How To Make RC Trainer Airplane. DIY Model Airplane For Beginners
ฝัง
- เผยแพร่เมื่อ 18 พ.ค. 2020
- Making RC trainer model airplane for beginners. Brushless motor, Four channels.
Necessary Materials:
* 2212 980 or 1400KV Brushless Motor: s.click.aliexpress.com/e/_Dlo...
* 8x6 propellers: s.click.aliexpress.com/e/_DCO... OR
www.banggood.com/custlink/v3m...
* 30A Brushless ESC : s.click.aliexpress.com/e/_DED...
* 1 x LiPo Battery 11.1V 1000 mAh: s.click.aliexpress.com/e/_DEn...
OR 11.1V 1300 mAh: s.click.aliexpress.com/e/_Dd8... OR
www.banggood.com/custlink/KD3...
* (2pcs) 40mm wheel: s.click.aliexpress.com/e/_DBK...
* 4 pieces horns: s.click.aliexpress.com/e/_DDC...
* 4 or 6 channel radio control system: s.click.aliexpress.com/e/_Dkv... OR
s.click.aliexpress.com/e/_Ddu... OR s.click.aliexpress.com/e/_DCP...
* 4 micro servos (may be 9gr servos): s.click.aliexpress.com/e/_Dm9... OR
www.banggood.com/custlink/DvK...
* Gold Connectors 3.5mm: s.click.aliexpress.com/e/_Dmx...
* Wheel stopper: s.click.aliexpress.com/e/_DCc...
* Y extension cable: s.click.aliexpress.com/e/_Deg...
* Adjustable Linkage stopper (Easy Link): s.click.aliexpress.com/e/_Dkv...
* Pushrods & landing gear rod: s.click.aliexpress.com/e/_DEN...
* L type nylon clevis keper clip: s.click.aliexpress.com/e/_Dku...
* Canopy Hatch Lock : s.click.aliexpress.com/e/_DE3...
* Fiber Strips Adhesive Tape : s.click.aliexpress.com/e/_DlM...
* Fastener strip : s.click.aliexpress.com/e/_DnN...
* Brass Tube: s.click.aliexpress.com/e/_Ddx...
* Plastic Tube (2x3): s.click.aliexpress.com/e/_Dmt...
* Optionel steering arm: s.click.aliexpress.com/e/_DdD...
* M3x16 screw for steering
Lipo Battery Charger: s.click.aliexpress.com/e/_DF5... OR
s.click.aliexpress.com/e/_Dlw...
Hot melt Glue Gun: s.click.aliexpress.com/e/_DkC... OR
s.click.aliexpress.com/e/_DnD... OR s.click.aliexpress.com/e/_Dl2...
Screw Locking: s.click.aliexpress.com/e/_DEp...
Onboard Camera:
RUN CAM II 1440P: s.click.aliexpress.com/e/_DkH...
RUN CAM II 4K: s.click.aliexpress.com/e/_DFv...
Thanks for watching. If you want to support my channel, join.
/ @kendin-yap
Some of the shops that sell Kraft Foam Board:
www.amazon.in/Pacon-Water-Res...
pacon.com/board-480/water-res...
tinyurl.com/4ups272k
www.foamboard.shop/en/foamboa...
www.enasco.com/p/Pacon-Water-...
www.mwmaterialsworld.com/es/p...
Technicial Specifications:
Lenght: 640 mm
Wing span: 810 mm
Flight weight: About 495 gr
Center of gravity: 4.6-5.2cm from the front of the wing
Required control system: Min. 4 channels, 4 micro servos
Suitable battery: 11.1V 1000Mah - 1300Mah Lipo battery
Suitable motor: 2212 Brushless Motor (980-1400KV)
Suitable propeller: 2 Blade 8x6 (8060)
DIAGRAMS and DETAILS: cutt.ly/R88mHJ7
My Web Site (KendinYap): www.rcpano.net
All of my videos : bit.ly/2Z9QVYK
Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos. - แนวปฏิบัติและการใช้ชีวิต
My dad recently told me that he missed his old collection of model airplanes so I’ve started trying to make him a few! Thanks for the tutorial! I’ll be watching this a lot lol
You seem like a very good son/daughter. Good job!
snail
@@Onealcasamis1996 snail
@Aron Zakai nice try
Hello
I built it and it flies amazing, thanks
Plz tell me where you get the materials and list of materials required for this plane only
@@salmankhan-ek2dj from the description
How much does it cost ??
