HARBOR FREIGHT CEN-TECH POCKET READER VS OTHERS!
ฝัง
- เผยแพร่เมื่อ 4 ก.ย. 2024
- So let's take a closer look at this Cen-Tech Pocket Reader vs. a couple other options that are available. Links down below!
LAUNCH CReader HD Plus Heavy Duty Truck Obd2 Diagnostic Reader OBDII Scan Tool CRHD Truck Code Scanner With OBD-II Communication Modes 1-10 and J1587, J1708 and J1939 protocols:
amzn.to/2ZEYtlO
LAUNCH CR3001 X431 Creader 3001 OBD2 Scanner Automotive Car Diagnostic Check Engine Light O2 Sensor Systems OBD Code Readers Scan Tools:
amzn.to/2NNhz7c
I'm just a DIY type guy and have been using Torque Pro software the past 3 years on an Android with an inexpensive Bluetooth reader. Its been fantastic. All for about $30. Its accurate, no wires, no habitual clicking through settings, etc.
Just bought one and it's all I wanted. something to pull codes and clear codes.
I bought that C reader upon watching your review of it I like it over others I’ve seen.
Me too. Cheers Brotherman and I'm glad your loving the creader as much as I have been.
Justin Dow thanks it’s it’s simple and does the job.
Thanks...I have the Cen-tech from Harbor Freight. While your video was playing I order from Amazon the Creader 319 like you have. Thanks for the video. Cheers
I’d recommend the Ancel VD500 for an at home scanner for a VW owner. It can control the electronic parking brake and reset the oil life monitor
I was thinking about this code reader, I like HF and they have a lot of good stuff if you can figure out what junk to avoid, but I think this reader is just too small and the screen is too. It would probably work ok for some stuff, but I'm glad I decided to shell out $92 for the Innova 5210 from advance auto parts, if they can ever get it to me.
Ive been waiting for your video on this lil puppy!! Mine does alot more, like your other one you were using. I have a $120 Actron, but my next one is gonna be in the $2500 range. I want one that can do some programming and isolate different components. Great video!!
Great video I love the review on the Grearwrench Bolt Biter. Take a look at the ZURICH ZR4 OBD2 Code Reader ($45) it does a good job. I think it will be as good as the CReader VI ($45). I if the one from HF breaks or I find something better I got the 90 days to bring it back. Keep the new vids coming.
Shit I thought when you cleared codes. You didn’t have to repair the car. Hahaha love warning labels. Good video Justin.
Sold ! I liked your video review on this scaner. I was about to go buy it from Harbor but I will use your link. I will subscribe, good job again👍
Justin let’s see some more gear wrench hauls !
I bought the innova 6100 3 months ago it was 120 dollars but it's a good scanner so far it also test battery and alternator I'm going to buy the autel maxi pro this week it's a reset tool it does a lot like reset electric steering and mantince lights and will bleed electric brakes as well
Nice!!
Good video. Thanks Justin.
Thanks for the review. i almost bought the Cen-Tech.
Vw’s always have CEL😂
Thank you 😊 This what im looking for great review !!!
C reader for the win.
i had been having issues with a miss in a grand marquis, went to a guy who runs a shop and he hooked his expensive snap on computer to it and found nothing... i bought this tool at HB and found the code instantly, bad coil..
Awesome video brotha keep'em coming always good to know what's good and what could be better
Wish I would have seen this before I bought the cen tech
Good video Thanks for the information I wanted to see if your truck had any trouble codes and I want to know how you repaired the VW
Thanks for introducing the CReader!
Bought this today thought it would tell me which cylinder is missing it doesn't so what exactly is this for i know my truck is missing . Just wanted a short cut . This thing is a waste of money. and ,yes i know how to diagnosis the problem whith out it . Just thought this thing would make thing easier.
I bought this for my Aunt's 2010 Explorer. It was fine one day then the next it wouldn't start. Thought the gas line was froze, but it's thawed, more fuel, and an additive. Nothing still. I must not know what the hell I'm doing with this reader. I despise computer cars
I think I'll stick with my bluetooth scanner and Torque app
Dow maybe more time with the now scanner then due a video again thanks for the video
Thanks
I just tried this exact reader yesterday, buying a used car. It just said no codes, so hopefully that means good things. Lol.
Thanks for the review
Good review.
Can you please place the camera so that the reflection obscures the entire screen.
Cool
why did you not rescan the vw?
Yeah brother
What is the yellow question mark ❓
I have a airbag light on my dash that stays on. Would I be able to use this to clear it?
So the, " erase" button erases all the bad codes in your vehicle? In other words, if u have a code reading in your car just needs cleared to keep it from dinging on your screen to your vehicle, will this do the trick? Ie., i had a check engine light on, a friend said i could take it to autozone and they could put it on a computer and clear it. Is that what this would do????
jay flo-tripple-4 Yes
I have a coil misfire will this scan tool tell me which cylinder it is so I can replace it 2012 Chevy Silverado 5. 3?
No. This scan tool is very limited you'll need to buy the next model or two up from the pocket reader. Cheers!
Justin Dow
Will the Launch Creader products tell which cylinder is misfiring?
Swap the coils around
Justin will the Creader CR3001 tell which cylinder is misfiring? I have an coil misfiring intermediately and not triggering the check engine light. I am trying to figure out which cylinder it is. Only other thing I can think of is to check cylinder temperature.
Is the scanner updatable?
I have the frist gen haberfright code reader an like it for what it is
Wow what a cheap scanner. Spend a little more I'd say. Not a good scanner. Even just for codes. That's like using window 95 trying to fix a car. I mean for a home owner its OK to read codes only. Should not be in a shop at all.
Im Reptar it’s not a scanner, it’s an obd2 reader. Scan tools do a LOT more
So you said that car was a 1996? If so i could use this on my chevy cavalier
Yuppers! 96 and Newer and believe it or not I've even seen a couple of late model 1995's that also had a OBD2 DLC Connector.
Yeah i need the adapter for my car
Do you know if this reader will detected a low tire light & tell what tire it is ? - LAUNCH CReader HD Plus Heavy Duty Truck Obd2 Diagnostic Reader OBDII Scan Tool CRHD Truck Code Scanner With OBD-II Communication Modes 1-10 and J1587, J1708 and J1939 protocols:
Hey quick question. Can the c readers detect battery and alternator issues?
They are about $33.99 now
Always good 👍
For the guy that gave the CEN-TEC a thumbs down and for all you guys that tested the 60693 you should have done your research a little better.If you would have you would know you were holding a item that was pulled from the shelves 2 weeks after they found out the put the 1800 dollar software in the wrong Scan Tool . It really is a Scanner and diagnostic s.I use it in my race car Honda K20 A motor.I can change things up at different RPMS.Retard timing.There is another scanner that you update it from.It is the $2200 scanner that Harbor Freight sales.with coupons I believe it's 1800.When you up date your CEN-TEC 60693 with that Scanner I have the link .If you have that model you would not believe how many more PIDS.For $79.00 You just got a $1800 scanner.
Thanks!
Great review! I think Harbor freight has gotten way to expensive.
If "Clearing codes does not repair the vehicle" what about removing the SES/CEL bulb? 🤔 ... 🤣🤣🤣
It reminds me of people who hear a noise from their vehicle turning to radio up to ignore it
just put a little electrical tape over it
It's a C reader 6
VW only takes VW equipment...thus an error...!
Sad that they had to add that sticker to the back. You know it's because they had people returning them because "clearing the codes didn't fix my car!" How dumb are people? lol
lol
That screen is garbage cen
I keep getting link error
me too did you figure out how to fix that?