Good job. Any idea why i still have a back left side knocking on my vw passat b6. I have replaced everything on the back suspension, except the subframe bushes. Every time I go over even on the smallest bump it goes klonk🤬. Drives me insane. Cheers 👍
Great job, good to see the young lad getting involved, I was changing brakes shoes by the age of 14 lol.
Trying to get him learning. Youngsters these days find it hard to concentrate on anything in the real world outside Fortnite 🤣
Those bottom bolts on the shocker you made look easy, i use a breaker bar aa mine was rock solid and one snapped in the hub.
No grease. That aluminium looks like ots welding to the bolt. Had the same issue with them 😁
Great job!!!!
manual says to space the ride height before tightening lower bolt, to 380mm - is this an essential part of the setup, or can it be 'done by eye'?
Good job. Any idea why i still have a back left side knocking on my vw passat b6. I have replaced everything on the back suspension, except the subframe bushes. Every time I go over even on the smallest bump it goes klonk🤬. Drives me insane. Cheers 👍
Where you jack the car up? Position?
I have a mk2 octavia, 2 new pairs of shocks fitted and still fails nct for imbalance, what could cause this besides shocks
I have a knocking sound on rear driver side on slow speed. Any suggestions? Thank you
Good job, but would have been better if you had degreased the leaked fluid off the cover and bump stop:)
Great
Thanks
Great job ..you make it look easy ,, but you wouldn’t drive my car with them mucky hands
We carry grime wipes 👍🏻
Ye I’m joking ....any idea how to clear a exhaust pressure sensor pipe ..Nissan qashqai 1.5 dci
@@grahamdunning294 remove it and spray brake cleaner through it. Use some old bicycle brake cable to rod it through
Good job
Thank you
That's too clean underneath to be an Irish car😉😉