I think i would add a hinge to the bottom of the tail gate so you can flop it down to extend the bed legnth. Also a manual locker for the rear differential would be cool. LOVE it though!!
A small matching trailer wouldn't be bad, and the vehicle could still use red LED light at the rear. A super vehicle, is certainly a lot of fun to work with.
That fuel tank looks like it's perfect for hitting your funny bone while you are trying to steer. I think I would've added a fuel pump and put the fuel tank out of the way.
What about tank ventilation? when emptying the tank, you will need to somehow allow air to get in, otherwise it will quickly get sucked in, which will create air in the fuel lines, meybe some one way valve on the top?
I think your next modification should be a tow ball on the front and rear of your garden tractor part of the video. There was a water container on a trailer in a field which means you could use that garden tractor to tow the water container in and out of the field, making it even more versatile. I’m not sure whether you’ve ever pushed a trailer. I would suggest you try it makes it very easy to get it into tight spaces as you can see where you are going and you will see what I mean when you do it if you was pulling a full load on that size of container you might need to put some ballast in the back of your garden tipper trailer tracto to give it extra traction but I think you would be surprised how much it can actually pull. I’m not sure but I think the water container on the trailer, in the field was 1000 L IBC when fully loaded means it will weigh a metric ton. I was just thinking it would be your next best upgrade. Love your video would like to see it doing some more work. Cheers, Derek.
Witaj. Naprawdę fajna maszyna. SZACUN. Coś podobnego tez muszę zrobic. Wspanialy pomocnik na gospodarstwie i nie tylko. Pozdrawiam serdecznie i z niecierpliwością czekam na dalsze projekty.
Musisz zrobić maskę i zderzak, a będziesz miał pełnoprawny pojazd do prac domowych. Nie wiem, czy dobrze to przetłumaczyłem, tłumaczenie pochodzi z Tłumacza Google!😊👍🏻
wrong fuel filter for gravity feed carbs...you need a mesh/sintered style filter often recognized by the red end cap... the paper element doesn't flow enough fuel at above 1/2 throttle and will cause fueling issues which were audible in the video when you throttled up that hunting/surging of the engine on its governor is the carburetor starving for fuel
I used a pulse pump, but it was still too powerful. The carburetor is old, and therefore the seals and valves are not in the best condition, so I decided to use a gravity solution, where the pressure is very low, but sufficient.
if only quick connect on the "gas tank" so you can just go fill it directly, lol! But then you'd need a valve and a way to keep it stable on the floor and naaaaaaaah too much work.
Smarem się opon nie smaruje do nakładania jest do tego pasta albo mydło smar nie wysycha i oponka może się po feldze przemieszczać co nie jest wskazane w kołach napędowych.
now make it powered by AI so it can do all the driving for you while you watch it, crackin' a cold one in one hand. yes i know AI is scam, let me dream.
Wszystko dobrze jeśli ma się dobrze wyposażony garaż w tak skomplikowane narzędzia. Facet niech się zabierze za uczciwą pracę i przestanie nam przedstawiać tzw pierdóły celem nabijania kasy za męczące nas głupie, idiotyczne I pozbawione sensu reklamy, bowiem o to tutaj chodzi w tym przedstawionym filmiku ... Myślę, dumam a nawet kontempluję, iż wyraziłem się konkretnie ,rzeczowo I bardzo merytorycznie . It is clear for you ?
Tolle Idee und sauber umgesetzt, aber aus Prinzip würde ich ne Motorhaube drauf bauen😂👏
I think i would add a hinge to the bottom of the tail gate so you can flop it down to extend the bed legnth. Also a manual locker for the rear differential would be cool. LOVE it though!!
Little disappointed that there was no drinking of warm beer after the work was done, lol
lol, warm beer.
Unfortunately, I can't show such things because TH-cam limits the reach of videos 😉
@@MadeinPolandChannel good move!
That would be a behind the scenes thing so go ahead and raise " your drink " with him.
@@MadeinPolandChannel Yeah, God forbid YT lets you show something that's completely legal being done !
nice project, but you should really check if the beer is actually working.
LOVED THIS BUT TRUE!!!
I liked watching you revisit an old project and improve it. Would love to see this kind of video for more of your projects.
A small matching trailer wouldn't be bad, and the vehicle could still use red LED light at the rear. A super vehicle, is certainly a lot of fun to work with.
