Seriously great video. I am about to dive into my 2019 Forester purchased at auction and lost my mind at the prices quoted me by body shops to do this. I'm looking forward to saving some cash. I appreciate all the safety points and the quality step by step instructions. Keep up the good work Eli!
Jud, Thank you for the great feedback! I'm very happy you found the video and I'm look forward on assisting you further with reset services if you when you need it. Body shop hourly / parts costs can be pretty pricey! Whenever you're ready, heres a link for your convenience: www.myairbags.com Thanks again for sharing your experience and commenting!
If the seat belts were not being used (buckled) during an accident/collision, then they are most likely still bad in most vehicles. The pyro fuse will still blow and seat belts usually will lock, but then later, they can seem like they are working properly, but the pyro sensor is already bad.
No, the impact sensor are usually good and dont need to be changed unless they are physically damaged or if you get a code when you scan the SRS Airbag system.
Yes in most newer vehicles a lot of safety features are built to be controlled by the srs airbag control module. If the eyesight feature is controlled by the srs control module then it should be restored after crash data history has been reset/cleared in the srs airbag control module.
Question. Once the airbag control module is disconnected and removed to be shipped out can I connect the battery after to drive the vehicle to move it around the shop?
Its best to keep the battery disconnected to avoid additional programming that could be needed if the battery power is applied while the airbag control module is disconnected.
Super informative video and appreciate you sharing. I'm in the process of removing the back row seatbelts on my 2019 Forester. Turning the car into a mini camper, so I have no need for the back trim/seats/etc. I noticed there are similar air bag modules for the rear seat belts as well. My question is -- if I removed the rear seat belt modules entirely and didn't replace them, would it impact airbag sensors for the rest of the car (driver + front passenger)? Thanks a ton!
Christopher, the rear belts on your vehicle isn't equipped with the deployable type of seat belt, therefore they shouldn't be tied into the airbag system. So it should have no affect on the airbag system.
Yes, you can change just the airbag. It does not need to be new. the airbag is okay. The airbag light will continue to stay on until seat belts are replaced or rebuilt and airbag computer module is reset. Let us know, we can help with the sest belt and airbag module reset, check out myairbags.com for more info.
Our website is myairbags.com. You can also call or text us at 855-770-4055 Here is link for airbag module reset www.myairbags.com/product-category/repair-return/airbag-module-reset/ Here is link for seat belt pretensioner repair www.myairbags.com/product-category/repair-return/seat-belt-repair/
Yes we can reset this unit, clearing crash codes and crash history. Here is the link www.myairbags.com/product/subaru-crosstrek-srs-airbag-control-module-reset/
Seriously great video. I am about to dive into my 2019 Forester purchased at auction and lost my mind at the prices quoted me by body shops to do this. I'm looking forward to saving some cash. I appreciate all the safety points and the quality step by step instructions. Keep up the good work Eli!
Jud, Thank you for the great feedback! I'm very happy you found the video and I'm look forward on assisting you further with reset services if you when you need it. Body shop hourly / parts costs can be pretty pricey! Whenever you're ready, heres a link for your convenience: www.myairbags.com
Thanks again for sharing your experience and commenting!
Can you tell me where the satalite safe sensor in the Subaru crossed 2012 model is located, please
Should be under the hood, near the radiator.
@@MyAirbags
Thanks for the reply. I found it later. It is located under the rear middle seat towards the leg room.
Do the seatbelts deploy even if they arent connected? Is there a way to tell of they deployed?
If the seat belts were not being used (buckled) during an accident/collision, then they are most likely still bad in most vehicles. The pyro fuse will still blow and seat belts usually will lock, but then later, they can seem like they are working properly, but the pyro sensor is already bad.
In addition to replacing the SRS Module and blown air bags, do I need to also replace air bag sensors?
No, the impact sensor are usually good and dont need to be changed unless they are physically damaged or if you get a code when you scan the SRS Airbag system.
In this vehicle will eyesight be disabled after airbag ? How can I enable eyesight after it has been fixed
Yes in most newer vehicles a lot of safety features are built to be controlled by the srs airbag control module. If the eyesight feature is controlled by the srs control module then it should be restored after crash data history has been reset/cleared in the srs airbag control module.
I got my airbag back from you guys what is the proper procedure to reinstall is this plug a play now after repairs ?
Nice 👌
Thanks 😊
@@MyAirbags i sand my order. Little praise 😏. 300 for 2 belts and module.
Question. Once the airbag control module is disconnected and removed to be shipped out can I connect the battery after to drive the vehicle to move it around the shop?
Its best to keep the battery disconnected to avoid additional programming that could be needed if the battery power is applied while the airbag control module is disconnected.
Super informative video and appreciate you sharing. I'm in the process of removing the back row seatbelts on my 2019 Forester. Turning the car into a mini camper, so I have no need for the back trim/seats/etc. I noticed there are similar air bag modules for the rear seat belts as well. My question is -- if I removed the rear seat belt modules entirely and didn't replace them, would it impact airbag sensors for the rest of the car (driver + front passenger)? Thanks a ton!
Christopher, the rear belts on your vehicle isn't equipped with the deployable type of seat belt, therefore they shouldn't be tied into the airbag system. So it should have no affect on the airbag system.
@@MyAirbags yes they are
2021 Subaru Crosstrek
Can I only change driver steering airbag? It doesn’t blow up.
Do i have to replace with a new one?
Yes, you can change just the airbag. It does not need to be new. the airbag is okay. The airbag light will continue to stay on until seat belts are replaced or rebuilt and airbag computer module is reset. Let us know, we can help with the sest belt and airbag module reset, check out myairbags.com for more info.
I got my module back from you guys is it plug and play ?
Yes module will be plug-n-play if it is going back into the same vehicle.
Is the setting the same as the 2015 xv because am trying to do it myself
My country is full of dishonest mechanics, trust is a big issue
It should be same or similar.
Could you send me information on sending you parts for reset
Our website is myairbags.com. You can also call or text us at 855-770-4055
Here is link for airbag module reset
www.myairbags.com/product-category/repair-return/airbag-module-reset/
Here is link for seat belt pretensioner repair
www.myairbags.com/product-category/repair-return/seat-belt-repair/
Reset 2020 Subaru Outback with 98221AN00A, with chip R7F7016863 ? This one seems to be locked!
Yes we can reset this unit, clearing crash codes and crash history. Here is the link www.myairbags.com/product/subaru-crosstrek-srs-airbag-control-module-reset/
Hello guys! After resetting the srs airbag module crash data. Do you have to program the airbag module to communicate to the vehicle? Thanks!
No you dont, if you send the original airbag computer module for reset then you dont need to have it programmed to your vehicle.
@@MyAirbags what about a 2021 Subaru Forester
Im doing this on the 2021 ascent and i wanna gouge my eyes out right now
It definitely a whole job! Thank you for commenting! www.myairbags.com
@@MyAirbags pays 0.5 hour to replace it
Why
Are you a Subaru tech
Kinda crazy
😀
Thank you