As a 70 year old, just seeing how modern materials replace the balsa kits(when we were 12 years old) where each rib and gusset was cut out with an Xacto knife. Covered with tissue and dope (and fuel proofer)to be replaced later with iron on coloured film. Thimble Drome, Cox, Fox and Enya where the power plants in use. Radio control was in its infancy with the first being rudder control (yaw induced roll) using rubber band escapement “technology”. We only had control line! The rich kids had a PT flight trainer from Thimble Drome, but we had plans and an .049 baby bee! One motor for a hundred home made planes! Today you can buy a ready made plane with all the accessories, motor virtually already running in the box! No fun in that. Kudos to this aero modeller. Now to find some hd foam! 👍😀
This is what an aeromodeller used to be. It's nice to be spoiled these days with ready made models but it's good to see someone still has scratch-building skills and is willing to share them!
For years I spent way to much money on over priced styrofoam airplanes and was never truly happy with how they performed, now I build my own out of foam board from the dollar store and have made changes to my designs to get them to fly exactly how I want them to. It took a lot of trial and error and a lot of research but in the end it's a great feeling flying something you created and flys better then others $800 airplanes.
Awesome build. I really like that you are reusing materials that would otherwise end up in the landfill. I am just now getting back into RC after a long time off. May have to put this one on the "to do" list. Thankyou for sharing.
It's great to see someone who is dedicated and has talent for building model aircraft at the plant. I have several models made by me, some are kits, others I used plans from Don Smith and Zirole. I used a lot of sandpaper, a stylus, carbon paper, glues and many tools I made myself. Parabéns meu jovem.
Bro i respect this so much. Ive been livin years without knowing about this rc plane stuff. Props to u man and i hope i’ll be able to build this in a couple of months when i get the basics down!
Very cool build! Now I want to build an RC airplane. I have several but haven't taken the time to make one. Your techniques are also great if you just need to rebuild a crashed airplane and need to fabricate section of one. Awesome video!
I JUST HATE WATCHING PEOPLE WITH SO MUCH TALENT..IT JUST ENDS UP SHOWING ME IN EXACTLY WHAT AREAS I HAVE FAILED IN MY LIFE...LEAVING ME TO SPEND AT LEAST TWO HOURS EVERY AFTERNOON WALLOWING IN MY OWN SELF PITY...😅😅😅😅😅 (GOOD JOB BUDDY)
Perfect take off and landing. Excellent creation of this Cessna.. Been looking for something like this for long time. I am planning to recreate one like this. Appreciate all the effort by the creator
Suggestion: you have a wire foam cutter, why didn’t you use this to cut out the parts for the fuselage? Would have saved time and also better finish than saw blade or knife
man this is amazing, so much from so little, and yet looking so much the part... my first RC plane was a Cessna 150 (almost 50 years ago), and I remember it eventually flying a bit too fast for confort from being overloaded (too much paint and glue at the rear I suppose, then hefty balancing lead like half a pound, later swapped for a stronger motor...)
Que buen video gracias por compartir, la verdad me gustó mucho, desde hoy uno más del canal gracias por compartir sus conocimientos Dios le bendiga mucho, saludos desde Santa Catarina Pinula Guatemala bendiciones
Great Build! As I am a person who loves rc planes, it would be great pleasure if you gave a circuit diagram for the reciever and also how to make the foam landing gear And as an Indian buying transmitters and recievers is not cheap so will this reciever and transmitter work? FlySky FS-CT6B 6ch 2.4GHz Transmitter & Receiver
Hi Just about to start building this. Do you have details on the motor and esc you used? Can I use the same one you used for your Piper (As I may build that next if this goes well). Thanks
Hello Bro,I hust Wanted To Know that can i use themocol wheels.....and what should be the overall weight of this plane(including electronics and the battery)
As a 70 year old, just seeing how modern materials replace the balsa kits(when we were 12 years old) where each rib and gusset was cut out with an Xacto knife. Covered with tissue and dope (and fuel proofer)to be replaced later with iron on coloured film. Thimble Drome, Cox, Fox and Enya where the power plants in use. Radio control was in its infancy with the first being rudder control (yaw induced roll) using rubber band escapement “technology”. We only had control line! The rich kids had a PT flight trainer from Thimble Drome, but we had plans and an .049 baby bee! One motor for a hundred home made planes! Today you can buy a ready made plane with all the accessories, motor virtually already running in the box! No fun in that. Kudos to this aero modeller. Now to find some hd foam! 👍😀
I know exactly how you feel . I get to be 70 for another month .