@abdul bari ok thanks
Where do you get the receiver and levelators
You are actually a legend, this is one of the best DIY videos I've seen in general. Very thankful for providing diagrams and the parts list in the description!
This is as good as flight test i like the measurements highlight in the video thats great
What's your age
@@someone.-_497 your mom
@@someone.-_497 Why asking?how does it relate with the subject matter?🤡
Ke ke metarias lagbe. Amio try korbo
This is the only RC plane guide that is complete My RC plane could not have been possible without this thank you a lot for making this.🙏😃
Wow!!! This is a great build. Seems very simple and straight forward. Plane looks great. Love the landing gear.
Very nice. Amazing how inexpensive it is in both material and workmanship, yet it flies flawlessly
it's quite expensive
Quiet expensive bruv. RC plane hobby is an expensive hobby
Yeah currently building it it’s like 70 hours 200$ in
But lots of fun
Hello how you doing?
One of the first planes I built when getting into the hobby of scratch buiilding. It's truly a great trainer for building and learning to fly. Thanks for helping us out.
i am planning to built this rc airplane this video is very help thank you !! grazie dall'italia
Wow, super job showing how to do this and particularly providing a complete list of where to find everything!
I have a question how does he get the servo working without a receiver do you need a receiver for servos to work?Thanks in advance.
Oh nvm
@@Ephraim610 see the video he connected the servo to the receiver
Finally a plane which doesn't need 3d printing, cheap and top-notch quality. Greetings on behalf of India!
You can buy a cheap 3D printer He is so useful
@@bekodevs1793 *it
This video rekindled a long lost fascination for flying model planes , at 68 I will begin again and who knows maybe some of my grand kids will come on board. Thankyou so much.
Thanks for helping me make my first RC plane that works!
My first plane was a delta wing, didn't work because the wings were too small, then I tried your design but made it 1.3x bigger and tested it twice, it flew both times but I only flew it for 5 seconds the first time and 10 seconds the second time since I never flown an RC plane before.
Thanks again for this amazing video!!!
How much did itvtake
@@randomcat201 The transmitter and receiver were around $75, motor was $15, foam was $3, pack of 4 servos were $5. So a little over $100.
@@ammar_arain damn
@@ammar_arain yo, are all the parts in the description or are there extra parts? How many wheel stoppers did you need?
@@pescetv8371 All the parts seem to be in the description. I didn't use any wheel stoppers because I didn't have any available so I just cut out a piece of foam and stuck it to the end of the rod (a pretty bad way to actually do it). But 3 wheel stoppers should be enough for this design.
Who the heck would want to downvote this?!! Incredible job building and flying this and thank you so much for sharing!
So excited to try this myself :) thanks for sharing your wisdom and craft
This is amazing. You are a genius. I've been considering building an RC plane for some time and this has given me the inspiration to make a start.
This is awesome and *thank you* from Sydney. My son and I are about to build a 150% model of this and have all the components ready. We'll be attempting to build it from corflute (or coroplast as it's called elsewhere). Slightly heavier material but we'll give it a crack anyway. Cheers and thanks - Dave and young Will
Have you started it yet? If yes what's the current situation? Greetings from Turkey.
@@fatihbural7845 Hi Fatih - thank you for your interest! Yes, we did make it but our maiden flight was not so successful due to high winds. Since then we haven't yet flown it properly but will try to do so when we get a chance. My experience tells me that it should fly pretty well (on a calm day). Here is a video my son and I made of the build: th-cam.com/video/_hjK549euos/w-d-xo.html
Cheers from Sydney, Dave :-)
What about the receiver? What did you use?
