ضخمه
Bro realy its amazing supeeeeeeerrrrrrr👍👍👍👌👌👌👌👌👌👌
Thanks
Nearly at 1 million congrats
Thanks
Very nice
What a great idea wow you got this idea
It is taught simple l❤it
Great idea....and the taste of success after hard work is different...... keep going....👍👍👍👍👍👍👍👏👏👏👏👏👏
A STAR CREATION hi . I like your name . Have a good day
Thanks
7 Minutes Creative your's too....
amazing
First time you made to fly good
You two are working together. Means you are wright brothers!
Best channel in world
Nice nice work 😍😍😍😍😍
Good dog ✌️😂
I love it since it flies and I still love the music
Beautifully created
You could have added one motor on each wing to turn and one main motor for forward and backward. You could have covered the extra wiring hanging out but anyways much much better than the previous planes made out of cars etc. great job fantastic.
Thanks
Next model put some dihedral on it and make it fly by radio control with rudder and elevators,forget the servo tester those are not supposed to be attached to the model,you are getting there.
i m done
nice video and airplane, but you should add controls to it like rudder, elevator ad ailerons
sooooo cool and i love it
Beautiful
Thank you! Cheers!
Wow you are good at making toy and thing
Awesome great mind
Thank you! Cheers!
@@MakeYourOWNCreation I want to make a missile type toy is this possible
gooooooooood perfecte and nic 😁😁😁😁😁😁😁😁
Thanks
Nice bhai.
good job👍
The motor is very powerful
Nice video
It worked👍
It was brilliant
Your link is useful nice
Now I am going to made this ✈
great effort.nice video.thanks.
Dog
Yes it's very good that's like a passionate aeromodeler
I like it very well this is the fantastic project
Thanks
Great work bro
This made me smile
How many things must be used in this
what is your palne wight total
Eu sou o primeiro
I knew you could do it brother very nice keep up the good work
Thanks
Wow ! impressive work !
IMO you got to adjust center of gravity in this plane to make it fly better.
Super bro
Woooooooooooow😯😯
How much weight it have bro
Plan cutting and cavities of fuselage before joining or attaching anyting. Go with the plan first. You can do that. Thanks.
I m done, watch my New flying airplane, Thanks
Nice plane
Thanks
The best airplane in the world
Super se uper
You should work for Boeing
Very Good !!
Interesting video 👍👍👍
Thanks
Make Your OWN Creation thanks bro ❤️❤️
From where did you get those transmiter and reciver. Due to the lack of batteries and transmiter my plane is only half made. Thanks for the video
Good work
Me gusto mucho es muy lindo y genial
Servo motor kya main lgau
Hey sir what battery do you use for that?
I wish you get 100m sub
Nice
Bro,
Please don't shut power too early when taking off. That's the time it needs lots of power.
Nice bro
Wow unbelievable that u can do it lol ... great job
Thanks
Which glue stick is used in creation
Two more servos mounted up front with rods extending toward the back and you can have an elevator and Rudder that works and you can fly the plane, all day!!!! And it will work!!!CLASS DISMISSED!!!
Thanks
He's right, dude. Take a look at the Flite Test videos. ;)
soon i will
Top em mano
Super super
i was the 493, 493th viewer
Doggy missed his flight by a whisker.
Yours is a lovely comment.
Hi. Good
How does the landing gear work in takeoff?
inqreible nadamastesa den bichidoati aigeniab fantastico sadudos
Great bro that's is cool
What is the dimensions of the plane wing fuchelar etc?
bro flash XXD HW 30A ESC...... mine is not working properly....
yes
I heard very good opinions about the Stodoys plans.
Nice work
super
Please give me fast dc motor link
cara gostei do seu avião que pena que eu não seio montar um só seio fazer de palito de sorvete mas parabéns
Sir, what's the wingspan.
Hello you have made good very good and I will make this so can I know that you are whare this part ???
amazon
Sir how can you turn plane without servo motor
ok
Is it possible to do the main body with 5mm styrofoam which you have given in the description. Kindly advice as im planning to do this project
watch my new flying airplane
mast
You know why this plane could not fly, because the weight of components is on one side only, so it gets tilted and imbalanced.you must be knowing that. Secondly, since you have all these perfect components then why thermocol used for fuselage? There is a very light weight wood out there. Try willow wood from discarded cricket bat. I am not sure about. Find it out. Any way, good job. Keep it up. Bye.
Were will I get all these things
brush less motor kha miltihe
amazon
Awesome work, dude! :D
With only one control surface (elevator only), I wouldn't call this awesome work :-P
Still a good try though..
Last Me background music ka name kiya he?
Propeller link
Can you give me the link where do you bring song for animation
Can you make one more remote control brushless motor aeroplane
soon i will
Can u share the name of components
Can u provide the connection diagram
???
?????
Soy primero :V
bro will it works without ESC
Bhai Ween ka size kitna h bro
You need to add servos and also improve the design you done.
soon i will
Bro R u from
Karnataka?
yes
👍👍
Why would you leave out the servos? It's pointless even flying without them. And the manual speed controller running off your ESC just defeats the purpose.