That is a lot cooler looking than a store bought machine! What a beast!
Cool tool brother, nice little workhorse! Should name her the “Third Hand!” I’m sure you’ll get a lot of work out of it to come.👍🏼👍🏼
6:27 under arrest for 9999 years for not using the new legally mandated """"spill proof"""" cans xD
Engine is hunting, starving for fuel because those cans are not vented. Carb is pumping trying to suck fuel against the pressure.
The electric pump would have worked if mounted on an angel.
he used the wrong fuel filter causing the hunting above idle it should be a red cap fuel filter (sintered metal or mesh filter)
You made a lot better, the old house as well.
👍💪✌
Мда, наверно у всех поляков привычка диваны выбрасывать у дороги!! Европа однако😂😂😂
Great update on the heavy hauler . Sure comes in handy around the place. Well Done 👍
That fuel tank looks like it's perfect for hitting your funny bone while you are trying to steer. I think I would've added a fuel pump and put the fuel tank out of the way.
Cool, I will suggest that you add some sort of safety lock to prevent the bed from tilting when you don't want it to.
What about tank ventilation? when emptying the tank, you will need to somehow allow air to get in, otherwise it will quickly get sucked in, which will create air in the fuel lines, meybe some one way valve on the top?
It just loosens the fuel tank cap every now and then and that's it 😁
You can swap the fuel cap for an ON/OFF ventilated type, like the ones fitted to petrol generators.
I have learned so much watching your videos. My favorite channel on TH-cam.
Thanks 👍😊
An air ride suspension would be a cool upgrade
Yes, and it would keep the beer from getting shook up too bad! 😂🤣
Всё здорово сделано, а где амортизаторы, или пружины?
Excellent work, friend👍
I only saw one can of beer, and no ice. More beer please.
Your working equipment is very complete
Glad to finally hear your voice
Just a suggestion. Perhaps consider adding an electric fuel pump instead of the mechanical one.
There is no mechanical one. It's gravity. That's why he had to raise the tank elevation. To get more fuel supply pressure.
That thing still has more bed space than most americans' pickups 😂
This project is awesome, but I would prefer the bucket to be in the front rather than the back
I put a trailer hitch on mine for pulling and trailer usage.
I could use this to cart my firewood to boiler
Ah nie ma jak to twoje filmy po pracy
Koła nie zostały wyważone po wymianie opon, dlatego tak rzuca. 😉
I think your next modification should be a tow ball on the front and rear of your garden tractor part of the video. There was a water container on a trailer in a field which means you could use that garden tractor to tow the water container in and out of the field, making it even more versatile. I’m not sure whether you’ve ever pushed a trailer. I would suggest you try it makes it very easy to get it into tight spaces as you can see where you are going and you will see what I mean when you do it if you was pulling a full load on that size of container you might need to put some ballast in the back of your garden tipper trailer tracto to give it extra traction but I think you would be surprised how much it can actually pull. I’m not sure but I think the water container on the trailer, in the field was 1000 L IBC when fully loaded means it will weigh a metric ton. I was just thinking it would be your next best upgrade. Love your video would like to see it doing some more work. Cheers, Derek.
You just need to get one of little chineese excavator and you ready to start construction bussines😂👌
Great vehicle, nice improvements
Witaj. Naprawdę fajna maszyna. SZACUN. Coś podobnego tez muszę zrobic. Wspanialy pomocnik na gospodarstwie i nie tylko. Pozdrawiam serdecznie i z niecierpliwością czekam na dalsze projekty.
Widziałem Cię w lutczy , piękna robota 👍
I wonder what ancient Poles did with those dried vines, from Firestarter to wicker baskets maybe....or thatched roofing material
Fantastic work!
Next video: Supercharger and Nitro.
Fantastic work, dude! Really well done! 😃
Stay safe there with your family! 🖖😊
Dibs on that couch Bro 😉looks mint af... 🤣
Nice upgrades there!
I would love to see you fabercate a cab, for it would make for an absolutely amazing video
You need to put the front fenders on
Good job. I would want to have such a machine.
Some very good upgrades for the truck, nice job sir.
Sweet 🤌👌
The best thing is the 🍻 storage 😂 I love your creations , greetings from USA 🤗
Good job mister
Can you build same one with AWD plz
Musisz zrobić maskę i zderzak, a będziesz miał pełnoprawny pojazd do prac domowych.