@@deldridg well congrats for making and having this experience! I have checked the link and also subscribed to the channel. Great work!
Congrats. I think your design was %150 bigger than @kendinyap. I just wonder that what did you use motor, propeller, esc and battery combination. Also, can you say that bigger is better for this plane for training stage.
Thanks and hello from Turkey.
Last one, could you please share detailed dimensions of your design and plans if it is possible. Thanks in advance.
Wow! Great trainer/ intermediate aircraft and build vid! FPV is just icing on the cake
Brings me back to my first build. Thanks for posting.
My brother and me now have 2 planes😊 thankyou for this great tutorial and the technics used are very nice❤ we cant wait to fly them
"Before I say anything, I want you to know? I Greatly appreciate you. Would you believe? This was exactly how I was one time ago. I always use to take my time and construct model airplanes from foam board and fly them when they are completed. We share the same interest. I love how you measured the center of gravity in relation to the battery's pitch for easy control and stabilization of the aircraft. Your project was a good flyer. It is good enough to market and sell at a profitable rate due to the electric easy start system. I would like to be friends with you, we share common goals. You are a great builder. It was simple, but? It was done properly; That was the achievement due to success." Good, Job! I appreciate you. 👍
Nice project for dad and the kids! BTW Great looking flying field!
Thank you for sharing................
Cheers mate Thanks for sharing May God Bless You!
Чем проще тем генеральный! Отличное пособие для начинающих авиаторов! Однозначно лайк
This is one of the best DIY airplane I have seen
Love your RC planes builds ❤️❤️ a lot!! And I'm trying to make one 😁
0
00
Lbbj
Excelente muito bom mesmo, estou tentando aprender, mas até agora já quebrei vários vou construir este aí pra ver se consigo voar ... Obrigado pelos tutoriais .
Você está de parabéns, ótimos vídeos.
Qual material ele usou? Tipo, papelão? Isopor?
@@ponteirodorato ele usa um tipo de "papel" chamado foam board. se tu tiver no brasil tbm chamam de papel-pluma... na kalunga tem so que eu nao achei com a laminação de papel kraft marrom
Esse papel - pluma revestido com craft não se encontra em lugar algum aqui! Vou é procurar um papelão de alta densidade.
@cursor
Esse material se chama foam, no Brasil é bem difícil de se achar ou muito caro, no mercado livre vende.
O foam nada mais é do que uma placa de XPS(mesmo material das bandejinhas de carne de supermercado) porém, com uma lâmina de papel nos dois lados.
Na realidade do Brasil é mais fácil fazer com essas placas de xps, que em alguns lugares é chamado de depron tambem, mesma coisa
Fantastic clear video. I used to fly glow fuel planes as a youngster and would love to have a go again. This looks ideal but it does look a bit fast for my reactions learning again 👍
Best landing I've seen in an homemade rc
ชอบช่องนี้มาก สอนละเอียดดี
ดีกว่าบางช่อง ห่วงวิชา
Muito da hora o aviãozinho, parabéns 👏👏👏👏
Thanks for sharing your skills and expertise, you make it look easy! I'm in the process of trying this build and struggling a bit with making the wing. I couldn't readily source the Kraft type foam board. How important is the type foam board? I sourced some foam board, Elmer's brand 20 X 30 inches from our local Wal-Mart, $1.77ea. It seems to be of fair quality but doesn't seem to want to make the sharp bend around the spar as easily as shown in the video. In the video it looks like your just scoring through the paper on the 1cm spaced lines, is this correct? Maybe it just takes more practice to get the hang of it. Mine seems to break open as I'm flexing it around the nose of the spars, probably my cuts are to deep.
Kraft foam board is different from insulation foams. The outer surfaces is covered with paper (kraft type paper). In this way, it is more robust. And it is more suitable for bending operations. Insulation foams do not allow large angle bends. In this case, you can cut the lower and upper surfaces of the wing as two separate pieces. And then you can paste it to create the wing form.
@@Kendin-Yap Please make a video on DELTA WING as well, I made it but it didn't flew, I damaged one of my Wooden Props as well, So plzz make a video!
