D2 DUO, install and wiring guide

แชร์
ฝัง
  • เผยแพร่เมื่อ 19 ธ.ค. 2024

ความคิดเห็น • 18

  • @MapexNJD
    @MapexNJD 6 หลายเดือนก่อน +3

    Just did this install. Worked really well. Was expecting the rear camera to be a pain but it was smooth. Thanks for the video.

  • @dryvur
    @dryvur 8 หลายเดือนก่อน +2

    This is the best so far. I read the manual and watched the videos and installed the cameras. It took me about 1 1/2 hrs to do everything. And it was really easy. I though it would be a bear, but not bad at all. Has a great picture. For the money, this camera can't be beat at this time.

  • @therealfodder
    @therealfodder 4 หลายเดือนก่อน +1

    Very useful instructions - thanks! My only issue was with the antistatic strips - especially on the front. The weight of the camera just pulled it straight off (I did wipe the window first - honest!). I ended up going straight onto the windscreen.

    • @logan4179
      @logan4179 3 หลายเดือนก่อน +1

      I've just had the same problem with mine. The static strips seem to be really weak. I think I'll try doing the same thing and bypassing them.

    • @therealfodder
      @therealfodder 3 หลายเดือนก่อน

      @@logan4179 good luck! It’s been a few weeks now and mine is holding fine

  • @bmbrooklyn
    @bmbrooklyn 2 วันที่ผ่านมา

    Thank you for this video

  • @TD-ej7ix
    @TD-ej7ix 6 หลายเดือนก่อน +2

    If you're worried about cable length....Run your cables from the driver side (instead of the passenger). If it's really too short you can buy a longer cable, fairly inexpensive and should be available from standard stores selling phones, electronics etc.....

  • @VWBRUCE
    @VWBRUCE 7 หลายเดือนก่อน +2

    Very good video . I ran into a problem. The static cling did not work. I cleaned the windshield with windex. Applied the static cling per the video & it did not hold the dashcam to the windshield. The static cling film is attached to the dashcam just fine but the cling does not adhere to the windshield. Did I miss something? Any suggestions would help. Thank you.

  • @HarutoFuryo
    @HarutoFuryo 6 หลายเดือนก่อน +2

    I just bought this and I'm watching your video, but I'm like... BRUH, we have 2 completely different cars! I don't think I have all those cracks! 😂😂😂 I'll try now and comment later about what happened! I hope the wires REALLY ARE long enough! 😅😅😅

    • @TD-ej7ix
      @TD-ej7ix 6 หลายเดือนก่อน

      I you are worried about câble length......Run the wire th

  • @Dapahk5
    @Dapahk5 ปีที่แล้ว +2

    What is the wide angle view on the front and rear camera?

  • @rl3569
    @rl3569 7 หลายเดือนก่อน +1

    This video was SUPER helpful. And I loved how you explained and showed the lineage of the cords. Most videos don't do that. Thank you for helping me install my cam. I really appreciate this video.

  • @billburgess9100
    @billburgess9100 หลายเดือนก่อน

    Would have been nice to show how the controls/buttons work and setting up.

  • @MrDsalomon
    @MrDsalomon 5 หลายเดือนก่อน

    Excellent camera, and the electrostatic sheet is an added benefit. Just a minor point. Every time the D2 Duo starts, the screen displays the front view, regardless of what view the user has previously selected. I hope Focuway can improve it in the next firmware update. It is pointless to see on the camera screen what you are seeing through the windshield.

  • @DouglasHendriksen-v3m
    @DouglasHendriksen-v3m หลายเดือนก่อน

    Why do we need to avoid window tint?

  • @yinyangg87
    @yinyangg87 5 หลายเดือนก่อน +3

    The way it's pronounced is cracking me up

  • @tanyutou
    @tanyutou 8 หลายเดือนก่อน

    It is not safe to block the A-pillar airbag with the wires