Nie wiem, czy dobrze to przetłumaczyłem, tłumaczenie pochodzi z Tłumacza Google!😊👍🏻
Very good job 👍
Good Job.👍👍👍👍👍
Love that thing, want one for myselfe ❤❤❤
wrong fuel filter for gravity feed carbs...you need a mesh/sintered style filter often recognized by the red end cap... the paper element doesn't flow enough fuel at above 1/2 throttle and will cause fueling issues which were audible in the video when you throttled up that hunting/surging of the engine on its governor is the carburetor starving for fuel
Brilliant work sir you are awesome engineer thanks for the sharing this video sir ❤😊❤😊
That's a neat little machine! Great utility!
Note he only loaded 1 beer .
A 6 pack or more would probably lead to a 6x6 monstrosity with VTOL capabilities .
Please make a DIY air conditioner
This was so far the only blemish on your record, now you've rectified it (:
Nice machine 👍
as always love your work I also hope the neighboring conflict is not affecting you too much
Tam by się nie jeden kasztelan zmieścił 😄
Have you considered reinforcing that transaxle? Making it stiffer?
And next on the list: "Install proper silencer so I don't drive my neighbours mad".
That would be part of the fun but it would be really really low on the list. The bottom or lower ?
Красава!!!
I'm a bit surprised you didn't make a metal gas tank. The plastic is ok. Jist a bit surprised
I had it in my plan, but unfortunately the fight against time did not allow me to do it.
@@MadeinPolandChannel i can respect that totally!
The 4-cycle Daihatsu HIJET is quiet.
Love your projects. Have you considered a pulse fuel pump if the electric are to stronge?
I used a pulse pump, but it was still too powerful. The carburetor is old, and therefore the seals and valves are not in the best condition, so I decided to use a gravity solution, where the pressure is very low, but sufficient.
👍
Masz może jakiś film który pokazuje jak zrobiłeś tą ściągaczke do opon?
Kupiona na allegro 😉
if only quick connect on the "gas tank" so you can just go fill it directly, lol!
But then you'd need a valve and a way to keep it stable on the floor and naaaaaaaah too much work.
A diesel engine on it and it will last forever :)
Maybe in the future 😉
1.9 tdi
Super
Jak zawsze
Now put a mower on it
@10:46 Did I hear "That's not going anywhere" ??
Problem z paliwem nie wynika po prostu z tego że brak odpowietrznika w tym kanistrze ?
Teraz nie ma żadnych problemów, ze wcześniejszym bakiem i pompką były problemy
@@MadeinPolandChannel wydawało mi się że po prostu robiła się próżnia w baku i dlatego nie leciało
Made in Poland uses a store bought tyre changer?.
Yes, why not?
@@MadeinPolandChannel I thought you’d make a bigger and better one.
❤❤❤❤❤
Piękna robota 💪 Brakuje takich fachowców. Pozdrawiam 🤝
Co to za opony na tyle bo też chcę kupić?
@@zyciebiedaka7603 allegro.pl/oferta/1x-opona-journey-p311-18x9-50-8-33j-4pr-tl-8-r8-18x9-50-opony-15991995596
👍👍👍
No A/C? 😃
Smarem się opon nie smaruje do nakładania jest do tego pasta albo mydło smar nie wysycha i oponka może się po feldze przemieszczać co nie jest wskazane w kołach napędowych.
Masz rację dlatego stosuje paste
needs a hood.
Why is the engine serging so much?
👍🍻
👍🏿👍🏿👍🏿👍🏿👍🏿❤️❤️❤️🙏
That tire machine won’t do. Rebuilt make it powered
Miejscowość za stara wsią ?
Ten mechanik to pewnie z Bliznego?😊
@@nonconformist4208 tamte okolice
now make it powered by AI so it can do all the driving for you while you watch it, crackin' a cold one in one hand.
yes i know AI is scam, let me dream.
Trailer
Mucit
Wszystko dobrze jeśli ma się dobrze wyposażony garaż w tak skomplikowane narzędzia. Facet niech się zabierze za uczciwą pracę i przestanie nam przedstawiać tzw pierdóły celem nabijania kasy za męczące nas głupie, idiotyczne I pozbawione sensu reklamy, bowiem o to tutaj chodzi w tym przedstawionym filmiku ... Myślę, dumam a nawet kontempluję, iż wyraziłem się konkretnie ,rzeczowo I bardzo merytorycznie . It is clear for you ?