@@Kendin-Yap phane
Thanks a lot. I've made one for my son and it flyes very nice. Congrats!!!
Your skill is very resonnable and wonderful! I will mimic your model plane. You did a good job!
Wow! I love it. You're quite a good pilot too. Thank you for sharing 😇😇
I love this. I hope to build with my grand son.
Soo amazing❤
Started flying again after 15 years away and was shocked that there aren't any affordable (glow) trainers available. I came across your video and thought "what do I have to lose?" I doubled the specs and put on a .28 glow engine and the thing flew great! I'm now building a 250% version (80" wingspan) for .40-.60 size glow. Thank you, much easier on my old heart crashing a $10 plane than a $300 one...
I'm new to this so can someone explain what glow is...
@@therApist69 similar to a gas engine
@@therApist69 nitro engines
Not only is this a very good video, it might as well be the most affective asmr vid lol
This comment is what I was expecting
So far, I have built two models based on your designs. They are amazing!
@Richard 150$ maybe
Been flying model airplanes since 1959 from C/L to R/C. I build about the same sized airplane. I use Balsa and a .049 engine and 2 channels of radio. Fly all afternoon on less than a Quart of fuel.
Your videos are wonderful, I totally loved it. I was wondering if you make a giant plane with 4 brushless motors, wider wingspan and larger in scale. I was willing if you perform 25Kilometres round. I am willing to make such a project as well. But the battery in low size isn't allowing me to do.
Yes bro its amazing keep it work
25 km wao
I want to see your plan videos plz
Hey
Omg!
Your skill is next level and you say this is for beginners 😅
Very gracefully done airplane buddy!
Hahaha I think for skillful beginners....like me I am new to flying rc planes actually I do have a 2 channel beginner plane and with 3 or 4 times I have flown my plane....and saw this video....I am interested in building my own plane and this is a very good tutorial and very informative approach for creating a diy plane....I want to try creating a 3 channel not much advance like the owner of the video. But indeed he's very skillful and a genius!
@@rodrigonagrampa i would reccomend getting a rtf one first, like the sport cub s or 500. They have 3 modes and pre-built gyros and are easy to fly
Great video tutorial...
Thanks..
I'd have made one if I'd all the parts available in Bangladesh
I'm waiting for the 2nd propeller to 3D print.. and waching this dude got me so many ideas!! Thanks
Amazing build - Thank you for sharing it with us.
Très bien comme vidéo, bravo pour cette présentation et réalisation !
Saya senang kamu mau memberikan pola beserta ukurannya.jadi orang lain bisa belajar dan pintar membuat pesawat mainan untuk anak"nya AWESOME GOD JOB 👍👍👍
Thats a hell lot of precision and perfection right there . Good job buddy 👏
Man when the camera captured the wheel in take off and landing.. that was soo satisfying. Am going to try this out.
I feel satisfied! No gimmicks no jokes.. it worked! Definitely subbing!
تم التصميم والتطوير ثم التطبيق
نموذج رائع جدا
+ تدعيم الفلين ب لصق شفاف
One tip, put everything in the center so it flies straight.
I was looking for something like this . Video with measurements . Thank you from Kerala , India .
Malayali da
chumma poli
Pinnale
Mallu pewer
Dhe malayalee
Great job! I love your video! Now it is much easier for me to understand how to make a rc airplane!! Great Job!!!
Ha par electronic saman khaha se milta hai please tell
@@samrpitindianclassicalmusi2783 amazon
I bought exactly that type of plane 40 years ago. I built that using all the compartments in your video (these compartments were already cut). TY for reminding...!!!!
I loved how I could draw my own templates on my foam board.If I tried to print them my plane would be so bad😂.Please do another one like this.
Mükemmel olmuş. Elinize ve emeğinize sağlık
this is my first time on this channel
i clicked on subscribe just after watching 5 mins
He could be lying
@@r.a.tshorts17 the real question is: IS HE?
OMG SAMEEEEE
Looks great I like the way you did it building one now.