Seeing u still here make us believe to stay strong if u dont giveup life wobt make u an old man ❤
I love the enthusiasm, just know someone is looking up to you
Ich bin auch "Ü 70"! Klasse!!!! (Polaris XL, Sopwith Camel, 1.80 m, Andreas von Höllein) Gerhard
4č que
This is what an aeromodeller used to be. It's nice to be spoiled these days with ready made models but it's good to see someone still has scratch-building skills and is willing to share them!
😮
For years I spent way to much money on over priced styrofoam airplanes and was never truly happy with how they performed, now I build my own out of foam board from the dollar store and have made changes to my designs to get them to fly exactly how I want them to. It took a lot of trial and error and a lot of research but in the end it's a great feeling flying something you created and flys better then others $800 airplanes.
@@jordancoleman2402o
चषजजखउ यलख
so basically you did what flite test did and has been doing for 15 years@@jordancoleman2402
The flip and the smooth modelling was everything for me. This is now gonna be my new hobby!
Impressive build from styrofoam! I liked your homemade drill. Shows creative thought and DIY skills.
Это примитивная модель
Awesome build. I really like that you are reusing materials that would otherwise end up in the landfill. I am just now getting back into RC after a long time off. May have to put this one on the "to do" list. Thankyou for sharing.
Fantastic work, buddy! It flies really well! 🙌🏻
Hey Max, big fan from India, love your creativity and will to create! Planning to contact you regarding some ideas soon!
That's modeling, right there! You don't have to spend a ton of money to enjoy the hobby! Right on, brother!
Nice work! I like the hot wire cutting of the wings.
Hi which battery pack do you use and how much time do they last in the air?
Thanks
It's great to see someone who is dedicated and has talent for building model aircraft at the plant. I have several models made by me, some are kits, others I used plans from Don Smith and Zirole. I used a lot of sandpaper, a stylus, carbon paper, glues and many tools I made myself.
Parabéns meu jovem.
Fantastic work. Great skill manual that no longer exists today.
Maravilloso trabajo. Gran habilidad manual que hoy ya no hay.
Nice plane, video and well edited. Shows what you can do for relatively little cost. Much more satisfying than buying artf!
Great idea to cut spar grooves into airfoil template. Nice build!
Bro i respect this so much. Ive been livin years without knowing about this rc plane stuff. Props to u man and i hope i’ll be able to build this in a couple of months when i get the basics down!
Great satisfying build sir. Thanks for sharing it.
I bought a Cessna182 Rc plane before watching this but making it yourself is just so special
Simples e perfeito, um ótimo modelo para se iniciar... 👏🏻👏🏻👏🏻👏🏻
❤😊🎉
6:15 que bien queda el corte, buenisima esa tecnica
Excellent solution for the construction, with cheap and easy available materials, but efficient in terms of resistance an weight.
Very nice. You did a great job. Thank you for all the building tips.
My compliments, wonderful work, greeting's from Rome Italy 😏💪👏
That's awesome! And....inspiring! Awesome power drill!
Very cool build! Now I want to build an RC airplane. I have several but haven't taken the time to make one. Your techniques are also great if you just need to rebuild a crashed airplane and need to fabricate section of one. Awesome video!
Very pleasing and practical, thank you😀
Wow great idea for working aeroplane
dayummmm!! simple and awesome! 👌
There is a point that this toy plane look real cessna 🤩
That cutter for cutting wings where can I get it? Awesome techniques here
This is i think the best video about making planes that can teach me and motivate me to make one
Smart and neat work.. very well done man.. thanks a lot for your good effort.
Your building techniques is very very impressive 😊
А моя?
Great job, that thing looks awesome!
I JUST HATE WATCHING PEOPLE WITH SO MUCH TALENT..IT JUST ENDS UP SHOWING ME IN EXACTLY WHAT AREAS I HAVE FAILED IN MY LIFE...LEAVING ME TO SPEND AT LEAST TWO HOURS EVERY AFTERNOON WALLOWING IN MY OWN SELF PITY...😅😅😅😅😅 (GOOD JOB BUDDY)
Where could I get the plans for this playing? It looks great.
In one word - GREAT 👌👌👌👌
Wow keep it up 😊😊😊😊❤❤❤❤❤🎉🎉🎉🎉🎉🎉🎉
very nice extreme maneuvrebility . well done 👍👍👍👍
Top job. Looks and flies great. 🛩👌👍
Very talented I was lamenting the scarcity of balsa but this gives me new possibilities thanks.
