Bullet seating press with load cell and auto drive
ฝัง
- เผยแพร่เมื่อ 17 ก.ย. 2019
- We have just finished writing our latest study, "Annealing under the microscope Part 4" and we decided to make a quick video showing how our new Bullet seating tool works with its load cell capability.
- กีฬา
Very interesting video. Thanks for posting it. I've always brushed the inside neck prior to tumbling or ultrasonic cleaning. I mostly tumble everything now and my final step prior to priming and loading powder is to run a cotton swab moistened with alcohol into the neck to remove any residue. I can get very consistent velocities and some really good extreme spreads and SDs.
No Primer + No Powder: No air is being trapped in the bullet case during seating. Does this increase the seating force requirement? Test should be revalidated with real time condition? thanks for posting this video.
Not sure about a conclusion but the commenters below raise some really interesting points to consider
Would it be a good idea to combine annealing and changing bush for stable neck tension?
Love my AMP annealer...dumb question here: what are we to do once we finish seating our bullets with this machine? Not sur how this advances the process
This is more of a diagnostic tool. With it you can now see the actual seating force of each bullet seated. This allows you to compare seating forces over the entire batch and potentially cull any ones which looked undesirable.
How do I get one ? I looked at the web site and found nothing
Have you cleaned the cases prior to the test?
Does ultrasonic cleaning alter the need to brush the case neck interior?
We have not tested this yet but will in a further addition to this study.
@@annealingmadeperfect1257 wondering the same thing if using media
@@annealingmadeperfect1257 we would be very interested in sensitivity from just ultra sonic cleaning. Thank you!!
This Product,looks great and will do the task, when will it be available, or are plans available to purchase , kind regards
We are currently making the first 10 beta units. after the feedback from them we will start production. We currently do not have a release date but hopefully it will be before the end of the year.
@@annealingmadeperfect1257 Thanks for that guys , again very much looking forward to your release date ,as a long range shooter , this will be very good to use . cheers Dave
Where can I purchase this setup? Thanks.
We are releasing the very first batch mid to late March. We have come along way since this video. Here is a more up to date video: th-cam.com/video/dDIDkYJqXuo/w-d-xo.html
It would have been more interesting if you had measured the power needed to pull the bulit out of the case.
We have done that years ago. You may be interested in our first study on the subject, Please note that this was our first study and we have come along way since then: www.ampannealing.com/articles/55/annealing-under-the-microscope/
The engine is too weak. To get the right result the time must be equal.