Thanks it is awesome it was flying like a real aeroplane 🎉🎉
dear sir, the making of trainer is superb than flying.the bgm and other sounds are entertaining.thank you boss.congrats.
Welcome to Hobbycornerkerala.
@@hobbycornerkerala hi pls mention your link.thanks.
I never imagined that creating an airplane would be this much easier.
perfect!!! thank you from Russia!!!
Im acutaly a kid and i wana be a engineer when i grow up so im starting at grade six and this might help me learn alot about engineering sice i watch alot of engineering and all the basics ty
im actually a kid too and from korea
Awesome !! It's so stable and flying perfectly. I really love your video footage on maiden flight, it's so beautiful sight of landscape.
WTF, I did see the plane only fly at a high speed, andthat was to fast and too small for teaching any new RC pilots.
Emeğinize sağlık çok keyifle izledim.
Z
It's nice but I still think that glider with electric engine is the best learning tool
I build it an it fly very well thanks
Hocam ben kendimce başarılı buluyorum seni ve severek takip ediyorum. Yaptığın şeyi değerlendirecek ustalığa sahip değilim ama çalışma vizyonunu beğeniyorum.
Thanks for your incredible job!! You are a master!! Congratulations!! Excellent video too!!
Unlimited motivation..✊
Thanks man 🙏
I learned a lot from your video and was also inspired by your sensible production methods. Thanks~!
THERE YOU GO! :d
good
Where are you from?
Best and simple plane to make and enjoy
أنت مبدع حقا
One of the great video with full information 👏👏
inanılmaz güzel işler yapıyorsunuz . izledikce bu hobi merakımı gerceklestirmek istiyorum, birgün deneyeceğim :)
o gün bu gün
Hello! I am from Ukraine, you are TOP!
Your creation and video are amazing.
Pretty good, I enjoyed watching and thanks for sharing
Great job!
I'll build that, now I'm committed. Thanks for the video
Are there actual A4 plans to download for the airframe itself or do I just use your posted measurements since they're just straight lines? Forgive me, I haven't built a diy foamboard plane yet. Further, I want to try this this with DTF, Depron or Thermocol. See any issues concerning those materials?
I love your videos! Very well produced & to the point! Thanks!
There is no proportional plans. It's not necessary either. Dimensions can be easily applied and cut. Insulating foam can also be used. But it is very flexible. It is not rigid like Foambvoard. So extra support will be needed.
@@Kendin-Yap The Depron will be plenty strong for this particular model despite not having the paper. I've got some 3-6mm board. I might go with a smaller motor, too.
Çok iyi bir içerik! Heyecanla takip ediyorum. :D
Loved the video..thank you so much for making this video..it was really helpful
gerçekten kedi rc usçağımı yaparken bu video dan örnek almak çok iyi oldu ellerine sağlık
Built it, flies amazingly into a tree
Hi, thanks for your excellent videos. I am collecting all elements to build this aircraft with my son. But in your list, the battery proposed comes with a XT30 connector while ESC has XT60. Is it compatible or do we have to modify one of them ?
Thanks. Since there is no standard for battery sockets, you should make the necessary changes.
It is compatible
Most liked part of the video was BLDC holder 💯💯💯 and beautiful landing also👍👍👍
it must be a lot of fun ... congratulations got too much.
Very thankful, Please keep it up. ❤❤
Gap yo'q. Men xam shundan yasayman
I can hear bass in the music. EPIC !
Its an amazing RC plane
I am trying to make a RC plane like this
This is my first build thanks it flew very good 😊
Very good you are good pilot i liked it congratulations!
Beautiful work, my friend! Really nicely done! 😃
Sorry for the absence, I haven't had enough time lately. 😕
Stay safe there with your family! 🖖😊
Nephew used this same procedure to build a spitfire for me. Excellent work ✌
Very nice .
Magnifique technologie❤
DUDE THANK U SO MUCH UR AWSOME
yeni başlayanlar için güzel bir uçak projesi rc uçak parçaları hakkında bilgi sahibi olmanızı da sağlıyor basit ve güzel bir uçak