Nice work, she's a beauty, and handles very nice also.
congratulations very successful. 👏👏
Good, solid design. Nice job.
Bro ur an absolute legend
had fun watching
Thanks
Glad you enjoyed
Great job very beautiful 🎉
Superb. I am going to
making . thanks for this simple tips
Perfect take off and landing. Excellent creation of this Cessna.. Been looking for something like this for long time. I am planning to recreate one like this. Appreciate all the effort by the creator
Bro thermocol se jb wood ko fevicol se lgate h to kitne der bd proper dry hota h
Very impressive!! The wing struts add a nice touch. 👍👍👍👍👍👍👍👍
Love your drill and hot wire cutter. You are one gifted individual!
Thank you for giving me a model and you deserve everything🥰🥰🥰
Your mini drill is badass!
Impressive, nice idea to create wing
what could be better than this. marvellous!!!!!
Do you have a video showing your foam cutter? Nice work!
Very very nice ... you have a golden hands 🖒💐
Thanks a lot 😊
Robust build. Thanks for the video.
Sir, can I use 1000kv motor? nice work by the way!💚
Great work wonderful excellent idea and explained very good
These videos are so satisfying to watch, I love them
Nice one Jonu .........
Rapi banget om hasilnya mirip buatan pabrik
i hope you can feature all the materials needed and where to buy them..great work!!
Modellfliegergrüße nach Asien! Danke, was zum Nachmachen!
Watching you make the wing was very satisfying!
WOW!!!.. just WOW!!!
Suggestion: you have a wire foam cutter, why didn’t you use this to cut out the parts for the fuselage? Would have saved time and also better finish than saw blade or knife
Very good and very nice. Beautiful. Fantastic. Sir
man this is amazing, so much from so little, and yet looking so much the part...
my first RC plane was a Cessna 150 (almost 50 years ago), and I remember it eventually flying a bit too fast for confort from being overloaded (too much paint and glue at the rear I suppose, then hefty balancing lead like half a pound, later swapped for a stronger motor...)
Hi friend, Thanks for such beautiful work. I just wanted to know how you made that foam cutter used to cut the wing. Thanks
Love your videos so much 😊
Great R/C plane! Nice work! Cheers! 😁🔧🛠️👍
Thanks 👍
BRAVOO...BRAWOOO !!! DZIĘKUJĘ, dziękuję!!! POZDRAWIAM.
Thanking you for sharing. Great job, I really enjoyed watching this!
Que buen video gracias por compartir, la verdad me gustó mucho, desde hoy uno más del canal gracias por compartir sus conocimientos Dios le bendiga mucho, saludos desde Santa Catarina Pinula Guatemala bendiciones
Flawless landing. Impressive.
Great Build!
As I am a person who loves rc planes, it would be great pleasure if you gave a circuit diagram for the reciever and also how to make the foam landing gear
And as an Indian buying transmitters and recievers is not cheap so will this reciever and transmitter work? FlySky FS-CT6B 6ch 2.4GHz Transmitter & Receiver
....excellent video....having built airplanes with foamboard....love the use of this foam....thanks
Hi
Just about to start building this. Do you have details on the motor and esc you used? Can I use the same one you used for your Piper (As I may build that next if this goes well). Thanks
Outstanding bro🎉🎉🎉🎉
Dude this is by far one of the best video
I have seen.
No real print's, I think 🤔 you have more brain cells then me 😅.
Great video.
Can we use another transmitter and receiver if flysky fsi6 is not available ??
please help me, from where can we manage the electronic material needed to make it??
Very nice as easily made thanks for sharing your knowledge and greetings from UGANDA
Fai un tutorial specifico per l'inclinazione del motore? Grazie.
can you please give the plan link of fuselage. i am trying to make a rc plane like your i am inspired by you
What is the flying weight?
Which Transmetter install ?
F18
Sir from where do you get the airfoil template
👍👍👍👍 excellent 👌
This is a truly amazing build. The engineering is amazing.
Great job bro! Rc planes are the best nice work.
Well done.👍 Looks exactly the same that horizon hobby wants you to buy for 300 bucks 😂😂😂
Wow😮
Appreciate your work👍👍
well done. and CHEAP! Thaat is the spirit of modling...Congratulations and greetings from Brazil :)
Fella you make it look so easy Great work
❤❤❤❤درودبرشما بسیار عالی ❤❤❤❤
❤ ขอบคุณคุณโยมมากมากมากครับ
Did you gave down and right thrust
Hello Bro,I hust Wanted To Know that can i use themocol wheels.....and what should be the overall weight of this plane(including electronics and the battery)